Touring Electra Glide Classic FLHTC

Zinc seat T clevis pin with spring clip Fits:UL 1937-1948EL 1936-1940FL 1941-1984WL 1929-1952Additional Information UOM1 - KIT

Special shoulder to mount stock type T bar features a black oxide finish. Fits:UL 1937-1948WL 1936-1952EL 1936-1940FL 1941-1984Additional Information

Zinc windshield bracket set allows installation of 1949-1959 type windshields on 1960-1984 FL models. Fits:FL 1960-1984Additional Information OEM No.5809

Chrome foot clutch rod lever. Fits:FL 1965-1984Additional Information OEM No.36816-65A UOM1 - EA

V-Twin - 49-0000 - Saddlebag LED Lamp KitDescriptionSaddlebag lamp kit includes a set of red LED lamps with red lens and the Touring electrical connection update kit.Harness included. *NOTE: Does not...

Black windshield pouch, with silver edge trim.Mounts to stock 1949-1984 windshields. Fits:FL 1949-1984Additional Information UOM1 - EA <

White windshield pouch, with silver edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM

Black windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information UOM1 - EA Manufacturer

White windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM<

Black dash panel decals have an adhesive back. Fits:FXDWG 1991-1993FXST 1984-1993FLST 1986-1993FL 1979-1984FX 1980-1986Additional Information

V-Twin - White Leather Solo Seat with Skirt fits '41-'84 FL, '36-'40 EL Models White deluxe solo seat features white skirt, black rosettes and nickel spots. A molded foam pad on an accurate steel...

Black naugahyde covered buddy seat with features a thin profile with a formed steel baseplate.Fastened by pop rivets. Use with a seat tee. Skirt rail not included. *NOTE: Must order mount hardware...

Bates style solo seat kit includes a genuine Bates style tuck and roll leather solo seat and all mount hardware for installation on 1965-1984 FX-FL 4 speed models with a swingarm frame.*Note: UPS may...

Black front and rear hub assembly includes all internals for 3/4" axles.Where the spokes go in is 4-1/2" wide, the center width is 2", the ends are 4" wide, and end to end is 6-5/8" long. *NOTE: Must...

Chrome 8" dresser style front hubcap fits 1981-1984 FLH between hub and axle without additional hardware.From the top to the bottom through the hole measures 2-1/4". Just the center hole from top to...

16" chrome front wire wheel cover set includes 1 cover with a hex hole and the other chrome cover with a 4.1" round hole. Set is for pentagon shaped hub flange wheels. For single disc brake wire...

16" chrome rear wheel cover set fits between disc rotor and sprocket, for 1973-1984 FLH spoke wheel models.Set is fastened with 5 bolts. Wheel cover will fit rims/wheels with Side Valve tube type...

40 spoke extra wide offset dual flage rear hub features a chrome finish. The drive side is offset 0.875" further out than standard 1973-1985 style hubs. Includes 3/4" bearings, races, seals and seal...

Chrome wheel hub is constructed of steel and includes 3/4" bearings, races, seals, and seal spacers.This hub has 3/8" and 7/16" disc mount holes. The width of the hub through the axle measures 7"...

Steel rear hub without internals. Fits:FX 1973-1984FL 1973-1984Additional Information UOM1 - EA Locat

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2034 - Wheel Hub Bearing Tube Spacer 4.448 inch Overall LengthDescriptionFront or rear wheel hub bearing tube white spacer. This spacer measures 4.448" overall length for use on cast...

V-Twin - 44-2033 - Wheel Hub Bearing Tube Spacer 4.434 inch Overall LengthDescriptionFront or rear wheel hub bearing tube yellow spacer. This spacer measures 4.434" overall length for use on cast...

V-Twin - 44-2032 - Wheel Hub Bearing Tube Spacer 4.420 inch Overall LengthDescriptionFront or rear wheel hub bearing tube red spacer. This spacer measures 4.420" overall length for use on cast wheels...

V-Twin - 44-2009 - Chrome Rear Axle Adjuster End Plate SetDescriptionChrome rear axle adjuster end plate set.Sold as a pair Fits:XL 1979-UPFX 1973-1984FL 1973-1984Additional Information

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

V-Twin - 44-1973 - Chrome Swingarm Pivot KitDescriptionChrome swingarm pivot kit includes races, bearings, spacers, lock tab, and pivot pin. Fits:FX 1976-1984FL 1973-1984Additional Information

V-Twin - 44-1957 - Rear Axle KitDescriptionRear axle kit includes a 11-7/8" bearing surface length axle, pyramid adjuster blocks and chrome nuts. Fits:FX 1973-1984 Chain Drive, rear axleFLH 1973-1984...

V-Twin - 44-0599 - Chrome Front Axle Nut and Washer KitDescriptionChrome front axle nut & washer kit. Fits:FXST 1984-UPFLST 1986-UPFL 1973-1984FX 1980-1983Additional Information

Kit includes chrome 10-5/8" bearing surface length axle with 3/4" outer diameter, nut kit, 2 spacers and washers. Fits:FXST 1984-2006FL 1973-1984 41mm forksFX 1980-1983 41mm forksAdditional...

Kit includes 10-5/8" bearing surface length axle, nuts, spacer and hardware. Fits:FLH 1981-1984Additional Information OEM No.43867-81

Chrome rear axle kit is chrome and includes 12-3/8" bearing surface length axle, nuts, and spacer. For belt drives. Fits:FX 1982-1984FL 1982-1984Additional Information

Kit includes chrome 11-7/8" bearing surface length, axle, nuts, and spacer. Fits:FX 1973-1984FL 1973-1984Additional Information OEM No.41552-73<

V-Twin - 44-0554 - Brake Disc SpacerDescriptionzinc spacer has an outer diameter of 7/16" and an inner diameter of 5/16", with a 5/16" length.Brake disc spacers will adapt 1973-up FX, FL rear hubs to...

Pull adjuster only. Fits:FX 1985-1985FX 1973-1984FL 1973-1984FL 1985-1985Additional Information UOM1 - SET

V-Twin - 44-0520 - Chrome Rear Axle Nut KitDescriptionChrome axle nut kit includes a 5/8"-18 hex nut, 2 extra thick washers and 1 lock washer.For use on square swingarms. For 3/4" axles, universal. ...

Front or rear wheel hub bearing assembly kit includes bearings, races, seals, snap rings, and seal spacers.Hub and internal bearing spacer are not included. Fits:FLH 1973-1983FX 1980-1983Additional...

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...