Super Glide Police FXRP

Jims - 1748 Lockdown Axle Kit fits '99-'01 FLHT Model Features: Heavy-duty swingarm end caps and axle nut washer resist the bending and flexing seen with stock components Swingarm end caps fit...

Uni Filter - Air Filter Element fits '84-'85 80” Evolution Big Twin Models (Except FLT, FLHT (OEM #29259-83A)) Features: Constructed of a unique, open-cell polyurethane material that allows...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball...

Small FXR shifter shaft bushing set features brass construction. Application uses one piece in the inner primary cover and the other one in the outer primary inspection cover. Fitment: FXR...

Colony - 9645-2 Cadmium OEM-Style Oil Pump Plug fits '84-'99 Evolution Big Twin Models (OEM #26263-80) Features: Made in the U.S.A. Fitment

Colony - 3547-5 Sprocket Bolt Zinc Plated Washer Kit fits '82-'94 FXR, '91-'17 FXD, '79-Up Sportster Models Zinc plated spring steel washers used on 7/16" rear sprocket bolts Fitment: FXST...

V-Twin - 35mm Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models Chrome lower fork stem cover can be installed without disassembling forks. Fork stem cover is for FXR...

V-Twin - Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models (OEM #45751-71A) Chrome lower fork stem cover is 1 piece and for FXR and FXD models. Fitment: FXR...

V-Twin - 3/4" Inner Diameter Rear Axle Spacer fits '82-'94 FXR, '85-'94 FXRT Models (OEM #41591-81) Chrome rear axle spacer features 3/4" inner diameter and 1-3/16" overall length. Axle spacer is for...

V-Twin - Black Embossed Battery Side Cover fits '73-'84 FXB/FXS/FX/FXE/FXEF Models (OEM #66347-91) Battery side cover is embossed style with a black finish Fitment: FXB 1973-1984 FXWG 1985-1986 FXS...

V-Twin - Nylatron Swingarm Bushing Set fits '95-'02 FLHR, '82-'94 FXR, '82-'02 FLHT/FLT Models Nylatron swingarm four piece bushing set replaces swingarm bearings and stabilizes swingarm rubber...

V-Twin - Black Finned Derby Cover fits '84-'98 FXST, '85-'94 FXR, '86-'98 FLST Models Finned derby cover features a powder coated black finish. Order gasket and screws separately. Fitment: FL...

Colony - 9910-4 Fork Slider Drain Screws fits '82-'86 FXR, '73-'84 FX, '73-Up Sportster Model (OEM #45790-80) Fork slider drain screws are supplied with washers and are s old in pairs...

V-Twin - Billet Pivot Block Set fits '82-'94 FXR Model Natural right and left pivot block set feature machined aluminum from solid billet. Fitment: FXR 1982-1994

V-Twin - Spark Plugs Nickel fits '75-'85 FL/FX Models V-Twin performance spark plugs features a nickel core electrode for a longer service life, alloy housing, 95% pure alumia insulator and a heat...

V-Twin - Nickel Spark Plugs fits '75-'85 FL/FX Models V-Twin performance spark plugs features a nickel core electrode for a longer service life, alloy housing, 95% pure alumina insulator and a heat...

V-Twin - 3/8 NPT-22MM Petcock Nut fits '86-'17 FLST/FXST, '75-'95 Sportster Models (OEM #622-83N) Brass 1/4 NPT-22MM petcock nut only Fitment: FX 1975-1984 FL 1975-1984 FXR 1982-1994 FXD 1991-2017...

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984...

V-Twin - Offset Riser Kit fits '82-'94 FXR Model Chrome FXR riser kit includes offset riser stems with a finned riser top clamp. Mounts with 1/2" x 13 hex bolts. Note: Stock height. Fitment: FXR...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts...

V-Twin - 25-1/2" Hard Chrome 35mm Fork Tube Set fits '85-'86 Sportster & FXR Models (OEM #45392-83) Features: Hard Chrome 35mm fork tube set has stock length of 25-1/2". For Showa front ends Before...

Features: Fork tube set are 23-1/4" stock length Before installing, compare new and old tubes Be sure the stock top plug threads it into the new fork tubes Sold as a pair Note: These are...

Colony - Transmission Mounting Hardware Kit fits '77-'84 Shovelhead Model (OEM #47730-77) Features: Kit includes two carriage bolts, one 3/8" - 16 x 1" bolt, four 3/8" - 24 nuts, six 3/8" lock...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers,...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit...

V-Twin - Swingarm Bearing Kit with Spherical Bearings fits '82-'02 FLT, '82-'94 FXR Models Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point Kit...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer,...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation...

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the...

V-Twin - 35mm Triple Tree Set Chrome fits '82-'87 FXR Model 35mm FXR triple tree set features a chrome finish. Fitment: FXR 1982-1987

V-Twin - Stock Kickstand Black fits '82-'90 FXR Model Features: Stock length kickstand features a black finish and is for FXR models Pin not included, must order separately Fitment: FXR 1982-1990

V-Twin - Fuel Petcock Alloy fits '82-'94 FXR Models Fuel petcock with 90° elbow features an alloy finish specifically designed for FXR models. Note: Petcock has a 5/16" fuel outlet. Fitment: FXR...

V-Twin - Rear Axle Kit Zinc Plated fits '82-'94 FXR Model FXR rear axle kit includes zinc plated components and has a 3/4" diameter. Fitment: FXR 1982-1994

V-Twin - Evolution Intake Manifold Conversion Kit (OEM #27019-83) Evolution intake manifold conversion kit converts stock rubber compliance fittings to a more rigid mount system. Includes flange set...

Colony - Rear Brake Disc Rotor to Hub Screw & Nut Kit fits '79-'91 FX, '79-'85 XL & '81-'84 FL Features: Zinc plated allen screws and locknuts Fitment

Colony - Universal Line Fitting fits '52-'99 Big Twin & '57-'85 Sportster Models (OEM #63578-52) Features: OEM replacement restoration For use with 5/16" hose