Low Rider FXS

V-Twin - 37-8453 - Handlebar Riser BoltDescriptionHandlebar riser bolt is 3-3/4" long with a 1/2-13 thread. Fits:XL 1974-UPFX 1974-1982Additional Information

Chrome sprocket bolt set includes thread size 7/16"-20 X 1-1/4 Fits:FLST 1986-1998 spoke wheelFXST 1984-1998 spoke wheelXL 1979-1990 spoke wheelFL 1973-1984 spoke wheelFX 1973-1984 spoke...

V-Twin - 37-7966 - Handlebar Clamp Screw Cover CapDescriptionChrome handlebar clamp screw cap snap over allen head screws to cover hole. Fits:FXST 1984-UPFXR 1982-1994FX 1973-1984XL 1974-UPAdditional...

Allen bolt exhaust stud kit includes two allen bolts, gasket s and allen wrench Fits:FX 1971-1984FL 1966-1984Additional Information UOM1 - KIT

V-Twin - 37-6370 - Front Fender Stainless Steel RivetDescriptionReplacement stainless steel solid rivet is for use on the front fender bracket. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

Head screw, 10/24 X 3/8 Fits: FX 1971-1984 FL 1941-1984 Additional Information UOM 10 - PK Manu

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

V-Twin - 37-1957 - Clutch Ball End Adjuster Screw KitDescriptionClutch ball end ajuster screw kit Fits:FX 1971-1984FL 1941-1984Additional Information

V-Twin - 37-1955 - Clutch Adjuster Screw KitDescriptionClutch adjuster screw kit Fits:FX 1971-1984UL 1941-1948FL 1941-1984Additional Information

Triple tree stem nut washer. Fits:FXR 1982-1986FX 1971-1984XL 1971-1986Additional Information UOM1 - EA

7/16" brake rotor bolt set features carriage bolt head with square position under head, to press into 7/16"holes on rotor side of hub.Includes (5) 7/16"-14 x 1 bolts and (5) nyloc nuts. *NOTE: Fit...

Chain guard mount kit has a zinc finish. Fits:FX 1973-1984Additional Information UOM1 - KIT FinishChr

Cast dash panel mount studs only. Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information

Chrome bolt kit includes allen bolts for rear caliper. Fits:FXR 1982-1986FXST 1984-1986FX 1982-1984FLST 1986-1986XL 1982-1986FX 1982-1986Additional Information

Acorn type triple tree stem nut with shoulder, 1" - 24 thread. Fits:FXST 1984-1999FLST 1986-1999FL 1948-1984FLH 1948-1984FX 1980-1986Additional Information

Magnetic oil tank drain plug and timing hole plug prevents metal particles from circulating through engine, and oil tank. Plug is 5/8" - 18 UNF. Fits:FL 1965-1984FX 1971-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through engine, and oil tanks. Plug is 3/8" - 24 UNF. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through the transmission. Plug is 1/2" - 13 UNC. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS...

Black V-Twin throttle and idle cable set with 45  Elbow fitting.Both cables have a 49-3/4" casing. Fits:FXR 1985-1989FXST 1984-1989XL 1981-1989FXR 1982-1984FLST 1986-1989FL 1981-1984FX...

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This 64.56" long cable is 12" over stock. Fits:FL 1970-1984FXEF 1984-1985FXS 1977-1982FXST...

Right side speedometer drive is for 2:1 ratio and the front wheel only. Speedometer drive has a .750 axle hole and a spacer. The spacer width is .268 and has an overall length of .789. Features a...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive...

Stainless steel braided clutch cable has a casing length of 60.56". Cable is 8" over stock length.Features a heavy duty construction designed for reliability and longer service. Fits:FX 1971-1984FL...

Carburetor choke wire. Fits:FXS 1973-1984XL 1979-1980 early 1980FX 1973-1984Additional Information OEM No.29216-73

Cable ferrule set for the carburetor lever connection cable end.Sold as a set of 10. Fits:FLT 1982-1984FLT 1979-1984FL 1974-1984FX 1974-1984FXR 1982-1984XL 1974-1984Additional Information

One piece billet twist grip tube is for single or dual cable applications. Machined from aluminum bar stock. Fits:FL 1975-1996FX 1973-1996Additional Information

V-Twin clear coated stainless steel throttle cable has a 36.375" casing length with an overall length of 40". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX...

V-twin stainless Steel idle cable has a 35.875" casing length and an overall length of 40". Fits:FXST 1984-1989XL 1981-1985FLH 1981-1984FXR 1982-1989FLST 1986-1989FX 1981-1984Additional Information

V-Twin - 36-0882 - Black Throttle Cable with 90  Elbow FittingDescriptionBlack throttle cable has a 90  elbow fitting. This cable has a casing length of 41" which is 8" over stock.Throttle with 90 ...

Stainless steel braided with a clear coat throttle and idle cable set with 45  elbow fitting. These cables have a casing length of 45.83" and is 8" over stock. Fits:FXST 1984-1989FLST 1986-1989FL...

Black throttle and idle cable set with 45  elbow fitting. These cables have a casing length of 44.81" and is 8" over stock. Fits:FXST 1984-1989XL 1981-1989FLH 1981-1984FLST 1986-1989FX...

Black throttle and idle cable set with 45  elbow fitting. These cables have a casing length of 36.81".Both cables are screw in, both casing measures 37-3/8", and the travel is 41-3/8" and 41-1/4" for...

Stainless steel braided with a clear coat throttle and idle cable set has 45  elbow fitting. The casing length of the throttle and idle cable is 38". Fits:FXST 1984-1989XL 1981-1989FLST 1986-1989FL...

Barnett clear coated stainless steel throttle set includes the stock length throttle and idle cables. Throttle has a 38" casing length and Idle has a 36.75" casing length.For use on models listed...

Right side speedometer drive is for a speedometer with a 2:1 ratio and is for front wheel drive and works great when converting from an electronic speedometer.Speedometer drive unit has a .750 axle...