Sportster XLH900

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket

Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to...

Jims - 96780-58A Piston Pin Lock Ring Tool fits Pre-'73 Big Twin & Sportster Models w/ 0.515” ID Wrist Pins Features: Use to install lock ring (Harley-Davidson® No. 22582-52) in piston having ...

Uni Filter - Air Filter fits '83-'85 Sportster 1000,  '66-'E73 Sportster 900, 1000, '67-'E75 FX, FL & FLH Models (OEM #29036-72) Features: Constructed of a unique, open-cell polyurethane material...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by Ron Trock...

750 XR hub lock nut set features a zinc finish and a thread size of 2.031. Fitment: XL 1957-1972 WR 1941-1952

750 XR rear wheel hub is chrome plated and includes 2 nuts. For 40 spoke hole rims.Features knock off threaded end for "quick change" rear sprockets. Includes 11/16 bearings to fit stock sportster...

750 XR rear wheel hub features an alloy finish and includes 2 nuts. For 40 spoke hole rims. Features knock off threaded end for "quick change" rear sprockets. Includes 11/16 bearings to fit stock...

XL billet starter mount for kick and electric models. Fitment: XL 1967-1980 Installation Instructions: Click here to view additional information

V-Fire XL starter motor. Requires a mount plate for installation. Fitment: XL 1967-1980

Clutch drum starter ring gear is 62 tooth welded-on type. Replacement ring gear for stock clutch drums. Bevel edge is for welding (outside) teeth side. Starter ring gear installs with beveled side of...

Electric starter kit includes a 1.4kw compact starter with integral Bendix, solenoid and gear reduction. Kit also includes mount plate, 4 gauge cable, two 5/16 x 24 cable ends and heat shrink tubing...

Namz - Chrome Distributor Clamp Features: For models with aftermarket/electronic distributor Polished stainless steel construction Simple

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing...

Colony - 2665-18 Cadmium Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #8881-18) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts,...

Colony - 2373-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models (OEM #45756-59) - Flat Top Features: Made in the U.S.A. Fitment

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut...

Colony - 2450-1 Front Wire/Cable Clip (OEM #9979) Features: Can be used for various custom applications High-quality reproduction of original clips

Colony - 9624-16 Parkerized Replica Cylinder Base Nut Kit fits '57-'85 XL, '29-'73 G, '29-'52 WL Models Replica parkerized cylinder base nut kit Fitment: WL 1929-1952 XL 1957-1985 G 1929-1973

V-Twin - 35mm Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models Chrome lower fork stem cover can be installed without disassembling forks. Fork stem cover is for FXR...

V-Twin - Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models (OEM #45751-71A) Chrome lower fork stem cover is 1 piece and for FXR and FXD models. Fitment: FXR...

Colony - 9798-20 Front Motor Mount Kit Hex Type fits '57-'84 Sportster Models Hex type front motor mount kit. Fitment: XL 1957-1984

V-Twin - Black Battery Top Cover fits '67-'78 XLH Model Battery top cover features a black finish Fitment: XLH 1967-1978

Colony - 9878-13 Cadmium Engine Cast Kit fits '57-'76 Sportster Models Cadmium engine case kit Fitment: XL 1957-1976

V-Twin - Starter Gasket fits '67-'80 Sportster Model (OEM #31471-67A) Starter gasket for XL York electric start kit. Fitment: XL 1967-1980 Tech Note: Suggested to use with #32-1642 XL York...

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube,...

V-Twin - Replica Front Brake Shoe Set fits '71-'72 FX, '64-'72 Sportster Models (OEM #41849-64) Replica front brake shoe set features a die cast construction with linings bonded on. Sold as a pair...

V-Twin - Front Brake Backing Plate fits '71-'72 FX, '64-'72 Sportster Models (OEM #44148-64) Polished aluminum front brake backing plate is for front mechanical drum models Fitment: FX 1971-1972 XL...

V-Twin - Front Wheel Hub fits '71-'72 FX, '64-'72 Sportster Models (OEM #43600-64) Front hub wheel includes bearings and snap ring installed and comes completely assembled Fitment: FX 1971-1972 XL...

V-Twin - Chrome Header Pipe fits '57 '69 XLCH, '57-'78 Sportster Models (OEM #65454-59) XLCH header pipe features a chrome finish. Header set fits with XLCH wrap around tank only. The rear muffler...

V-Twin - Replica Exhaust Header Pipe fits '57-'68 Sportster Model Replica chrome header pipe feature a 2 into 1 design. This pipe is one piece Fitment: XL 1957-1968

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold...

V-Twin - Black Oval Air Cleaner Insert fits '66-'75 XLH/XLCH, '67-'75 FLH/FL Models (OEM #29205-69) Oval air cleaner insert features alloy fins on a black background. Fitment: XLH 1966-1975 FX...