FXR Clutch, Driveline & Trans

Thrashin Supply Harley Derby Covers - Twin Cam/ Evo The Thrashin Supply Co. Classic Derby Cover is constructed from tough billet aluminum. Not only does this look super clean and sleek but it's durable so it'll last. Available in your choice of polished...

Drag Specialties Primary Chain This primary chain by Drag was designed to last made using high quality raw materials.  Features: Improved fatigue resistance Pre-loaded to reduce initial elongation Endless construction using...

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '80-'93 FLT, FXR

Mueller Motorcycle AG - Power Clutch fits '99-'23 Big Twin Models w/ Mechanical Clutch Features: The original Müller Power Clutch Replaces OEM inner and outer ramp assemblies 45% easier clutch lever operation Easy to install; no drilling or...

Feuling - ARP 12-Point Primary/Transmission Fastener Bolt Kit fits '85-'99 FXR Model Features Tensile strength rated @ 170,000 psi; superior and stronger than OEM and stronger than grade 8 fasteners Manufactured by ARP to Feulings exact...

Drag Specialties - Gloss Black Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties Rear Wheel Sprockets Convert your rear drive belt to a 530 chain with the Rear Wheel Sprockets by Drag Specialties. Available in 46, 48, 49 and 51-tooth. Features: Convert rear drive belt to 530 chain Steel with a gloss black...

Drag Specialties Clutch Shell fits '84-'89 Harley Big Twins OEM #37707-84 Replacement clutch shell with starter gear. Fitment 1986-1989 Harley-Davidson Softail Custom FXSTC 1984-1989 Harley-Davidson Softail Standard...

Drag Specialties Chrome Rear Sprocket For 530 Chain - Early (locating ring 1.980) Timken Bearing High-grade carbon steel replacement rear wheel sprockets 1.9" center hole

Drag Specialties - Primary Chain Inspection Cover fits '85-'94 FXR Models W/ Mid-Controls (Repl. OEM# 60642-85) Drag's Primary Chain Inspection Cover is designed to be used with mid controls. Features Chrome-plated steel construction Uses OEM...

Drag Specialties - Clutch Shell fits '94-'97 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-94. Features Replacement clutch shell with...

Drag Specialties - Chrome Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties - Inner Clutch Hub fits '90-'97 Big Twin Models Replacement OEM# 37550-90A Features Improved inner clutch hub with reinforced insert Accepts all OEM components Fitment 1997 Harley-Davidson Softail Heritage Springer...

Drag Specialties - Clutch Shell fits '90-'93 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-90. Features Replacement clutch shell with...

Joker Machine - Billet Derby Cover fits '70-'98 Big Twin Models - Chrome  This Derby Cover is available in your choice of a finned or smooth design. Features Include mounting hardware Made in the U.S.A...

The Alloy Art Shifter Shaft Primary Plug: Used when adding forward controls to FXD, FXR models and eliminating the mid shifter shaft Plugs holes in inner primary cover for a finished look Anodized billet aluminum, complete with O-rings, bolt and...

James Gaskets Gasket Kits use state of the art materials and production methods to make the best gaskets available. Made in the USA Fitment: '94-'04 FLT, FXR

Drag Specialties Transmission Top Cover for Harley Big Twin '87-99 Chrome top transmission cover compliments other chrome engine and transmission pieces. Please make sure you check the fitment table below to ensure it will fit your...

Drag Specialties - Clutch Lever Bracket fits '82-'95 Big Twin & '82-'85 Sportster Models (OEM #38608-82B) Features: Made of die-cast aluminum Fitment 1995 Harley-Davidson Dyna Convertible...

Barnett - Scorpion Series Clear Derby Cover fits '99-'06 Twin Cam Models Barnett's Scorpion Series Clear Derby Covers feature a scratch- and discoloration-resistant window which is tightly secured and sealed with an O-ring gasket. There's also an outer...

Drag Specialties - Complete Three- and Five- Stud Clutch Hubs fits '36-'E84 Big Twin Models These Stud Clutch Hubs are available with three or five studs; both options come complete with all of the necessary hardware for a quick, hassle-free...

Drag Specialties - Inner Clutch Hub fits 'L84-'89 Big Twin Models Replacement OEM# 37550-84A Features Improved inner clutch hub with reinforced insert Accepts all OEM components Fitment 1989 Harley-Davidson Electra Glide Ultra...

Drag Specialties - Wet or Dry Friction Plate Set fits '68-'E84 Shovelhead Model Replaces OEM#37930-68 Features Runs wet or dry; meets or exceeds all OEM specs Contains (5) friction plates and (1) hub liner with...

V-Twin - Chrome Inspection Cover fits '82-'84 FXR Model (OEM #60642-82) Chrome 5-speed inspection cover with shifter hole. Cover includes bushing. The mount screws and gasket must be ordered separately Fitment: FXR 1982-1984 Early 1984 Tech...

Drag Specialties - Primary Chain Inspection Cover fits '85-'06 Touring, '85-'94 & '99-'00 FXR Models W/ Forward Controls (Repl. OEM # 60670-85A) Drag's Primary Chain Inspection Cover is designed to be used with forward controls...

Torqdrive® Clutch Kit fits '90-'97 Big Twin Models Torqdrive delivers more discs in less space so this kit includes six friction disks that offer up to 50% stronger clutch engagement with no increase in lever effort. They provide more friction and...

James Gasket - 5th Gear Clutch Side Mainshaft Seal fits '80-'E84 Big Twin 5-Speed Models (OEM #12044, 12044A) Features: Made in the U.S.A. Fitment 1984 Harley-Davidson Low Glide FXRS - Notes: 1984Fits to Early '84...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Primary Cover Gasket fits '99-'06 FLT Model (OEM #34901-94) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Transmission Gasket Kit fits '80-'99 Big Twin Models 5-Speed w/o Integral Oil Tank (OEM #33031-85) Features: Made in the U.S.A. Fitment 2000 Harley-Davidson FXR 4 - - 1999 Harley-Davidson Softail Night Train...

James Gasket - Transmission Seal Kit fits '94-'98 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1998 Harley-Davidson Road Glide FLTR - - 1998 Harley-Davidson Road...

James Gasket - Transmission Seal Kit fits '84-'93 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Made in the U.S.A. Fitment 1993 Harley-Davidson Wide Glide FXDWG - - 1993 Harley-Davidson Low...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without using a press or tapping it in with a transmission...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can...

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...