Softail Standard FXST

Rear wheel assembliy features a 40 hole 16" x 4" chrome rim, 40 chrome spokes and a chrome rear hub with bearings installed. Wheel is laced and trued.Accepts a 130-140 tire size. The inner bearing...

Features a Replica 21" x 2.15" chrome rim, a chrome hub with 3/4" bearings, and 40 polished stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE: All...

Rear wheel assembly features a 40 hole 16" x 3" chrome rim, 40 polished stainless steel spokes and a chrome rear hub. Wheel is laced and trued.*NOTE: 32mm on the pulley side, valve stem side. 27mm...

Rear wheel assemby features a 40 hole 16" x 3" chrome rim, 40 chrome spokes and a rear hub. Components are laced and trued.Accepts a 130-140 tire size. Deluxe rim is OE type with small center valve...

21" x 2.15" front single disc wheel with twirled spokes include chrome hub with internals, rim and 40 twirled chrome spokes assembled.NOTE: All spokes on wheel need to be inspected and re-torqued...

16" x 3.00" rear wheel with 40 twirled spokes include chrome hub with internals, rim and twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica 21" x 2.15" single disc front wheel with chrome rim, 40 chrome hub with 3/4" bearing, stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE:...

Wheel features a Replica 16" x 3.00 drop center rim, a chrome hub with 3/4" bearings, and polished 40 stainless steel spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks...

16" x 3.00" rear wheel assembly features a chrome rim, 40 stainless steel spokes, chrome hub with internals.*NOTE: 32mm on the pulley side, valve stem side. 27mm offset on the disc side. **NOTE: All...

These rear wheel assemblies start with a 40 hole 18" x 4.25" chrome rim, 40 chrome spokes and a rear hub with internals. Accepts a 130-140 tire size.NOTE: All spokes on wheel need to be inspected and...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 stainless steel spokes.The flange of the hub measure 7" between each...

16" x 3.0" rear wheel assembly includes an aluminum chrome hub, a chrome profile smoothie rim and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Features a Replica 21" x 3.25" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forksNOTE: All spokes on wheel...

Features a Replica 23" x 3.00" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.If you would like your bike to shine this spring and give it a new life, check out our chrome 23" x 3...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Chrome rear wheel features a 16" X 3.00" chrome rim with small center hole for valve stem, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE:...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 stainless spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 40 chrome spokes.Wheel is laced and trued. **NOTE: All spokes on wheel need to...

18" X 2.50" rear wheel assembly has a chrome rim, 40 spokes and hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. Fits:FXRS...

Wheel features a 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes.The flange of the hub measure 7" between each other. *NOTE: 32mm on the pulley side, valve stem side. 27mm...

Wheel features a Replica 16" x 3.00 chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Single disc wheel is assembled and ready to directly bolt on to 41mm forks. This wheel has a side...

Features a Replica 21" x 2.15" chrome rim, a chrome hub with 3/4" bearings, and 40 chrome spokes.Rim has a rolled edge design for added strength. Single disc wheel is assembled and ready to directly...

Engine bar features 1-1/4" tubing.This engine bar is not for use with extended forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection...

Raw steel hardtail rear frame section has replica forged axle plates for the exact look of the 1950's rigid frames. Accepts FXST oil tank, transmission mount plate and electric start.Hardtail for...

Left side caliper frame mount bracket for right side drive motorcycles must be welded on. Bracket is for rigid frames when mounting brake units. Fits:FLST 1987-1999FXST 1987-1999Additional Information

Big Twin neck forgings machined to accept stock diameter tubing with 30  rake.Includes key lock tab and right hand number boss forged in neck. *NOTE: This frame neck does not include Manufacturer's...

Softail top frame plate features a raw steel finish, to match with seat area plate on 1986-1999 Softail original frames.For Hardtail installation. *NOTE: Align with the (2) 1/4" holes in plates. ...

V-Twin - 50-1910 - Sissy Bar Detachable Side Plates BlackDescriptionGloss black detachable side plates for easily adding or removing detachable accessories. Fits:FXST 1984-1999FLST 1986-1999 Except...

V-Twin - 50-1088 - Front Fender Mount Kit ChromeDescriptionChrome front fender mount kit includes acorn nuts. Kit attches fender to original style assembly. Fits:FXST 1994-UPAdditional Information

Rear fender kit includes steel fender, Replica chrome struts , chrome license plate bracket, and tail lamp with hardware.We suggest pre fitting the fender prior to painting. ...

Rear shorty fender features a primer finish. For Softail models.Fender does not includes tail lamp mount. Fits:FLST 1986-1999FXST 1986-1999Additional Information

Drag Specialties - DS750507 - Cylinder - 1340cc - 1984-1999 Big TwinFeaturesReplacement cylinders feature ductile cast-iron sleeves in aluminum castingsSleeve has external ribs that “lock” the sleeve...

Drag Specialties - DS393492 - Front Fender - Raw - SteelFeaturesRaw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mountsAttach with OE...

Drag Specialties - DS380201 - Spoke Set - Drop Center - Front/Rear - Stainless Steel - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke...

Drag Specialties - DS380140 - Spoke Set - Drop Center - Front - Chrome - 21"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380132 - Spoke Set - Drop Center Front - Chrome - 7.75" x 18"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380130 - Spoke Set - Drop Center - Front - Chrome - 19"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS380120 - Spoke Set - Drop Center - Custom 40-Spoke - Front - Chrome - 21"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and...

Drag Specialties - DS380101 - Spoke Set - Drop Center - Front/Rear - Chrome - 16"FeaturesStrong, quality spoke sets used in stock and custom applicationsAll sets include nipples and spoke wrench for...

Drag Specialties - DS376513 - Rocker Box Cover - Evo Big TwinFeaturesQuality construction with exact dimensions ensures a perfect, leakproof fitSold each; two required per motorSpecs