Touring Electra Glide Highway King FLHFB

Replica zicad plated heavy duty seat post kit is assembled with springs and hardware. The seat post diameter is 1.180".These OEM style seat posts are equipped with the heavy duty color coded spring...

Replica seat post kit is assembled with springs and hardware features a white zinc finish. Seat post diameter is 1.180".Order top clevis pin and bottom nut separately. ...

Zinc seat T clevis pin with spring clip Fits:UL 1937-1948EL 1936-1940FL 1941-1984WL 1929-1952Additional Information UOM1 - KIT

Throttle spark control pin roller collar Fits:FL 1941-1972G 1927-1972K 1952-1956J 1921-1929FX 1971-1972EL 1936-1940WL 1929-1952XL 1957-1972F 1910-1920VL 1930-1936Additional Information

Seat post spacer. Fits:UL 1937-1948WL 1936-1952EL 1936-1940FL 1941-1980Additional Information OEM No.51791-31 <

Special shoulder to mount stock type T bar features a black oxide finish. Fits:UL 1937-1948WL 1936-1952EL 1936-1940FL 1941-1984Additional Information

Original style black seat post is assembled with springs, hex nuts, and spacers. Seat post diameter is 1.180".*NOTE: Standard duty type, holds from 150 up to 220 lbs. Fits:UL 1937-1948EL 1936-1940FL...

Zinc windshield bracket set allows installation of 1949-1959 type windshields on 1960-1984 FL models. Fits:FL 1960-1984Additional Information OEM No.5809

Spring Fork handlebar throttle spiral is push type.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Fits:K 1952-1956FX 1971-1972XL 1954-1970FL 1954-1970Additional Information

Rear connector stud without bushing.Shaft diameter: 3/4" for a 1/2" then steps down to 5/8" for 1-11/16". Fits:FL 1958-1972Additional Information OEM No.

Replica chrome handlebar cross bar kit with clamps, for 1" Spring Fork or early glide handlebars. Fits:FL 1941-1972WL 1939-1952UL 1937-1948EL 1936-1940Additional Information

Black rocker clutch pedal for 1968-1978 FL police models with tank shift. The end of the operating shaft has machined flats to accept the foot clutch rod lever. Fits:FL 1965-1978 Foot...

Chrome foot clutch rod lever. Fits:FL 1965-1984Additional Information OEM No.36816-65A UOM1 - EA

V-Twin - 48-1718 - 1959-1969 FL Factory Service Manual Description Factory style service manual includes detailed Linkert repair and cross reference of old to new numbers for Knucklehead models...

Shovelhead manual set includes a FL and FX service manual, 2 different spare parts books and a complimentary copy of the V-Twin product guide. Fits:FL 1966-1980Additional Information

V-Twin - 48-1382 - Spare Parts Book for 1961-1971 Big Twins Description Spare parts book for 1961-1971 Big Twin provides OEM numbers to help identify exact parts required for application and range...

Service and parts manual for 1948-1965 Panhead and 1966-69 flat side Shovelhead models. Shop book features 739 pages and includes service, parts and dealer tips for the models and years that are...

Factory style manual set consists of 2 volumes covering 1959-68 Panhead and Shovelhead models. Set includes parts catalog and service manual.**NOTE: Product May Not Be Returned. Fits:FL...

Factory style service manual bound books for FL models comes in a set of five.This set features the following bollks: 1958-1965 FLH Parts Manual, 1959-1965 FLH Service Manual, Spare Parts Book for...

Black windshield pouch, with silver edge trim.Mounts to stock 1949-1984 windshields. Fits:FL 1949-1984Additional Information UOM1 - EA <

White windshield pouch, with silver edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM

Black windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information UOM1 - EA Manufacturer

White windshield pouch, with gold edge trim. Fits:FL 1960-1984Additional Information OEM No.58275-63 UOM<

V-Twin - 48-0320 - Factory Service Bulletin for 1957-1969 Big Twins Description The Factory Service Bulletin, VOL. 4, for 1957-1969 Big Twin is a compilation of tips from the factory to the dealers...

V-Twin - Black Buddy Seat Base Plate Bare fits '41-'80 FL Model Bare black metal buddy seat base plate features 8" sew on strips installed. Fitment: FL 1941-1980  

V-Twin - White Leather Solo Seat with Skirt fits '41-'84 FL, '36-'40 EL Models White deluxe solo seat features white skirt, black rosettes and nickel spots. A molded foam pad on an accurate steel...

Black naugahyde covered buddy seat with features a thin profile with a formed steel baseplate.Fastened by pop rivets. Use with a seat tee. Skirt rail not included. *NOTE: Must order mount hardware...

Bates style solo seat kit includes a genuine Bates style tuck and roll leather solo seat and all mount hardware for installation on 1965-1984 FX-FL 4 speed models with a swingarm frame.*Note: UPS may...

Black wheel hub without internals for 1967-1972 Fits:FX 1971-1972 rear onlyFL 1967-1972 front or rearAdditional Information OEM No.43540-67B

Front or rear wheel hub includes bearing, tube, seal, seal spacer, and lock nut. Fits:FX 1971-1972 rear onlyFLH 1967-1972 front or rearAdditional Information

Chrome front 8" dresser hubcap fits in between hub and axle without additional hardware Fits:FL 1967-1972Additional Information OEM No.43304-67

This standard nipple set is 22mm long and is cadmium plated.Set of 40 pieces. Fits:FL 1941-1984Additional Information UOM1 - SET

V-Twin - 44-1996 - Swingarm Pivot Pin with 1 inch Longer PinDescriptionSwingarm pivot pin is 1" longer.Order nut separately. Use with a 5/8" X 18 threads per inch nut. Fits:FX 1971-1984FL...

V-Twin - 44-1958 - Chrome Swingarm Pivot KitDescriptionChrome swingarm pivot kit includes pin, spacers, seals, bearings, races and lock. Fits:FX 1971-1972FL 1958-1972Additional Information

Black swingarm pivot kit includes pin, spacers, seals, bearings, races and lock. Fits:FX 1971-1972FL 1958-1972Additional Information UOM1 - KIT<

Chrome glide front axle kit includes 9-1/8" bearing surface length axle, spacer, nut kit, axle sleeve. Fits:FL 1967-1971 frontAdditional Information OEM No.<

Chrome rear axle kit includes 10-3/4" bearing surface length axle, nuts, sleeves and spacer.This is an 8 piece kit. ...

Wheel hub bearing left hand thread lock nut is for a 1967-1972 wheel hub.Lock nut is manufactured to meet OEM specifications for long lasting durability and performance. Lock nut has a 24 TPI an an...

Zinc rear axle kit includes 10-3/4" bearing surface length axle, nuts, sleeves and spacer.This is an 8 piece kit. ...

Chrome wheel hub retainer cover. Fits:FX 1971-1972 RearFL 1967-1972 Front or RearAdditional Information OEM No.43592-70