Sportster XLH900

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information

Black exhaust support tube mounts drag pipes or stock mufflerrs system to 1958-1979 XL-XLH models Fits:XL 1958-1978Additional Information OEM No.65316-65

Distributor breaker hold down clamp. Fits:XL 1952-1970WL 1936-1973Additional Information OEM No.32515-66

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is extra...

Chrome allen exhaust clamp set feature a unique design which allows the bolt to be nearer the exhaust pipe for positive clamping strength which permits easy access with hex wrench. Clamp set is...

Stainless steel exhaust clamps are designed with a heat treated T bolt and self locking nut.Sold in a quantity of 2. ...

Chrome front clamp pipe with angle.Clamp has an inner diameter of 1-3/4". Fits:XL 1958-1978Additional Information OEM No.65514-58

V-Twin - 31-1966 - Linkert Carburetor Mount Bracket Zinc PlatedDescriptionLinkert carburetor mount bracket features a zinc plated finish. Fits:XL 1957-1972Additional Information

XL finned header clamp set is investment cast aluminum with a vibration finish on a shot peen natural surface.*NOTE: Tighten set with 5/16" allen screws that are provided, the front and rear are the...

Stainless steel XL muffler clamp features an inner diameter of 1-7/8" and a reinforced clamp pad area. Clamp features reinforcing pad spot that is welded in place for extra clamping power!*NOTE:...

Black 2 bolt license plate bracket for fender mounting. Fits:FX 1971-1972GL 1955-1972XL 1955-1972Additional Information UOM1 - EA<

XLCH exhaust mount kit includes clamps and frame support tube and accepts mufflers.Kit includes a chrome front pipe clamp, a stainless steel exhaust header clamp set, a chrome 1-7/8" heavy muffler...

XL motor mount plate set is constructed of raw steel. Set includes right and left plate set used to incorporate mount ports to accept late model forward controls. Fits:XL 1957-1981Additional...

2 piece front lower motor mount plates features a black finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information UOM1 - SET

Black battery tray support carrier bracket. Battery tray mount, available separately. Fits:XLH 1967-1978Additional Information OEM No.66480-67

Regulator rectifier mount is for a 12 volt Bosch generator and has a chrome finish. Fits:XL 1958-1978FL 1958-1969Additional Information UOM1 - E

Chrome seat spring support bar Fits:XL 1957-1978Additional Information UOM1 - EA Measurements

Zinc plated carburetor support bracket mounts to air cleaner backing plate.Mounts to mount stud at tappet base. Fits:XL 1957-1985Additional Information OEM

Zinc carburetor cable bracket Fits:XL 1966-1971Additional Information OEM No.27449-66 UOM1 - EA<

Stainless steel exhaust header clamp set.Sold in a quantity of 2. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.65519-52<

Saddlebag bracket set chrome are designed to fit the contour of the fender struts and protect your bags from the brake caliper and swingarm.Sold in a quantity of 2. Fits:XL 1952-1978Additional...

Solid State regulator mount bolts directly to 2-brush generator housings on Big Twin and Sportster models.Regulator mount fits Accel and V-Twin finned type regulators. Fits:XL 1958-1978FL...

Chrome bracket set for front fork triple tree spotlamp mounting includes both right and left sides.The mounting holes measures 7-1/4" from eye to eye. Fits:XL 1952-1985Additional Information

Chrome 2 bolt license plate bracket for fender mounting. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information OEM No.59995-5

Top motor mount chrome bolts from the cylinder bracket to the frame. Fits:XL 1957-1976Additional Information OEM No.16251-58

Chrome battery tray support carrier bracket Fits:XLH 1967-1978Additional Information OEM No.66480-67 UOM<

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65

2 piece front lower motor mount plates features a chrome finish.Sold in a quantity of 2. Fits:XL 1952-1981Additional Information OEM No.16210-52A

Top motor mount chrome 2 piece set for 1957-1976 XL Fits:XL 1957-1976Additional Information OEM No.16250-57 UO

Top motor mount chrome accepts molded coil and is not equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1

Top motor mount chrome accepts molded coil and is equipped with a key switch hole. Fits:XLH 1957-1977XL 1957-1977Additional Information UOM1 - E

Cast rear replacement is a two bolt style motor mount. Fits:XL 1967-1981Additional Information OEM No.16203-67

Electric starter motor clamp with stainless steel finish. Fits:XLH 1967-1980Additional Information OEM No.31473-67

Front solo seat nose bracket feautures a flat black finish.Bracket mounts to frame casting in the hole behind the rear gas tank mount. *NOTE: On 1957-1978 XL models, the bracket fits over the 2 tabs...

V-Twin - 31-0033 - Left Side Tool Box Mount RawDescriptionLeft side tool box one piece mount is constructed of raw steel for Sportster hardtail and rigid frame applications.Must be welded in place...

Chrome goose style drag pipes have a diameter of 1-3/4" and a length of 34". Use with heat shields.Set includes channel mounts. *NOTE: Does not come with heat shields. **CAUTION: These exhaust...

Chrome drag pipes features a 28" long front pipe and 38" long rear pipe, that will mount with stock brackets.Sold in a quantity of 2. On the front pipe the down part is 15" and the rear to the start...

Exhaust drag pipe set with formed heat shields come with 1-3/4" slash cut and is 38" long.Set of two. The customer may remove the front header clamp from the heat shield, to use (2) matching header...

Upsweep megaphone kit without heat shields. Includes one piece header pipe and two right hand megaphone muffler for a true "Stack" look. Accepts 1957-85 XL Ironhead motors. Kit is for use on rigid...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Muffler set is seamless custom type for Ironhead models. Include embossed lines on mufflers. Components available...