Touring Electra Glide Highway King FLHFB

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

V-Twin - 23-1335 - Grate Brake Pedal Pad Large ChromeDescriptionGrate style brake pedal pad is the large type featuring a chrome plated finish. Surface has raised knubs for better grip and...

V-Twin - 23-1334 - Grate Brake Pedal Pad Large BlackDescriptionGrate style brake pedal pad is the large type featuring a black finish. Surface has raised knubs for better grip and self-cleaning...

V-Twin - 23-1328 - Grate Brake Pedal Pad Large BronzeDescriptionGrate style brake pedal pad is the large type featuring a bronze plated finish. Surface has raised knubs for better grip and...

Master cylinder constructed of cast iron and features a natural aluminum finish with an alloy top for Wagner and V-Twin master cylinders.Includes baffle plate as original! ...

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order rubber hose for final connection to the rear wheel cylinder or caliper assembly. ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...

Black cap for filler plug. Fits:FL 1958-1978FX 1971-1978Additional Information OEM No.41765-58 UOM

Brass swivel fitting attaches the brake hose to the back of the wheel cylinder backing plate. Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order the rubber hose for final connection to rear wheel cylinder to caliper separately. ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...

Chrome 5 piece wheel lug set for the front or rear brake drum. Lugs are 3/8" x 20 TPI.*NOTE: Will need a tap brake drum tool for threads. Fits:UL 1937-1948 Front or RearEL 1936-1940 Front or RearFL...

Black rear cast iron brake drum includes riveted sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome rear cast iron brake drum with sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome brake plunger assembly to replace stock components. Fits:FL 1958-1969Additional Information OEM No.41770-58

Chrome non polished Wagner style rear drum master cylinder is assembled with internals and includes cap and boot. Has rough surface with chrome plated finish.Master cylinder is 3/4" bore. Master...

Chrome rear brake pedal without slot. Fits:FL 1958-1969Additional Information UOM1 - EA ManufacturerV

Chrome heavy duty kick starter kit features smooth thick wall kick cover and heavy duty kick starter arm. Kit is partially assembled.Requires the use of a wafer type release bearing kit. Fits:UL...

Includes mount bracket with bushings installed, pedal, spring, cover and all friction components.The clutch pull rod connects to the arm on the pivot shaft. *NOTE: The rod must be ordered separately...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, footpeg, inner lever, instructions and diagram.*Note: UPS may consider this part as...

Replica 4-speed kick starter kit comes partially assembled with the kick starter gear and kick starter shaft assembled into the polished aluminum cover.Ratchet kick starter gear is 16 tooth. Includes...

Daniel Boone shifter kit for the left side on ratchet top 4 speed models. Fits:FL 1941-1984Additional Information UOM1 - KIT

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

Replica kick starter kit features a black removable kick start arm and spring, to fit on shaft. Kit is unassembled.Kit includes natural aluminum kick starter cover with vent. Fits:FL...

Replica kick starter kit features a black removable kick start arm and spring, to fit on shaft. Kit is assembled.Kit includes natural aluminum kick starter cover with vent. Fits:FL...

Chrome heavy duty kit features a smooth thick wall kick starter cover and heavy duty forged "thick" beefy kick starter arm. Kit is as shown, unassembled.Requires the use of a wafer type release...

Chrome rocker style foot clutch assembly is for models with a ratchet top.Includes foot clutch rod lever with offset, rocker pedal assembly, pull rod and clutch arm. For aluminum primary application,...

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST...

Replica shifter control kit includes a black bracket, cadmium rod assembly, zinc inner arm, chrome cover and shift lever.Both inner shifter lever and foot shifter lever are un-splined, as original!...

Hydraulic brake control kit with all zinc plated components.Requires footboard mount kit to install footboards on forward brake kits. Fits:FL 1958-1969Additional Information

Hydraulic brake control kit features all zinc plated components, except the spring which is black.Requires footboard mount kit to install footboards on forward brake kits. Fits:FL 1958-1969Additional...

Includes bracket with bushings installed, pedal, spring cover, rod and all friction components.The clutch pull rod connects to the arm on the pivot shaft. This provides an offset to use with an...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models.Accepts Kelsey...