Sportster XLH1000

Chrome bracket for tachometer. Fits:FX 1974-1984XL 1974-1985Additional Information OEM No.92116-74 UO

V-Twin - 31-3943 - License Plate Frame Bracket Kit ChromeDescriptionChrome fender mount 3-hole bracket kit includes a rubber anti-vibration block to cushion it against the fender. Also mounts to...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

V-Twin - 31-1473 - License Plate Relocation Bracket BlackDescriptionBlack license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

V-Twin - 31-1472 - License Plate Relocation Bracket ChromeDescriptionChrome license plate relocation bracket. Relocates plate to above tail lamp. Fits behind late style tail lamps mounted on fender...

Carburetor support bracket features a zinc plated finish.For Bendix an Keihin butterfly carburetors only, not for CV type. Fits:FL 1972-1984FLT 1985-1992XL 1972-1987Additional Information

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Raw side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA

Chrome side mount tail lamp bracket is best used with a vertical plate, for XL models. Fits:XL 1971-1985Additional Information UOM1 - EA <

Side mount bracket mounts to stock swingarm and is chrome billet. This bracket will accept vertical or horizontal billet tail lamp assemblies from our selection.Order nut set separately. Fits:XL...

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Chrome saddlebag supports are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1979-1981Additional...

Solo seat hardware mount kit includes nose brackets, 2" high springs and rear brackets.Use this kit to mount smaller solos such as K or CH types. "P" clamps are not included in this kit. To mount...

Pipe clamps for crossover exhaustsSold in a quantity of 2. Fits:XL 1975-1980Additional Information OEM No.65412-75

V-Twin - 31-0271 - License Plate Frame Bracket Kit ChromeDescriptionLicense plate kit includes stock style 3-hole bracket assembly, license backing plate, frame and 4 krommets.For show or off road...

V-Twin - 31-0255 - Turn Signal Mounting Clamp Screw KitDescriptionTurn signal mounting kit contains 4 pieces, 2 short and 2 long screws. Fits:FXST 1984-UPFX 1973-1984XL 1973-UPFXR 1984-1994Additional...

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information

V-Twin - 31-0158 - License Plate Frame Bracket ChromeDescriptionChrome 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Upper front top motor mount is chrome Fits:XL 1979-1981XLH 1979-1981Additional Information OEM No.16265-76

Zinc horn mounting plate replaces stock OE. Fits:XL 1971-1985Additional Information OEM No.69117-71A UOM<

Black horn bumper bracket is constructed of metal and replaces stock OE. Fits:XL 1973-1985Additional Information OEM No.69041-73

Chrome ignition coil mount bracket fits stock coil. Fits:XLCH 1971-1994XL 1971-1994Additional Information OEM No.31723-71A

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65

Zinc upper horn and choke bracket Fits:XL 1972-1985Additional Information OEM No.69129-72A UOM1 - EA<

2 piece front lower motor mount plates features a chrome finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information OEM No.16210-52A

Top motor mount 4-piece kit includes upper horn and choke bracket zinc, chrome upper front motor mount, and chrome cross bracket cylinder head. Fits:XL 1977-1981Additional Information

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67

Electric starter motor clamp with stainless steel finish. Fits:XLH 1967-1980Additional Information OEM No.31473-67

V-Twin - 31-0086 - License Plate Frame Bracket BlackDescriptionBlack 3 bolt license plate bracket for fender mounting. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL 1973-UPAdditional Information

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs...

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

1-3/4" staggered dual pipe exhaust system includes 38" long tapered mufflers. This exhaust system is for 1979 Sporster without kick start only. Includes slider channels on the mufflers and hanger...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid...

Alphabet Sportster exhaust header set features a raw finish. Set is used for Sportster Ironhead models.Set will fit stock Sportser models, including 1971-1984 models with forward controls and...