Harley Davidson

7-tooth drive gear provides the speedometer with the proper RPM featuring a smaller inner diameter than OE.. Fits:FL 1969-1980FLH 1969-1980Additional Information

4 Tooth fine speedometer drive gear featuring a smaller inner diameter than OE.For use with 2:1 ratio speedometer and drive gear. Fits:FL 1962-1968Additional Information

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

V-Twin - 36-0006 - York Clutch Cable Housing Black Description Replaces stock plastic clutch cable housing with the York black billet aluminum housing. Fits All 2018-up Softail and 2021-up Touring...

V-Twin - 36-0005 - 8 inch York Clutch Cable ExtensionDescription8" York EZ install clutch cable extension quickly and easily lengthens your clutch cable on all 2018-up Softail and 2021-up Touring...

V-Twin - 36-0004 - 6 inch York Clutch Cable ExtensionDescription6" York EZ install clutch cable extension quickly and easily lengthens your clutch cable on all 2018-up Softail and 2021-up Touring...

V-Twin - 36-0003 - 4 inch York Clutch Cable ExtensionDescription4" York EZ install clutch cable extension quickly and easily lengthens your clutch cable on all 2018-up Softail and 2021-up Touring...

Speedometer cable and turn signal clip is cadmium plated. Clips fits 1954-1965 speedometer cables, 1973-1977 turn signals and 1970-1971 KH, XL. XLH, XLCH seats. Fits:XL 1970-1971XLH 1970-1971KH...

V-Twin - 35-9871 - Handlebar Throttle TubeDescriptionThrottle by wire nylon handlebar throttle tube.Fits 2016-2017 FXDLS and 2016-up Softail models, 2011-2012 FLSTSE, 2013-2014 FXSBSE, 2014-2015...

V-Twin - 35-9870 - Dual Type Handlebar Throttle TubeDescriptionNylon dual type throttle tube. Fits:FXD 1996-2017FLT 1996-2007FLST 1996-2017FXST 1996-2017XL 1996-UPAdditional Information

Intake manifold for spigot mount carburetor. Fits:XL 2007-2021Additional Information OEM No.27707-07 UOM<

Dual handlebar throttle cable assembly with black cables, grips, and chrome end plugs.Cable has a casing length 36" and is 40" overall. For use with Keihin butterfly style carburetors. Fits:FXST...

Dual handlebar throttle cable assembly with black grips. The length is 33-1/2" and length with travel is 38-1/2". Fits:FLT 1991-1995FLST 1991-1995FXST 1991-1995FXD 1991-1995XL 1991-1995FXR...

OKO 45mm flatslide carburetor incluldes an enricher, idle adjustment cables, air cleaner adapter ring and choke cable, as shown. Features a natural finish.Includes air cleaner adapter plate. *NOTE:...

OKO 42mm flatslide carburetor includes the choke cable as shown, and features a natural finish.Includes enricher, idle adjustment cables, air cleaner flange mount, and air cleaner adapter plate. Uses...

Replica Keihin carburetor rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Carburetor breather manifold kit fits custom air cleaners to motors with the internal breathing system, and features a chrome finish.Kit includes chrome breather manifold,chrome banjo bolts, chrome...

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

CV carburetor float for 40mm CV carburetors. Fits:FXST 1992-2006FXR 1992-1994FLST 1992-2006XL 1992-2006FXD 1992-2006FLT 1992-2006Additional Information

Intake manifold for spigot mount carburetor. Fits:XL 2004-2006Additional Information OEM No.27024-04 UOM<

Natural alloy petcock has a 90  left outlet, nut, nylon filter, screen, washer, rubber gasket and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Natural alloy petcock has straight outlet with nut and includes nylon filter screen, washer and reserve position.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are...

Intake manifold is of cast alloy and spigot type. Fits:XL 1988-2003 EvolutionAdditional Information OEM No.27004-88A

Stroker intake manifold is flat seal type. It is a replacement for all OKO and S&S B & E 1-7/8" Super carburetors. For models with a .200 longer cylinder. Fits:FL 1978-1984FX 1978-1984Additional...

Keihin carburetor Viton rebuild kit Fits:FXR 1982-1988FX 1979-1984FLST 1984-1988FXST 1984-1988FL 1979-1984XL 1979-1988Additional Information

Keihin carburetor rebuild kitSold as an 18 piece kit. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Replica intake manifolds are of cast alloy spigot type. Fits:FXD 1991-1999FXST 1990-1999FXR 1990-1994FLST 1990-1999FLT 1990-1999Additional Information

Alloy petcock with 90  right outlet and reserve position includes nut.For use with stock gas tanks or custom tanks with a 22mm outside thread. Designs are made for a seated position on the motorcycle...

Intake manifold coupler clamp set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

CV carburetor main jet assortment for the Kinetic-Karb tuner kit includes 5 of each jet from 1.40-2.05 in increments of .05.Jets are for use in stock CV carburetors or in combination with the...

Kinetic-Karb CV carburetor tuner kit is for Keihin constant velocity carburetors to permit easy tuning after installation of custom air cleaners, cams, and exhaust for cabureted models.Carburetor...

Nylon throttle tube for single cable throttle. Fits:FL 1974-1980FX 1974-1980XL 1974-1980Additional Information OEM No.56220-74

Keihin carburetor diaphragm pump. Fits:FXR 1982-1988FX 1979-1984FXST 1984-1988FL 1979-1984FLST 1986-1988XL 1979-1988Additional Information

Intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system. Manifold will accept S&S CV or other aftermarket carburetor.Manifold is for use with 883cc...

Chrome intake manifold flange set. Fits:FLT 1986-1999FXD 1991-1999FLST 1986-1999XL 1988-2006FXR 1986-1994FXST 1986-1999Additional Information

Fuel filter shell accepts stock type fuel filter and regulator. Fits:FLTRU 2012-2022FLHXSE 2012-2022FLHT 2012-2022FLHR 2012-2022FLHX 2012-2022FLHTCUTG 2012-2022FLHTK 2012-2022FLRT 2015-2022Additional...

V-Twin - 35-6112 - Replacement Fuel FilterDescriptionReplacement fuel filter kit is OEM style and fits Big Twin models. Fits:FXLR 2018-UPFLSL 2018-UPFLHC 2018-UPFLDE 2018-UPFLSB 2018-UPFLFB...

Replacement fuel filter kit is OEM style and fits Evolution Touring models. Fits:FLT 1995-2001FLHR 1995-2001FLHT 1995-2001Additional Information

Replacement fuel line which fits from the pump to the filter on models with fuel injection. Fits:FXST 2001-2007FLHT 2000-2007FLST 2001-2007FLHR 2000-2007Additional Information