Harley Davidson

V-Twin - 23-0989 - Chrome Front 4 Piston Caliper and 11-1/2 inch Disc KitDescriptionKit includes a chrome 4 piston caliper with bracket and pads , a polished stainless steel drilled 11-1/2" disc, and...

Brake spring stud features a chrome finish.Stud features a 5/16 x 18 thread. Fits:FL 1970-1984Additional Information UOM1 - EA

Chrome caliper kit includes chrome caliper, chrome anchor and chrome caliper strap.For right side applications. Component kit requires use of original mount hardware. Mount bolts not included. OEM...

Billet chrome brake pedal with milled slots. Stock length.Constructed from a one piece forged aluminum blank. Fits:FLT 2008-2013Additional Information OEM N

V-Twin - 23-0932 - Brake Pad Hardware KitDescriptionHardware kit includes 4 shims, 4 studs, 4 nuts, and 4 clips.*NOTE: Pre drilled pads not included. Fits:FLTTG 2009-UP Tri-GlideFLHTCUTG...

Rear brake drum assembly features a black finish with a chrome axle kit. Includes drum, axle, spacer, rear hydraulic hose, and backing plate with shoes and wheel cylinder.Wheel not included. Will...

V-Twin - 23-0922 - V-Rod Mid Control Strap SetDescriptionV-Rod mid control right and left strap set fits .936" outer diameter gears. Fits:VRSC 2003-UPAdditional Information

Chrome flat brake rod is 12" long with a hole at the one end and threaded at the other.Thread is 5/16-24. Fits:FXD 1991-2017Additional Information OEM No.

Master cylinder constructed of cast iron and features a natural aluminum finish with an alloy top for Wagner and V-Twin master cylinders.Includes baffle plate as original! ...

Chrome girling rear caliper bracket is for 11-1/2" disc. Fits:FX 1983-1985 with 11-1/2" discFXST 1984-1986Additional Information UOM1 - EA<

V-Twin - 23-0891 - Brake Line 3.5 inch Stainless SteelDescriptionStainless steel 3.5" brake line with two 10mm banjo bolts. Fits:FXST 2007-UPAdditional Information

Black brake caliper mount bracket for use with 10" disc. Fits:FL 1973-1980FX 1973-1980Additional Information UOM1 - EA

V-Twin - 23-0830 - Chrome Billet Brake PedalDescriptionBillet chrome brake pedal.Constructed from a one piece forged aluminum blank. Fits:FLHXXX 2014-UPFLT 2014-UPAdditional Information

Rear brake shoe kit includes shoes with linings installed, springs, cam, and pivot stud kit. Fits:XL 1973-1978 RearAdditional Information UOM1 - KIT

Rear brake shoe kit includes standard size shoes with linings installed, springs, cam, and pivot stud kit. Fits:XL 1952-1972 RearAdditional Information UOM

Natural rear 5/8" bore master cylinder includes black cover and boot with piston.Remote master cylinder is designed to mount in a variety of locations where standard assemblies cannot. ...

Polished rear 5/8" bore master cylinder includes cover and boot with piston.Remote master cylinder is designed to mount in a variety of locations where standard assemblies cannot. ...

V-Twin - 23-0809 - Brake Pedal Pivot/Clevis ChromeDescriptionChrome brake pedal pivot/clevis for mounting the brake pedal to the mount bracket. Fits:XL 2004-UPAdditional Information

V-Twin - 23-0807 - Piston Rebuild Kit for Rear Brake CaliperDescriptionPiston rebuild kit for rear brake caliper, includes the clevis. Fits:FLST 2018-UPFXST 2018-UPAdditional Information

Chrome line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information UOM1 - EA

Zinc steel front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1979-1984Additional...

Rear brake master cylinder features a black finish. Fits:FXBB 2021-2021Additional Information OEM No.41700460

Rear brake master cylinder features a chrome finish. Fits:FXBB 2021-2021Additional Information OEM No.41700460

Black rear remote 5/8" bore master cylinder includes cover and boot with piston.Remote master cylinder is designed to mount in a variety of locations where standard assemblies cannot. ...

Polished bracket is for use on 11-1/2" discs.Bracket accepts 1981-1982 stock caliper. Fits:FL 1973-1980FX 1973-1980Additional Information UOM<

Caliper includes a black caliper and chrome bracket with all internal parts. Fits:FL 1973-1980FX 1973-1980Additional Information UOM1 - KIT

Chrome billet left side rear caliper bracket is for use with a 1" axle and 11-1/2" rotor.Includes a spacer for 3/4" axle application. Bracket mount holes measure 3-1/2" center to center. Fits:FLST...

V-Twin - 23-0780 - Footpeg Support Driver Right SideDescriptionDriver footpeg chrome support bar for the right side brake pedal mount. Fits:XL 2004-UPAdditional Information

Rear remote mount master cylinder are designed to mount in a variety of locations where standard assemblies cannot. Fits:FLT 1995-1996Additional Information UOM

Chrome cover for the rear master cylinder reservoir.Includes gasket. Screws sold separately. Fits:FXST 2000-2005FLT 1999-2004FLST 2000-2005Additional Information

Rear section of the brake line fits from the junction toward the rear caliperOrder rubber hose for final connection to the rear wheel cylinder or caliper separately. ...

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. ...

Zinc steel front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1970-1978Additional...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...

Black cap for filler plug. Fits:FL 1958-1978FX 1971-1978Additional Information OEM No.41765-58 UOM

Zinc steel line runs from the master cylinder to the brake tee. Fits:XL 1981-1985Additional Information OEM No.42484-81

Brass swivel fitting attaches the brake hose to the back of the wheel cylinder backing plate. Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.

Matte chrome steel front section of rear brake line fits between the master cylinder and junction.NOTE: On 1936-1957 Big Twins, the brake arm faces rearward and in ...

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order the rubber hose for final connection to rear wheel cylinder to caliper separately. ...

Chrome steel front section of rear brake line fits between the master cylinder and junction.The end to end following the curve measures 22". *NOTE: Brake line will have oxidation under the nuts due...