Harley Davidson

Lifter base hex head screw set without taper. Screws measure 1-4-24 x 7/8.Choose the correct thread type for your application. This set is for use on late model lifter blocks without tapered holes...

1/4"-24 lifter base hex screw featuring a chrome finish with stock lifter blocks. Tapered head screw for early type lifter blocks. Fits:FL 1941-1975EL 1936-1952Additional Information

Transmission engine hex drain plug 1/2" X 13 thread, zinc. Fits:XL 1957-1976 Engine and TransmissionFL 1941-1984 TransmissionFX 1971-1984 TransmissionAdditional Information

The magnetic drain plug prevents metal particles from circulating through the transmission. And the drain plug washer is constructed of brass.*NOTE: Plug is 1/2"-13 UNC. Fits:FL 1941-1985Additional...

V-Twin - 8233-1T - Chrome Flat Top Fork Tube BoltDescriptionFork tube bolt with flat top and chrome finish. Fits:FXD 1991-2005FXST 1984-UPFLST 1986-UPFL 1977-1984Additional Information

When restoring your Big Twin, don't overlook your rocker boxes. Replace the old rocker caps with our V-Twin chrome rocker shaft end nuts. These end nuts have a allen style head and are for 1971-1984...

Four piece solid tappet adapter kit replaces hydraulic tappet inserts. Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1953-1984Additional Information

Front axle nut kit include sleeve nut, castle nuts and cotter pins. Fits:UL 1937-1948FL 1941-1971EL 1936-1940G 1930-1971Additional Information

Zinc rear nut and lock kit for 1930-1972 Big Twin. Kit includes sleeve nut, collar, axle nut, and lock clip. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940VL 1930-1936Additional Information

Rear axle nut and lock kit, chrome fits 1930-1972 Big Twin Kit includes sleeve nut, collar, axle nut and lock clip. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940VL 1930-1936Additional...

Zinc slot type transmission top cover screw kit contains stock fasteners and special vent screw. Fits:UL 1937-1948FL 1941-1978FX 1971-1978EL 1936-1940Additional Information

Motor case drain/oil pump body plug has a zinc finish. Fits: UL 1937-1948 Case F 1911-1920 Case J 1921-1929 Case FL 1968-1984 Oil pump FX 1971-1984 Oil pump EL 1936-1940 Case VL 1930-1936...

Chrome hex stock type kit includes nuts and washers for the transmission side cover and clutch arm. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Zinc plated cylinder base nut stock set includes 8 nuts with washers. Fits:FX 1971-1977EL 1936-1940FL 1941-1977Additional Information UOM

Zinc plated cylinder base nut stock set includes 8 nuts with washers. Fits:FX 1971-1977EL 1936-1940FL 1941-1977Additional Information UOM

Stock headbolt kit with washers features a zinc finish. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT

Rear chain adjuster features a parkerized finish.Chain adjuster features a 3/8 - 24 thread with a hex head. Fits:FL 1941-1972UL 1937-1948EL 1936-1940Additional Information

Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fits:FX 1971-1984XL 1978-1987Additional Information UOM1 - EA

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

V-Twin - 7506-4 - Solid Shovelhead Pushrod SetDescriptionSolid shovelhead pushrod set is alloy construction with hardened steel ends tips.For use with solid tappets with build in adjusters and lock...

Retainer and seal kit for the sprocket shaft Fits:FL 1955-1968Additional Information UOM1 - EA Manufacturer

Chrome front motor mount acorn style bolts are extra long at 7.5". Fits:XL 1957-1983Additional Information UOM1 - KIT

Oil pump mount set features allen style screws.Includes (4) 1/4"-20 x 2-1/2" and (2) 1/4"-20 x 2-3/4" screws. *NOTE: When mounting oil pump mount set to V-Twin engine cases, it does not require a...

V-Twin - 73-0037 - Hex Head Screw Full ThreadDescriptionHex head screw is full thread with 5/16-24 x 1-1/2".Sold as a pack of 5. Fits:XL 1977-1978All modelsAdditional Information

Brake control mount kit. Fits:FL 1970-1984FLH 1979-1984Additional Information UOM1 - KIT Manufacturer

V-Twin - 73-0034 - 10-24 X 1/2 inch Self Tapping Phillips Screw ZincDescription10-24 X 1/2" self tapping Phillips screw features a zinc finish.Sold as a pack of 5. Fits:XL 1975-1976Custom...

The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR...

Chrome fender strut with three holes. Fits:FLST 1986-1999Additional Information UOM1 - SET Manufacturer

Rear engine mount cover. Fits:FXR 1987-1995FLT 1987-1995Additional Information UOM1 - EA Manufacturer

Frame and rork kit includes straight leg rigid frame, a 1" overstock inline black spring fork and an inline Spring Fork handlebar. The 1" compliments the 30  frame. Assembly accepts Shovelhead or...

Swingarm brake assembly kit is for a stock width tire.Swingarm brake assembly kit includes chrome swingarm with pivot pin and bearing kit, chrome caliper and bracket, caliper anchor arm, 10" drilled...

Frame and fork kit includes a replica retro rigid 30  rake frame and a FLSTS complete inline spring fork assembly.Must order neck cup and race separately. *NOTE: There are no serial numbers stamped...

Frame and fork kit includes a replica retro rigid 30  rake frame and a FLSTS complete inline spring fork assembly.Must order neck cup and race separately. *NOTE: There are no serial numbers stamped...

Frame and fork kit includes replica retro rigid 30  rake frame and 32" inline spring fork unit that features chrome front legs, outer springs, rockers and chrome rear leg.*NOTE: There are no serial...

Frame and fork kit inlcudes a replica retro rigid 30  rake frame and 32" inline spring fork assembly that features a black finish.Frame will accept Panhead or Shovelhead engine with 4-speed...

Spring seat suspension assembly. Fits:FLHFB 2021-2023FLH 2021-2023FLHTP 2021-2023FLHP 2021-2023Additional Information OEM No.5

V-Twin - 54-0988 - FXBB Swingarm Pivot Shaft Kit Zinc PlatedDescriptionZinc plated FXBB swingarm pivot shaft kit includes the shaft, bearings, snap rings, a spacer and nut. Fits:FXFBS 2018-UPFXBB...

V-Twin - 54-0973 - Shock Pivot Hardware KitDescriptionShock pivot hardware kit includes the screws, nut, spacer, retaining ring and bearing.*NOTE: Must order pivot shaft separately. Fits:FXBB...

Shock stem washer set includes grommets, nuts and washers.Sold as a set of six. Fits:FLST 2000-2017Additional Information OEM No.56183-00

V-Twin - 54-0761 - FXBB Rear Shock Lowering KitDescriptionFXBB rear shock lowering kit is for the single shock units on 2018-up Softail models. Kit includes shock yoke, collar, threaded insert and...