Super Glide FXE Electric Start

Kayaba fork top spring collar.Sold as a pair. Fits:XL 1973-1977FX 1973-1977Additional Information OEM No.45985-73

Kayaba fork tube piston.Sold as a pair. Fits:FX 1973-1976XL 1973-1976Additional Information OEM No.45978-73

Kayaba fork damper tube screw set.Sold as a pair. Fits:FX 1973-1976XL 1973-1976Additional Information OEM No.45995-73

Kit includes neck cup bearing, dust cover set, cone cover nut, stem nut and lock washer kit. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information

Zinc fork neck cup set with races installed. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.48311-60

Chrome fork neck cup set with races installed.Sold as a pair. Fits:FX 1971-1984FLH 1949-1984FXST 1984-1987Additional Information OEM No.

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

V-Twin - 24-0114 - Upper and Lower Chrome Dust ShieldsDescriptionChrome upper and lower triple tree dust shield set is for use on Big Twin models with Timken style bearings.The lower cover is the...

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Boot cover is die cast to fit over the stock rubber fork wiper boot.Sold as a pair. Fits:XL 1973-1977FX 1973-1977Additional Information UOM

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Dura polished brake disc features a rustless finish and long service life. Compatible with all brake pads including sintered metal and OEM.Disc has a center hole inner diameter of 2". For use on...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

Chrome brake caliper mount bracket for use with 10" disc. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44166-73

Conversion kit updates 1973-1981 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake pads,...

Conversion kit updates 1973-1982 FX, FL models from a 10" disc to an 11-1/2" disc.Kit includes a 11.5" stainless steel drilled rear disc, chrome caliper bracket, and black painted caliper with brake...

Kit includes a chrome rear caliper, 10" steel drilled disc, chrome bolts, chrome support bracket, anchor bar with bolts. Fits:FLH 1973-1980FX 1973-1980Additional Information

Kit includes a rear caliper, 10" steel drilled disc, bolts, support bracket, and anchor bar with bolts in a black finish . Fits:FL 1973-1980FX 1973-1980Additional Information

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Hardware rebuild kit includes mount bracket, anchor arm, bolt set, mounting pin kit, rear brake pad set, caliper support.An oversized ground pin to repair elongated mount hole inthe caliper body is...

Oversize brake caliper mounting pin rebuild kit replaces stock mounting pin by boring caliper hole oversize giving a longer life to the caliper housing before replacement. Fits:FL 1973-1980FX...

Mount pin for rear brake caliper. Fits:FL 1973-1980FX 1973-1980Additional Information OEM No.44107-72

Replacement kit includes mounting stud, lock nut and washer, 2 brake pad pins and stainless steel caliper mounting bracket bushing.This kit eliminates brake squeaking, grinding, and caliper wobble...

Rebuild kit for handlebar brake master cylinder assemblies. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.4506

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Banana Caliper has smooth chrome finish and is fully assembled with disc pads and all internals.Caliper accepts a 1/8" National Pipe Thread line. Banana front calipers uses different pistons than the...

Our banana caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals Caliper accepts 1/8" national pipe thread line.Banana front calipers uses...

Rear banana caliper has a smooth chrome finish and is fully assembled with brake pads and all internals. Calipers accept 1/8" national pipe thread line.Includes mounting pins. Fits:FL 1973-1980...

Our Banana Caliper has a black finish with a bullseye design and is fully assembled with disc pads and all internals.Includes caliper anti-rattle kit. Caliper accepts a 1/8" national pipe thread line...

Caliper kit includes a black OE style bullseye caliper and a black steel bracket with all the internal parts. Fits:FL 1973-1980FX 1973-1980Additional Information

Zinc brake pedal. Fits:FX 1972-1979Additional Information UOM1 - EA FinishZinc

Zinc rear brake pedal bracket. Fits:FX 1972-1979FXS 1972-1979Additional Information UOM1 - EA Manufac

Chrome caliper with bracket and 11-1/2" stainless steel disc. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - KIT

Brake plunger clevis features a zinc finish. Fits:FX 1972-1982Additional Information UOM1 - EA Manufacturer

Brake caliper mount pin with acorn nut. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA