Sportster Custom XL883C

Kit includes upper and lower bearings, seals, retaining rings, dust covers, washers, screws, and damper seals.Kit includes bushings. Fits:FXD 1991-2005FXR 1987-1994XL 1988-2014Additional Information

Feature high tensile strength wire construction with ground ends. Fits:XL 2004-2008Additional Information OEM No.45376-04

Chrome top triple tree for XL models accepts 39mm fork tubes. Fits:XL 2004-2016Additional Information OEM No.45966-04

Chrome lower triple tree for XL models accepts 39mm fork tubes.*NOTE Features the stops so trees do not hit the tank. *NOTE: Fork stem is internally threaded to accept cap/stud nut. Fits:XL...

Replica chrome forged aluminum top triple tree for 39mm fork tubes.Gauge bracket mount holes are 5/16 x 18" thread with 10.5cm center to center. Center to center distance of fork tube is 180cm in...

V-Twin - 24-0863 - 39mm E-Z Fill Fork Tube PlugDescriptionE-Z fill fork tube top plug 39mm feature small oil fill cap built into fork tube top plug. Small oil fill cap allows fork oil change or fill...

V-Twin - 24-0841 - 39mm Chrome Fork BraceDescriptionChrome fork brace is a four piece design, that goes on top of the lower leg, for easy installation on 39mm forks. Fits:FXD 1991-2005XL 1988-UPFXR...

V-Twin - 24-0787 - Fork Damper Tube Screw and WasherDescriptionFork damper tube screw with washer for Showa forks, FXWG and FXS models.Sold as a pair. Fits:FX 1975-1984XL 1979-UPFXR 1982-1994XL...

V-Twin - 24-0786 - Fork Damper Tube ScrewDescriptionShowa fork damper tube screw only Fits:FX 1975-1984XL 1979-UPFXR 1982-1994FXD 1991-2017FLST 1986-2005FL 1977-1984FXST 1984-2005FX 1980-1986Additi

V-Twin - 24-0676 - 39mm Fork Tube Damper Ring NylonDescriptionNylon ring for fork tube damper. Fits:FXR 1987-1994XL 1987-UPAdditional Information

V-Twin - 24-0375 - Lower Fork Damper TubeDescriptionLower fork damper tube.Sold as a pair. Fits:FXD 1991-2005XL 1990-UPAdditional Information

V-Twin - 24-0335 - Chrome Top Fork Tube Plugs without HoleDescriptionChrome top fork plugs without hole is for 39mm. Plug has a flat top.Sold as a pair. Fits:XL 1988-UPFXD 1991-2017FXR...

V-Twin - 24-0181 - 39mm Fork Slider Lower Bushing SetDescriptionLower fork slider bushing set is 39mmSold as a pair. Fits:FXD 1991-2005XL 1988-UPFXR 1988-1994Additional Information

20th century fork spring lowering kit for Showa forks have progressively wound springs that resist bottoming out and features high quality and performance. Kit includes springs, spcers and hardware...

Kit comes with boot covers and dust seals. Fits:FXD 1991-2005FXR 1987-1994XL 1988-2005Additional Information UOM1 - KIT

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Chrome 39mm lower fork sliders are for single disc front brake.Sold as a pair. Fits:XL 2000-2007FXDL 2001-2003FXD 2000-2003Additional Information

Polished fork sliders are single disc for FXD, FXDL and XL models.The brake mount distance center to center measures 2-3/4". Sold as a pair. *NOTE: Must order bushings separately, not included...

Fork tube set is stock length 23-3/8".Before installing, compare new and old tubes. Be sure the stock top plug threads it into the new fork tubes. Sold as a pair. *NOTE:...

Vibration shim for rear pads to dampen pad rattle is zinc plated. Fits:XL 2004-2013Additional Information OEM No.42839-04

Smooth style chrome front master cylinder cover come with the top gasket, view plug and screw.. Fits:XL 2004-2006Additional Information OEM No.4231

V-Twin - 23-9173 - Brake Rod Plunger EndDescriptionZinc brake rod plunger end. Fits:FXR 1987-1994 Late 1987XL 1987-UPFXR 1982-1987 Early 1982Additional Information

Chrome 4 piston brake caliper kit is direct replacement for stock caliper and bracket. The pistons are hard anodized aluminum for superior operation and long life. Brake pad springs eliminate rattles...

Front right and left black 2 piston caliper set. Fits:XL 2000-2009Additional Information UOM1 - SET Finish

V-Twin - 23-1986 - Brake Rod Plunger EndDescriptionBrake rod end with pin and is 5/16" X 24 thread. Fits:XL 1987-UP Late 1987FXR 1987-1994 Late 1987Additional Information

Brake pedal assembly includes a chrome pivot, polished pedal and rear brake control retaining ring. Fits:XL 2004-2020Additional Information UOM1 - KIT

V-Twin - 23-1758 - Brake Pedal Spring WasherDescriptionBrake pedal spring washer.Sold in a quantity of 2. Fits:FX 1983-1986FXST 1984-1986XL 1982-UPAdditional Information

Front right and left chrome 2 piston caliper set. Fits:XL 2000-2009Additional Information UOM1 - SET Finish

V-Twin - 23-1656 - Rear Brake Pedal PolishDescriptionPolish rear brake pedal.*NOTE: Will not fit XLC models. Fits:XL 2004-UP 883, 883L, 883R, and 1200RAdditional Information

Brake pad pins for the rear brake pads. Fits:XL 2004-2013Additional Information OEM No.42837-04 UOM1

Brake pad pins for the front brake pads. Fits:XL 2004-2013Additional Information OEM No.42832-04 UOM1

V-Twin - 23-0989 - Chrome Front 4 Piston Caliper and 11-1/2 inch Disc KitDescriptionKit includes a chrome 4 piston caliper with bracket and pads , a polished stainless steel drilled 11-1/2" disc, and...

V-Twin - 23-0809 - Brake Pedal Pivot/Clevis ChromeDescriptionChrome brake pedal pivot/clevis for mounting the brake pedal to the mount bracket. Fits:XL 2004-UPAdditional Information

V-Twin - 23-0780 - Footpeg Support Driver Right SideDescriptionDriver footpeg chrome support bar for the right side brake pedal mount. Fits:XL 2004-UPAdditional Information

Zinc support bracket for the rear master cylinder. Bracket supports the right side. Fits:XL 2004-2016Additional Information UOM1 - EA

Rear master cylinder assembly with reservoir features a chrome finish. Fits:XL 2004-2006Additional Information UOM1 - KIT

Rear master cylinder assembly with reservoir features a black finish. Fits:XL 2004-2006Additional Information UOM1 - KIT

V-Twin - 22-0989 - XL Stock Mid Control KitDescriptionXL stock mid control kit features a polished pedal and is for use with stock footrests.Accepts male footpegs stock or custom. *NOTE: Order...

Black handlebar control kit includes complete chrome 14 mm bore master cylinder, clutch handle with clamp, 2 pairs of black switch housings and stainless steel mounting hardware for dual disc...

Black Handlebar Control Kit includes complete 1/2" bore master cylinder, clutch handle with clamp, 2 pairs of black switch housings and stainless steel mounting hardware. Fits:XL 2004-2006Additional...