Sportster XLH1000

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

V-Twin - 31-1473 - License Plate Relocation Bracket BlackDescriptionBlack license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

V-Twin - 31-1472 - License Plate Relocation Bracket ChromeDescriptionChrome license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Black battery tray support carrier bracket. Battery tray mount, available separately. Fits:XLH 1967-1978Additional Information OEM No.66480-67

Raw side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA

Chrome side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA <

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA Measurements

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Pipe clamps for crossover exhaustsSold in a quantity of 2. Fits:XL 1975-1980Additional Information OEM No.65412-75

V-Twin - 31-0271 - License Plate Frame Bracket Kit ChromeDescriptionLicense plate kit includes stock style 3-hole bracket assembly, license backing plate, frame and 4 krommets.For show or off road...

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

Stainless steel exhaust header clamp set.Sold in a quantity of 2. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.65519-52<

Saddlebag bracket set chrome are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1952-1978Additional...

Solid State regulator mount bolts directly to 2-brush generator housings on Big Twin and Sportster models.Regulator mount fits Accel and V-Twin finned type regulators. Fits:XL 1958-1978FL...

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information

V-Twin - 31-0158 - License Plate Frame Bracket ChromeDescriptionChrome 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Zinc horn mounting plate replaces stock OE. Fits:XL 1971-1985Additional Information OEM No.69117-71A UOM<

Black horn bumper bracket is constructed of metal and replaces stock OE. Fits:XL 1973-1985Additional Information OEM No.69041-73

Chrome ignition coil mount bracket fits stock coil. Fits:XLCH 1971-1994XL 1971-1994Additional Information OEM No.31723-71A

Chrome battery tray support carrier bracket Fits:XLH 1967-1978Additional Information OEM No.66480-67 UOM<

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65

Black finish electric starter block off plate is used when starter assembly is removed. Fits:XLH 1970-1978 Starter assembly is removedXLCH 1970-1978Additional Information

Zinc upper horn and choke bracket Fits:XL 1972-1985Additional Information OEM No.69129-72A UOM1 - EA<

2 piece front lower motor mount plates features a chrome finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information OEM No.16210-52A

Top motor mount 4-piece kit includes upper horn and choke bracket zinc, chrome upper front motor mount, and chrome cross bracket cylinder head. Fits:XL 1977-1981Additional Information

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67

Electric starter motor clamp with stainless steel finish. Fits:XLH 1967-1980Additional Information OEM No.31473-67

V-Twin - 31-0086 - License Plate Frame Bracket BlackDescriptionBlack 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs...

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid...