Shovelhead Parts

Paughco - 730C Exhaust Header Set Upsweep for Shovelhead Motors Chrome Paughco upsweep drag header set will accept straight fishtail extensions or mufflers. Upgrade your motorcycle's performance with the Paughco 730C Exhaust Header Set Upsweep,...

Prism Supply Co. - Natural Stainless Steel Footpeg Support Bar Set fits Shovelhead/ Evo Motors w/ Cone Open Primary This Footpeg Support Bar Set is designed for frames featuring an installed "cone" type motor. It accepts female chopper footpegs that fit...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

S&S Cycle - 3⅝" Big Bore Cylinder & Big Bore Piston Kit fits '66-'84 Shovelhead Engines This kit can be used to construct an 88" engine, or to replace the cylinders and piston in an engine with an existing S&S® stock bore stroker kit...

S&S Cycle - 930-0052 - Time Saver Pushrods - Big Twin | ShovelheadFeaturesPushrods adjust from 9.500" to 11.500"9 mm diameter provides superior strength and durabilityRemoval of rocker boxes is not requiredAdjusting end is .354\Made in the U.S.A.Not for...

S&S Cycle - Retro Top-End Conversion Kit for 3.625" Bore Cylinders fits '66-'84 Shovelhead Engines Your Shovelhead will achieve the ultimate blast-from-the-past appearance of a Panhead with this Retro Top-End Conversion Kit from S&S Cycle! It...

S&S Cycle - Retro Top-End Conversion Kit for Stock Bore Cylinders fits '66-'84 Shovelhead Engines Your Shovelhead will achieve the ultimate blast-from-the-past appearance of a Panhead with this Retro Top-End Conversion Kit from S&S Cycle! It...

Thunderheader - Black Exhaust w/ Heat Shields - fits '70-'83 Shovelhead without Floorboards (Does not fit Kickstart) This Thunderheader black exhaust system is built for riders who want real performance and a clean, aggressive look on their Shovelhead...

Thunderheader - Chrome Exhaust w/ Heatshields - fits '70-'83 Shovelhead without Floorboards (Does not fit Kickstart) This Thunderheader chrome exhaust system is built for Shovelhead riders who want proven performance with a classic finish. Designed to...

V-Twin - 10-0003 - S&S Stock Bore Shovelhead Engine Crankcase SetDescriptionCrankcase set comes ready to assemble.S&S Crankcase Sets are shipped set-up with Timken left side bearing and race assembly, seal and seal spacer, oil pump drive bushing, needle...

V-Twin - 10-0006 - Shovelhead 80 inch Short BlockDescriptionV-Twin short block is shipped fully assembled and a Manufacturer Statement of Origin is supplied.Unit features an S&S crankcase, oil pump and breather assembly, stock stroke flywheels, Timken...

V-Twin - 10-0316 - Flatside Shovelhead Cam Case KitDescriptionFlatside Shovelhead cam case kit includes a cast finish cam cover and all internal parts for assembly.Accept Overhead oiler configuration. Cover is drilled for oil feed lines screw. Cam cover...

V-Twin - 10-0660 - Cam Chest Assembly Kit ShovelheadDescriptionV-Twin Motor Shop cam chest assembly kit includes internal Big Twin replacement type parts for years listed, including a Sifton cam.For use on Shovelhead models. Order cam bearings and...

V-Twin - 10-0676 - Cam Chest Assembly Kit Panhead-ShovelheadDescriptionV-Twin Motor Shop cam chest assembly kit includes internal Big Twin replacement type parts for years listed, including a Sifton cam.Assembly is for use on a cam that rides on bronze...

V-Twin - 10-0978 - Shovelhead Cam Chest Assembly KitDescriptionShovelhead cam chest kit includes a smooth finish cast cam cover and all internal parts for assembly.*NOTE: Check the pinion and cam gears tolerance during assembly. Required to use with OHO...

V-Twin - 10-1327 - Panhead-Shovelhead Lightning Cam Chest KitDescriptionLightning cam chest kit for 1958-1969 models.*NOTE: Includes lightning style cam and gears. Late OEM Panhead and Shovelhead Cases use a left hand threaded circuit breaker stud,...

V-Twin - 10-1345 - Panhead Top End Kit for Shovelhead MotorsDescriptionPanhead top end kit with 3-1/2" cylinders and matching complete Panhead heads. This kit will fit 1970-1984 Shovelheads to convert to Panhead type, with overhead oiler system.Kit...

V-Twin - 10-1372 - Flatside Shovelhead Short Block 80 inchDescriptionFully assembled.Left engine case accepts cast aluminum inner primary cover and can be used with electric start. Replica short block does not include the carburetor and charging system...

V-Twin - 10-1807 - Shovelhead Short Block 74 inchDescription74" Shovelhead short block is shipped fully assembled.Engine case accepts cast inner primary cover for 1965-1969 model years. The left side sprocket shaft is the correct length for use with...

V-Twin - 10-1820 - Panhead/Shovelhead Engine Case SetDescriptionPanhead engine case set includes tapered bearing assembly for left side and case race on right side. Features a front saddle for the 3 brush generator strap.Accepts shovel head OHO line to...

V-Twin - 10-1875 - Panhead/Shovelhead Motor Case SetDescriptionPanhead/Shovelhead motor case set for flat side models with cast aluminum inner primary cover. Set includes tapered bearing assembly for left side and case race on right side. For standard...

