Hardware

V-Twin - 2692-5 - Side Car Tie Bar HardwareDescriptionAssembly features a parkerized finish. Fits:UL 1937-1948EL 1936-1940FL 1941-1984Additional Information

V-Twin - 2691-2T - Side Car Ball Joint SetDescriptionLower front mount tie rod ball joint nut and lock kit includes nut and lock nut. Fits:UL 1938-1947EL 1936-1940FL 1941-1984Additional Information

V-Twin - 2691-2 - Side Car Ball Joint SetDescriptionLower front mount tie rod ball joint nut and lock kit includes nut and lock nut. Fits:UL 1938-1947EL 1936-1940FL 1941-1984Additional Information

V-Twin - 2690-1 - Lower Front Mount Tie Rod Ball JointDescriptionLower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step...

V-Twin - 2661-7 - Side Car Step Mount KitDescriptionStep mount kit Fits:EL 1936-1940FL 1948-1964Additional Information O

V-Twin - 2622-5 - Side Car Axle Extension Nut KitDescriptionNut kit is extra long parkerized nut and washers. Fits:UL 1938-1947FL 1941-1967EL 1936-1940VL 1930-1936Additional Information

V-Twin - 2621-5 - Side Car Axle Extension Nut KitDescriptionNut kit is standard length parkerized nuts and washers. Fits:UL 1938-1947FL 1941-1967EL 1936-1940VL 1930-1936Additional Information

V-Twin - 2620-7 - Side Car Top Clamp HardwareDescriptionSide Car Top Clamp Hardware is for upper front frame clamps to used on 1937-1979 Sidecars installation.Sold as a 7 piece kit. Fits:FL...

V-Twin - 2616-4 - Side Car Step Bolt KitDescriptionIncludes parkerized bolt, spacer, nut and washer. Fits:UL 1941-1948FL 1941-1964Additional Information

V-Twin - 2433-18 - Support Rod Stud Repair KitDescriptionSupport rod stud repair kit for side cars Fits:EL 1937-1952UL 1937-1948FL 1941-1984Additional Information

V-Twin - 15-0917 - Solenoid Mount GasketDescriptionJames solenoid mount gasket Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional Information<

V-Twin - 15-0181 - Solenoid Mount GasketsDescriptionGary Bang solenoid mount gaskets Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional...

V-Twin - 13-0119 - Starter Solenoid Plunger Return SpringDescriptionReturn spring for the starter solenoid plunger. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT...

V-Twin - 13-0118 - Starter Solenoid Over-Run SpringDescriptionOver-run spring for the starter solenoid. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 12-1178 - Solenoid Roll PinDescriptionZinc plated solenoid roll pin is 1/8" x 3/4". Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST 1986-1988Additional...

Replica 1936 style raw steel frame side car mount set is for attachment by brazing.This mount set can also be used on custom frames by welding. Fits:EL 1936-1936Additional Information

Wishbone side car mount set is for rigid frames and features the new forge tooling for accurate replication including the forging number detail. Set is for use with wish bone frames only. Fits:FL...

Drag Specialties - DS110212 - Cargo Net - 12" x 17" - 6 Hook - BlackFeaturesBlack 2.5" x 2.5" elastic meshSpecsEn

Drag Specialties - DS110211 - Cargo Net - 15" x 15" - 6 Hook - BlackFeaturesBlack 2.5" x 2.5" elastic meshSpecsWi

Drag Specialties - 39200183 - Soft-Tie Extension - 1.5" x 18"FeaturesPerfect for bars or secure areas too thick for hooksWon't scratch paint or chromeMade in the U.S.A.Specs

Drag Specialties - 39200182 - Soft-Tie Extension - 1" x 18"FeaturesPerfect for bars or secure areas too thick for hooksWon't scratch paint or chromeMade in the U.S.A.Specs

Drag Specialties - 39200181 - Ratchet Tie-Downs - 1-1/2" x 6' - BlackFeatures6,000-lb. test nylon webbingIncludes vinyl-coated safety hooks at both ends that will not come unhooked1,500-lb. assembly...

