FXR Clutch, Driveline & Trans

James Gasket - Transmission Seal Kit fits '94-'98 Big Twin Models Features: Designed for most 4- or 5-speed Big Twin transmissions Mad

James Gaskets - JGI-37741-82-K - 4-Speed Transmission Seal Kit - Fits '82-'84 FL/​FLH Models (Double-Lip Main Seal) Fits: '82-'84 FL/​FLH Models (Double-Lip Main Seal). Full year/model list is on the...

James Gaskets - JGI-34901-94-K - Primary Gasket Kit - Fits '98-'04 FLT/​FLHT/​FLHR/​FXR Models w/ Silicone Bead Fits: '98-'04 FLT/​FLHT/​FLHR/​FXR Models w/ Silicone Bead. Full year/model list is on...

James Gaskets - JGI-34901-79-K - Primary Gasket Kit - Fits '80-'83 FLT & FXR Models (Gaskets and O-Rings) (.062” Outer Cover Gasket) Fits: '80-'83 FLT & FXR Models (Gaskets and O-Rings) (.062” Outer...

Jims - 768 5-Speed Transmission Case Shifter Shaft Seal Installer fits '80-'99 Big Twin, '99 Twin Cam, '99-'06 FXST & '99-'05 FLT/F LHT/​FXD Models Features:

Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042)

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of...

WD Bearing - Transmission Cover Bearing fits '91-'99 FXD, '82-'94 FXR, '86-'99 FLST/FXST Models (OEM #8998) Quality bearing for a 5-speed transmission cover is a high quality hardened steel bearing...

Colony - 8906-5 Transmission Shifter Cover Screw Allen fits '82-'86 FXR, '80-'86 FLT Models Transmission shifter cover screw, allen style Fitment: FXR 1982-1986 FLT 1980-1986

Colony - Acorn Front Belt Drive Pulley Nut fits '99-'06 Twin Cam Models Features: Chrome front pulley nut for open primary belt drive applications Made in the U.S.A. <

Drag Specialties - 1-1/2" Rear Drive Belt 136 Tooth fits '85-'96  Touring, '85-'94 FXR Models (OEM #40001-85) Features: Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to...

Barnett - Scorpion Pressure Plate fits '00-'06 Softail & '99-'06 Touring Models Using Hydraulic Clutch System (Repl. OEM #S 45380-02, 45992-03) This pressure plate has a strong billet aluminum...

DP - High-Performance Friction Clutch Plates fits '68-E'84 Big Twin Models (Repl. OEM #37930-68) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for...

DP - Heavy-Duty Extra Plate Clutch Kit fits '90-'97 Evo Big Twin & '91-'22 Sportster Models Each of DP's Heavy-Duty Extra Plate Clutch Kit comes with nine friction plates and eight steel drive...

DP - High-Performance Friction Clutch Plates fits '90-'97 Evo Big Twin & '91-'22 Sportster Models (Repl. OEM #s 37911-90 & 37910-90) The DP High-Performance Friction Clutch Kit Plates have DP's...

DP - High-Performance Steel Clutch Plates fits L'84-'97 Big Twin & '91-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S, '22 Nightster/RH975 Models) (Repl. OEM #s 37975-90, 379795-84A &...

Pro-One - Millennium Derby Cover fits '99-'18 Big Twin Models (Exc. '18 FLSB & '15 FLHTCUL/​FLHTKL Models) These billet aluminum covers are available in smooth & black or chrome & bar-milled. NOTE:...

Baker - DD6-Speed Gear Set fits '99-'00 Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a fixed...

Baker - DD6-Speed Gear Set fits '90-'97 FXR & Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a...

Baker - DD6-Speed Gear Set fits '90-'97 Touring & FXR Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a...

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment

Mueller Motorcycle AG - Power Clutch fits '99-'23 Big Twin Models w/ Mechanical Clutch Features: The original Müller Power Clutch Replaces OEM inner and outer ramp assemblies

Drag Specialties - Inner Clutch Hub fits '90-'97 Big Twin Models Replacement OEM# 37550-90A Features Improved inner clutch hub with reinforced insert Accepts all OEM components

Drag Specialties - Diaphragm Clutch Spring Fits '90-'97 Big Twin Models Replaces OEM#37871-90 Features Standard-duty replacement spring Made in the U.S.A. Fitment

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much...

Drag Specialties - Clutch Shell fits '94-'97 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces...

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth...

Drag Specialties Clutch Shell fits '84-'89 Harley Big Twins OEM #37707-84 Replacement clutch shell with starter gear. Fitment notes:Does not include center bearing and snap rings. Fitment

Drag Specialties - Wet or Dry Friction Plate Set fits '68-'E84 Shovelhead Model Replaces OEM#37930-68 Features Runs wet or dry; meets or exceeds all OEM specs Contains (5) friction plates and...

Jims - 739 5 & 6-Speed Cruise Drive Countershaft Bearing Remover/Installer Tool Features: Install or remove the closed-end countershaft bearing on all 5-speed or 6-speed transmissions without...

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case