Softail Heritage Classic FLSTC

Lower gas tank mount bracket. Replica type for use as stock replacement. Fits:FXST 1984-1999FLST 1986-1999Additional Information OEM No.61667-84

Bracket set to mount 6" round oil tank to rigid and stock frames. ISO mounts are included.Top brackets must be fabricated for installation to use with custom frames. The other mounting holes measure...

V-Twin - 31-0216 - Chrome Turn Signal Kit ShortDescriptionShortie signal mount set chrome.Hardware not included. Fits:FLST 1986-UPFLT 1986-UPAdditional Information

Chrome heavy duty motor mount kit includes 2 mounts constructed of 1/4" thick steel, horn, and choke mount. This mount has provisions to direct mount two bolt ignition coils. Fits:FXST 1984-1998FLST...

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome top motor mount replaces the stock type and mounts motor to the top of the frame. Fits:FLST 1986-1990FXST 1984-1990Additional Information OEM No.<

Evolution Upsweep megaphone kit without heat shields. Includes one piece front header pipe and two right hand upsweep megaphone muffler for a true "Stack" chrome look.Installer will be required to...

Side by side drag Pipe Set feature a chrome finish with a 1-3/4" outer diameter. Drag exhaust pipe set has slash cut ends. Pipe will not fit with footboards.Pipe set includes chrome flange set and...

2:1 siamese exhaust header set features a black finish. The pipes fit over the cam cover for the "Tourist Trophy" race look.Order replacement t-bolts, if required. Does not include oxygen sensor...

Chrome exhaust header set features down draft style slash cut ends with a " outer diameter and oxygen sensor ports welded in place. Bracket included that connects the 2 header pipes together, does...

V-Twin - 30-0329 - Exhaust Taper Valves ExtrudedDescriptionSteel exhaust taper valves fit into exhaust between pipe and head to put back the low end torque which is lost when large diameter or...

Rear one piece header pipe features chrome finish and is for rigid frame applications. Fits: FXD 1991-2017 FLST 1986-2017 FXST 1984-2017 Additional Information

Front one piece header pipe features a chrome finish with an upsweep end for rigid frame applications. Fits: FXD 1991-2017 FLST 1986-2017 FXST 1984-2017 Additional Information

V-Twin - 28-2251 - O-Ring Style Handlebar Grip SetDescriptionV-Fire grip set has flat O-ring rubber bands and chrome plating. The throttle sleeve will accept single or dual cables. Features a die...

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

V-Twin - 28-2229 - Rail Style Grip SetDescriptionV-Fire black rubber rail style. Chrome die cast construction with black rails. For use with 1" handlebars.Sold in a quantity of 2. Fits:FXR...

Handlebar damper is nylon and provides stiffer dampening action and longer life. Fits: FXR 1982-1994 FXD 1991-2017 XL 1973-2003 FX 1973-1984 FLST 1986-2017 FXST 1984-2017 FL 1973-1984 Additional...

V-Twin - 28-2217 - Rubber Battery StrapDescriptionRubber battery strap is OE replacement type. Fits:FLTC 1980-UPFLT 1980-UPXL 1979-1979FXST 1984-1992FLST 1986-1992Additional Information

V-Twin - 28-2002 - Master Cylinder Fluid Level WindowDescriptionFluid level window for handlebar master cylinder rebuild kit . Fluid level window is also stock OE replacement type. Fits:FLT...

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1985 - Replica Black Waffle Handlebar Grip Set with Plug HoleDescriptionReplica black waffle grips are soft rubber and have a 1-1/8" inner diameter on the throttle grip and 1" on the left...

V-Twin - 28-1952 - Speedometer Isolation Mount KitDescriptionSpeedometer isolation mount kit includes two pins, clips, bushings, and molded outer ring which helps prevent damage to speedometer by...

V-Twin - 28-0975 - Grey Grip Set 1909 StyleDescriptionThese grey rubber 1909 style grips will give your modern bike a cool retro style. Grips are for a 1" and 1-1/8" handlebar.Sold in a quantity of 2...

Tourist Trophy grip set constructed of real rubber features a 1-1/8" inner diameter on the throttle grip and 1" on the left grip.Sold in a quantity of 2. Fits:FXST 1984-1999FLT 1974-1999FXD...

Handlebar damper bushing is the original rubber type.Sold in a set of 4. Fits: FXD 1991-2017 FXST 1986-2017 FLST 1986-2017 FXR 1988-1994 Additional Information

V-Twin - 28-0787 - Replica White Waffle Style Grip Set with Chrome PlugsDescriptionReplica white waffle grips are soft plastic and have a 1-1/8" inner diameter on the throttle grip and 1" on the left...

V-Twin - 28-0784 - Contour Style Handlebar Grip SetDescriptionThe Odins contour grip is constructed of billet alloy with chrome finish.*NOTE: For show or decorative use. Sold in a quanity of 2...

V-Twin - 28-0763 - Replica Black Waffle Handlebar Grip Set with Chrome PlugsDescriptionReplica black waffle grips are soft rubber and have a 1-1/8" inner diameter on the throttle grip and 1" on the...

V-Twin - 28-0749 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends are 1/4"-20 coarse thread hex type.The rubber mount can be used for various applications on both...

V-Twin - 28-0678 - Billet Slugger Style Grip SetDescriptionChrome billet grip set, slugger style, will accept single or dual cable assemblies.Sold in a quanity of 2. Fits:FXR 1982-1994FXST...

V-Twin - 28-0642 - Billet Band Style Grip SetDescriptionBillet chrome with multi bands.Sold in a quanity of 2. Fits:FXR 1982-1994FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-2017XL 1974-UPFLST...

V-Twin - 28-0619 - Battery Tray ISO StudDescriptionISO dash rubber mounting stud with male-female end has 5/16"-18 UNC thread. The rubber mount can be used for various applications on both stock and...

V-Twin - 28-0594 - Black Grip Set 1909 StyleDescriptionBlack 1909 style handlebar grip set for use with dual cable. Fits:FXR 1982-1994FL 1974-1984FX 1974-1984FXST 1984-2015FXD 1991-2017XL 1974-UPFLST...

V-Twin - 28-0591 - Brake Pedal PadDescriptionStreamliner brake pedal pad is easy to install. Pad is black rubber with three chrome bands. Fits:FLT 1980-1984FLST 1986-UPFLT 1985-UPAdditional...

V-Twin - 28-0586 - Billet Faceted Style Grip SetDescriptionChrome billet faceted grip set for single or dual assembliesSold in a quanity of 2. Fits:FXR 1982-1994FXST 1984-2015XL 1982-UPFXD...

V-Twin - 28-0584 - Billet Diamond Style Grip SetDescriptionChrome billet throttle grip set, smooth style.Sold in a quanity of 2. Fits:FXR 1982-1994FL 1974-1984FX 1974-1984FXST 1984-2015FXD...

V-Twin - 28-0583 - Billet Fat Style Grip SetDescriptionFat billet grip, 1-1/4" inner diameter, match outer diameter of large bars for symmetry will accept single or dual throttle cable.Sold in a...

V-Twin - 28-0582 - Billet Fat Style Grip SetDescriptionFat billet grip will accept single or dual throttle cable.Set of two. Match outer diameter of large bars for symmetry. Fits:FXR 1982-1994FL...

V-Twin - 28-0581 - Billet Smoothie Style Grip SetDescriptionChrome billet grip set, smoothie style, for single or dual cable use.Sold in a quanity of 2. Fits:FXR 1982-1994FXST 1984-2015XL 1982-UPFXD...