Drag Specialties - 35500166 - Cargo Net - 15" x 15" - 6 HookFeaturesBlack 2.5" x 2.5" elastic meshSpecsColor/Fini

Drag Specialties - 21100592 - Rubber Plunger Boot - SolenoidFeaturesMolded black rubber boot for starter solenoid plungerReplacement Part for OEM Number(s):3144465A,3147577Specs

Steadymate - 660001-2PK - E-Track Series Strap - 2"Features6" Tie Off designed to work with an E mount kit or the E trackSimply snap the attachment into the securement pointSpecs

Steadymate - 15532 - Tie-Down - 1" x 6'FeaturesEconopack designed to give you four utility tie-downs in one packageLight-duty 1" x 6' cam tensioning straps come complete with vinyl-coated...

Steadymate - 15508 - Kwik StrapFeaturesPremium soft loops made with round sling material add a little give over rough terrainAs a sling, Kwik Straps ensure that tugging and pulling do not damage your...

Steadymate - 15427 - Handle StrapsFeaturesDesigned to fit over the handlebars and secure to Cinchtite 1, Cinchtite 2 or other tie-downs without built-in soft loopsDiameter of the handlebars must be...

Steadymate - 15470 - Cinchtite 6 Ratchet Tie-DownFeaturesPositive-lock military snap hook to prevent release over rough terrainEasy-to-use quick-tightening ratchet buckle and one-hand release...

Steadymate - 15469 - Cinchtite 5 Ratchet Tie-DownFeaturesPositive-lock military snap hook to prevent release over rough terrainEasy-to-use quick-tightening ratchet buckle and one-hand release...

Steadymate - 15465 - Cinchtite 2 Ratchet Tie-DownFeaturesZinc-plated, corrosion-resistant S-hooksOne vinyl-coated, scratch-resistant S-hookEasy-to-use quick-tightening ratchet buckle and one-hand...

Steadymate - 15464 - Cinchtite Cam Tie-DownFeaturesZinc-plated, corrosion-resistant S-hooksOne vinyl-coated, scratch-resistant S-hookAircraft cam buckle allows fast and efficient locking with...

Sp Connect - 53232 - Phone Mount - Pro - Handlebar Clamp - BlackFeaturesEasy to mount on the handlebar clampFlexible alignment thanks to swivelling and rotating headCNC-machined from aircraft grade...

Sp Connect - 53238 - Phone Mount - Pro - Handlebar Clamp - ChromeFeaturesEasy to mount on the handlebar clampFlexible alignment thanks to swivelling and rotating headCNC-machined from aircraft grade...

Sp Connect - 53233 - Phone Mount - Pro - Mirror - BlackFeaturesMobile phone mounting on the mirror of mopeds or motorbikesPartly made of CNC-milled aluminumSwivelling and rotatableAlso for navi...

Sp Connect - 53230 - Phone Mount - Pro - Clutch - BlackFeaturesOptimal solution for hard-to-reach handlebarsPivoting and rotating headCNC-made from aircraft-grade aluminumMobile phone can be fixed in...

Sp Connect - 53214 - Phone Mount - Stem - BlackFeaturesMount for supersport motorbikes (stub handlebars)CNC machined from aircraft grade aluminumVibration dampingNavigation and apps directly in the...

Sp Connect - 53136 - Phone Mount - Mirror - BlackFeaturesMirror mount for mobile phoneFor Vespa, scooters, mopeds and motorbikesSuper-stable 360  adjustment in 6  stepsMobile phone can be fixed in...

Sp Connect - 53129 - Phone Mount - Pro - ChromeFeaturesCNC-machined from aircraft grade aluminiumHigh-quality finishMobile phone can be fixed in portrait or landscape formatSuper-stable 360 ...

Ridepower - RPINDTVMOUNTQD - Phone Charging Mount - Quick Disconnect - Ball MountFeaturesThe mount is designed rugged for powered sports vehicles and made of durable ABS plastic, with an on/off...