V-Twin - 10-1888 - Shovelhead Case SetDescriptionShovelhead motor case set for flat side models with cast aluminum inner primary cover. Set includes tapered bearing assembly for left side and case race on right side.Accepts shovel head OHO line to the...

V-Twin - 10-2009 - Shovelhead 74 inch Short Block Description Assembled and tested for oil pressure.74" Short block is shipped fully assembled. Unit features Sifton oil and breather assembly, stock stroke flywheel, Timken bearings, stock cam properly...

V-Twin - 11-0007 - M8 Shovelhead Rocker Box Cover Set Natural CastDescriptionShovelhead rocker box set features a natural cast finish. For M8 models. Fits:FLST 2018-UPFLT 2017-UPFXST 2018-UPAdditional Information UOM1 - SET ManufacturerV-Twin ...

V-Twin - 11-0008 - TC-88 Shovelhead Rocker Box Cover Set Natural CastDescriptionTC-88 Shovelhead rocker box set features a natural cast finish.Retro "Shovel" look for the Twin cam motors. Shipped in natural cast aluminum, which aids in heat disepation...

V-Twin - 11-0011 - M8 Shovelhead Rocker Box Cover SetDescriptionShovelhead rocker box cover set features a natural cast finish. For M8 models.Shipped in natural cast aluminum, which aids in heat disepation, can be readily painted with high tempeture heat...

V-Twin - 11-0056 - Shovelhead Rocker Box Cover Set ChromeDescriptionChrome front and rear rocker box covers for Shovelheads.See detailed close up photos to view the chrome finish. Sold as a pair. *NOTE: Must order studs separately. ...

V-Twin - 11-0057 - Shovelhead Rocker Box Cover Set PolishedDescriptionPolished rocker box set fits 1966-1984 Shovelhead motors.*NOTE: The top of the cover is made in Japan. Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1966-1984Additional Information ...

V-Twin - 11-0063 - 80 inch Shovelhead S&S Cylinder SetDescriptionS&S cast iron cylinders for Shovelhead models are stock length and include base nuts, head bolts, and head and base gaskets.Cylinders measure 3-1/2" for 1978-1984 Shovelhead 80" models...

V-Twin - 11-0082 - Replica Shovelhead Cylinder Head SetDescriptionReplica Shovelhead cylinder head set for Big Twin models.Set is for stock lift cams only. Replica Shovelhead head sets feature rubber band type heads and are completely assembled with...

V-Twin - 11-0089 - Replica Shovelhead Cylinder Head SetDescriptionReplica Shovelhead cylinder head set is fully assembled with unleaded valve seats, cast iron valve guides, nitrated valves, valve guide seals and stock type valve spring kit. For stock...

V-Twin - 11-0091 - Replica Shovelhead Rocker Box Cover Set PolishedDescriptionRocker box set is the replica style, cast construction, with partial polished top and flat face surface. The remaining surfaces are cast.Accurately cast with the later shape...

V-Twin - 11-0185 - 80 inch Shovelhead Piston Ring Set StandardDescriptionStandard Hasting cast piston ring setSold as a pair for two pistons. Fits:FLT 1979-1983FXR 1982-1983FL 1978-1984FX 1978-1984Additional Information UOM1 - SET ManufacturerHastings...

V-Twin - 11-0186 - 80 inch Shovelhead Piston Ring Set .010 OversizeDescriptionHasting cast piston ring set is for a 3-1/2" bore and is .010 oversize. Features a compression rings with a size of 3/32" and oil rings with a size of 3/16".Sold as a pair for...

V-Twin - 11-0187 - 80 inch Shovelhead Piston Ring Set .020 OversizeDescriptionHasting cast piston ring set is for a 3-1/2" bore and is .020 oversize. Features a compression rings with a size of 3/32" and oil rings with a size of 3/16".Sold as a pair for...

V-Twin - 11-0188 - 80 inch Shovelhead Piston Ring Set .030 OversizeDescriptionHasting cast piston ring set is for a 3-1/2" bore and is .030 oversize. Features a compression rings with a size of 3/32" and oil rings with a size of 3/16".Sold as a pair for...

V-Twin - 11-0196 - 3-5/8 inch Shovelhead Piston Ring Set StandardDescriptionHastings moly piston ring set is for a 3-5/8" bore and is standard size. Features moly top compression rings with the size of 5/64" and chrome oil rings.Can be used on 1966-1984...

V-Twin - 11-0197 - 3-5/8 inch Shovelhead Piston Ring Set .010 OversizeDescriptionHastings moly piston ring set is for a 3-5/8" bore and is .010 oversize. Features moly top compression rings with the size of 5/64" and chrome oil rings.Can be used on...

V-Twin - 11-0252 - 3-5/8 inch Shovelhead Piston Ring Set StandardDescriptionHastings moly piston ring set is for a 3-5/8" bore and is standard size. Features moly top compression rings with the size of 1/16" and chrome oil rings.For installation of...

V-Twin - 11-0254 - 3-5/8 inch Shovelhead Piston Ring Set .020 OversizeDescriptionHastings moly piston ring set is for a 3-5/8" bore and is .020 oversize. Features moly top compression rings with the size of 1/16" and chrome oil rings.Can be used on...