Touring Electra Glide Police FLHTP

Tour-Pak black replacement latch kit includes front and rear latches and mounting hardware for installation. Comes with catch and spacer plate plus screws.These die-cast latches make access to the...

V-Twin - 49-0887 - Saddlebag Top StrapsDescriptionTop straps for saddlebag. Includes 8 screws.Includes qty 4 pieces 12-16x5/8" self tapping screws (OEM #3596) and 4 pieces 8-32x1/2" stainless truss...

V-Twin - 49-0886 - Saddlebag Lid Wear PlatesDescriptionStainless steel wear plates are for the saddlebag lid. Plates come in a set of four, and require installation with adhesive. Fits:FLT...

V-Twin - 49-0885 - Saddlebag Reinforcing Lid Back Plate SetDescriptionNew Old Stock" Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set.*NOTE: No...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent.Reflector set not included. Plate set is OE style die cast and chrome. They will accept reflector set or flame...

V-Twin - 49-0882 - Original Style Saddlebag Latch SetDescriptionSet includes four plastic rub bars installed and right and left side latches for saddlebag.Order screws and hardware separately...

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information

Hardware kit is for the saddlebag lids.Hardware lid kit does not include locks or face plates. Fits:FLT 1993-2013Additional Information OEM No.9092

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Tour-Pak chrome replacement latch kit includes front and rear latches and mounting hardware for installation. Comes with catch and spacer plate, plus screws for easier mounting.These die-cast latches...

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

Saddlebag filler strip set features a black finish.Right and left side set. Fits:FLT 2009-2013Additional Information OEM No.91614-10

Saddlebag filler strip set features a chrome finish.NOTE: Cannot be used with saddlebag guards with trim rail kit. Right and left side set. Fits:FLT 2009-2013Additional Information

Saddlebag hardware set includes saddlebag backing plate set, stud and hardware kit, top straps, two saddlebag gaskets, and four lower rubber bumpers.Hardware set does not include locks or latch set. ...

Saddlebag hardware kit with left and right latch assembly set, includes bail head studs.Kit includes Touring pack hardware, OE saddlebag hardware, saddlebag lid wear plates, reinforcing lid back...

Flame insert set for Touring saddlebag latch covers replace reflectors.Will replace reflectors on stock latch covers. Order latch covers separately. Face plate is metal and includes an adhesive strip...

V-Twin - 47-1941 - Driver Backrest Pad BlackDescriptionDriver backrest pad is covered in black vinyl for Touring models. Fits:FLT 1997-UPAdditional Information <

V-Twin - 45-0968 - Wheel Hub with 25mm Bearings ChromeDescriptionFront chrome wheel hub with 25mm bearings dual disc models. Fits:FLT 2008-UP Dual disc without ABSAdditional Information

V-Twin - 45-0817 - Front Wheel Hub ChromeDescriptionFront wheel hub features a chrome finish. Fits:FLT 2009-UP with ABSAdditional Information

V-Twin - 45-0813 - Rear Wheel Hub ChromeDescriptionRear wheel hub features a chrome finish. Fits:FLT 2009-UP with ABSAdditional Information

V-Twin - 45-0474 - Chrome Wheel Hub 25mm BearingsDescriptionChrome rear wheel hub with 25mm bearings for 2009-up Touring .Alloy rear hubs has 7/16-14 pulley mount threaded hole and a 3/8-16 brake...

V-Twin - 45-0384 - 16 inch Wire Wheel Cover SetDescription16" wire wheel cover set is for spoked front and rear wheels with alloy hubs. Set includes 2 chrome cover with 4.1" round holes.Covers have...

V-Twin - 44-2062 - Swingarm Pivot Pin NutDescriptionSwingarm pivot pin nut.Thread is M12-1.25. Fits:FLT 2010-UPAdditional Information

V-Twin - 44-2061 - Swingarm Mount Bushing Set RubberDescriptionSwingarm rubber mount bushing set. Fits:FLT 2009-UPAdditional Information

Zinc plated 25mm axle with a hex head and a threaded end, as original, is used to replace a worn out or damaged axle.Axle is precisioned machined with a ground bearing surface. Includes the correct...

V-Twin - 44-1742 - Front Axle Spacer Set ChromeDescriptionChrome front axle spacer set is for use with ABS rear brakes on Touring models with a 25mm axle. Fits:FLT 2008-UPAdditional Information

V-Twin - 44-0999 - Replica Wheel Hub Bearing Kit 25mmDescriptionReplica 25mm rear wheel hub bearing kit for models without anti-lock brake system. Fits:FLT 2009-UP Non-ABSAdditional Information

V-Twin - 44-0982 - Swingarm Mounting KitDescriptionSwingarm mounting kit.*NOTE: Fits M8 models. Fits:FLT 2011-UPAdditional Information

V-Twin - 44-0962 - Wheel Hub Bearing Tube SpacerDescriptionFront or rear wheel hub bearing tube spacer for use on front hub for 2008-up Fits:FLT 2008-UP FrontFLT 2008-2008 RearAdditional Information

V-Twin - 44-0900 - Front or Rear 25mm Wheel BearingDescriptionReplacement wheel bearing for 25mm axle. For use on ABS and non ABS models.Designed for bikes with stock diameter. ...

V-Twin - 44-0883 - Swingarm Bearing SetDescriptionSwingarm bearing set.*NOTE: Replace OEM bearings with stock components. Fits:FLT 2002-UPAdditional Information

V-Twin - 44-0866 - Wheel Hub Bearing Kit 25mmDescription25mm FLT wheel hub bearing kit is for use with ABS models. Fits:FLT 2008-UP Front or RearAdditional Information

FLT rear wheel hub bearing kit is for on non-ABS models and 25mm axle. Fits:FLT 2009-2019 RearAdditional Information OEM No.41456-08C

V-Twin - 44-0858 - Wheel Hub Bearing Tube Spacer 1 inch Inner DiameterDescriptionFront or rear wheel hub bearing tube spacer with an inner diameter of 1". Fits:XL 2005-UPFLT 2002-UP Front and...