Sportster XLH1000

2023 New Production chrome lower pushrod covers.Sold as a set of 4. Fits:XL 1979-1985 Late 1979Additional Information OEM No.17937-79

Exhaust valve, chrome Fits:XL 1958-1985Additional Information OEM No.18080-58A UOM1 - EA <

Sifton Titan cam set will produce excellent results in well aspirated or very large motors. Cam lift is .436.This is the bolt on type. Timing is taken at .053 of the lift off the low spot on the heel...

Stianless steel 12 point sprocket bolt and nut kit with washer head, features a 7/16"-20 x 1-1/4" thread. Fits:FX 1973-1984 cast or wire wheelFL 1973-1984 cast or wire wheelXL 1973-1990 cast or wire...

Rear disc tapered screw set includes 5 screws and 5 nuts. Fits: XL 1979-1991 FL 1981-1984 FLST 1986-1991 FX 1981-1984 FXST 1984-1991 Additional Information

Allen screw kit for the primary cover includes 11 screws with 11 washers. Fits:XL 1977-1984Additional Information UOM1 - SET

Sprocket cover knurled allen screw, chrome finish Fits:XL 1977-1984Additional Information UOM1 - KIT Manufactu

When restoring your Big Twin, don't overlook your rocker boxes. Replace the old rocker caps with our V-Twin chrome rocker shaft end nuts. These end nuts have a allen style head and are for 1971-1984...

Chrome domed triple tree fork stem nut features 7/8" x 24 inside threads. Fits:FX 1971-1984XL 1978-1987Additional Information UOM1 - EA

Chrome front motor mount acorn style bolts are extra long at 7.5". Fits:XL 1957-1983Additional Information UOM1 - KIT

Oil pump mount set features allen style screws.Includes (4) 1/4"-20 x 2-1/2" and (2) 1/4"-20 x 2-3/4" screws. *NOTE: When mounting oil pump mount set to V-Twin engine cases, it does not require a...

The chrome rocker arm shaft end plug makes installation and removal a much easier job than with the original slotted part. Includes 4 plugs per set. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR...

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

Wheel features a 16" X 3.00" black rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 ...

Front 23" x 3.00" wheel assembly features chrome spokes, chrome hub, and chrome rim. This wheel fits single or dual disc applications.*Note: UPS may consider this part as packaged "oversize" for...

21" X 2.15" Front single or dual disc wheel includes chrome alloy hub with bearing, 40 chrome twirled spokes and a chrome drop center rim.Rim has a rolled edge design for added strength. ...

Replica 21" X 2.15" front wheel feature a chrome hub with internal bearings installed, 40 polished stainless steel spokes and a chrome rim.NOTE: All spokes on wheel need to be inspected and...

Replica 19" X 2.50" front wheel feature a chrome drop center hub with internal bearings installed, 40 polished stainless steel spokes, and a chrome rim.NOTE: All spokes on wheel need to be inspected...

16" X 3.00" wheel assembly features chrome rim, 40 polished stainless steel spokes, chrome hub with internals.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

V-Twin - 52-0301 - 19 inch X 2.50 inch Wheel Rim and Spoke Kit ChromeDescriptionRim and spoke set include 19" x 2.50" front rim with 40 chrome spokes with 40 spoke nipples.Rim is steel and drop...

V-Twin - 52-0300 - 16 inch x 3 inch Wheel Rim and Spoke Kit Chrome SteelDescriptionRim and spoke set include 16" x 3" front rim with 40 chrome spokes with 40 spoke nipples.For use with a steel hub...

Wheel features a 16" x 3" chrome drop center rim with a small center valve stem hole, a chrome hub with internals and 40 chrome twirled spokes.Wheel is lace and trued. ...

Wheel features 16" X 3.00" chrome rim, chrome hub with internals, and 40 chrome spokes, assembled.Includes snap ring. **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles...

Replica 19" X 2.50" dual disc front wheel feature a chrome drop center hub with internal bearings installed, 40 chrome spokes and chrome rim.**NOTE: All spokes on wheel need to be inspected and...

Replica 21" X 2.15" dual disc front wheel feature a chrome hub with internal bearings installed, 40 chrome spokes, and a chrome rim**NOTE: All spokes on wheel need to be inspected and re-torqued...

200 XL rigid frame features a 40  rake with a 3" stretch in front legs to accept a 1-1/8" belt with 200 series tire.Frame has kickstand tab and battery box mount welded in place. Accepts a right side...

V-Twin - 51-1322 - Lowered Rear Axle Plate Set RawDescriptionLowered rear axle plates are threaded 3/8"-18 for fender brace sissy bar mounting. Adjusters threaded 3/8"-24 use screws for adjusters, to...

XL control mount set features a black finish. Control mounts for right (2 bolt plate) and left (3 bolt plate) to accept Big Twin forward controls.Set is used to mount 1941-1999 Big Twin forward mount...

V-Twin - 51-0484 - XL Hardtail Axle Plate SetDescriptionRaw set of right and left axle plates for Sportster hardtails, features 7/8" slots on both sides. Fits:XL 1982-UPAdditional Information<

Kit mounts to adapt 1957-1985 Ironhead motors into 1986-2003 XL rigid frames.Ironhead motor installation kit includes front and rear mounts and hardware. Fits:XL 1957-2003Additional Information

XL rear motor mount pad is the tall type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

XL rear motor mount pad is the short type, featuring a cast steel construction. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount plate features a raw steel finish and is for use on custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

V-Twin - 51-0066 - Frame Motor Mount Tab RawDescriptionFrame motor mount tab must be welded on and features raw casting. Fits:XL 1982-UPAdditional Information

Rear motor mount frame plate features a raw steel finish and is for use on hardtails and custom frames. Fits:XL 1982-2003Additional Information UOM1 - EA

Rear motor mount casting features an investment cast construction and is for rigid frames. Fits:XL 1982-2003Additional Information UOM1 - EA <

Bobbed rear fender kit includes steel fender and chrome tail lamp bracket which includes cateye tail lamp.We suggest pre fitting fender prior to painting. Order chrome struts and covers separately. ...

V-Twin - 50-0625 - XL Rigid Tool Box KitDescriptionLeft side tool box kit is the weld on type for rigid frames on Sportster builds.*NOTE: Weld bracket to lower rigid frame hardtail tube position or...

Drag Specialties - DS750755 - Piston - XLFeaturesOEM quality cast aluminum alloy constructionSome fitments feature pistons with a coating that extends piston life, reduces friction and allows for...