Touring Electra Glide Sport FLHS

V-Twin - 31-0776 - Chrome 7 inch Low Boyz Turn Signal Bar KitDescription7" low boyz bar kit chrome is threaded to accept stock rear turn signals and mounts to license plate bracket holes. Fits:FL...

Top motor mount chrome is without the coil mount holes. This engine mount is for Panhead and Shovelhead engines. Fits:FX 1971-1984FL 1948-1984Additional Information

Front engine mount block threads into regulator mount block.This chrome mount block acts as a nut for the front bolts and will mount the regulator. Sold in a quantity of 2. Fits:FXST 1984-1999FLST...

Side mount bracket mounts to stock swingarm and is chrome billet. This bracket will accept vertical or horizontal billet tail lamp assemblies from our selection.Order nut set separately. Fits:XL...

Dual exhaust clamp kit is for FLH models.Order pipe support for 1958-1984 appplications separately. Fits:FL 1970-1984Additional Information UOM1 -

Universal front solo seat mount includes mount and tilt up seat bracket for solo seats. Lower bracket is direct bolt onto FLH frames.The spacing between the hinge lugs measure 1-5/8". The stud thread...

Black one piece design with hardware stock style updated bracket includes nuts welded to bracket to accept cover mount screws and washers which mounts to the existing studs.Order mount studs...

Replica cadmium seat post and T kit includes fully assembled heavy duty cadmium plated post with a forged steel seat T, and related hardware.*Note: UPS may consider this part as packaged "oversize"...

Replica black seat post and T kit includes fully assembled post and forged steel seat T with related hardware.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the...

Replica chrome seat post and T kit includes fully assembled post and forged steel T and related hardware.Stock seat T will work for mounting buddy seats with the use of #31-0177 Front Nose Bracket. ...

Police type solo seat mount kit includes nose bracket, 2" hair pin springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Police type solo seat mount kit includes nose bracket, 2" chrome coil springs and rear mount. Fits:FX 1971-1984FL 1958-1984Additional Information UOM

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT...

Chrome Horn mount bracket. Fits:FLH 1968-1984FL 1968-1984Additional Information OEM No.69131-68 UOM

V-Twin - 31-0517 - Chrome 8-3/4 inch Turn Signal Mount Bar RearDescription8-3/4" chrome bracket is constructed of formed and welded steel which offers the greatest strength against vibration.The...

Replica chrome seat tee includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G...

Solo seat T will mount police and buddy seats to all big twins with seat posts. Fabricated from square solid steel and features a black finish. Does not include bushing.Front spool has 3/8" hole for...

V-Twin - 31-0494 - Chrome 13 inch Turn Signal Mount Bar RearDescription13" chrome bar is constructed of formed and welded steel which offers the greatest strength against vibration.Threaded length on...

Front motor mount frame spacer will allow installation of a Knucklehead or Flathead engine in a 1948-1984 frame.The mount holes measure 3-1/4" center-to-center. *NOTE: The...

Replica black seat T includes 2 stage front bushing and 3/8" bolt.NOTE: 2-stage steel bushings are removable and can be interchanged or replaced as necessary. Fits:FL 1965-1980G 1965-1972Additional...

Billet top motor mount with holes features a chrome finish.The two holes are drilled and tapped 5/16-18UNC with a center distance of 2 Fits:FX 1979-1984FLST 1986-2005FL 1979-1984FXST...

Zinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA

Stanchion only is black for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do no include clamps...

Trumpet horn mount bracket for Shovelhead models. Fits:FL 1966-1984 ShovelheadAdditional Information UOM1 - EA

Stanchion only is chrome for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do not include clamps. ...

V-Twin - 31-0206 - Chrome 12 inch Low Boyz Turn Signal Bar KitDescription12" long chrome low boyz bar is threaded to accept stock turn signals and mounts to license plate bracket holes. Fits:FL...

Chrome steel 90  bend type turn signal mount set is used for front or rear application.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM

Cable guide clip. Fits:FL 1966-1984Additional Information OEM No.45092-66 UOM5 - PK

Battery tray carrier bracket has a chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65 UOM<

Chrome one piece bracket is for mounting spotlamps.The length between the mounting holes measures 13". Fits:FLH 1949-1984Additional Information OEM No.

Chrome bracket set is for front fork triple tree mounting. Set includes right and left sides.The bracket measures 1-1/2" center to center between the two top holes and 6-1/2" between the top and...

Turn signal chrome mounting kit has clamp and mounting bolt included. Kit is necessary for mounting the turn signals below spotlamp unit. Fits:FL 1968-1984Additional Information

Chrome steel flat type mount set for front or rear turn signal.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM No.68527-63

V-Twin - Zinc Plated Buddy Seat Nose Bracket fits '58-'84 FL Model Front nose seat bracket is used to mount buddy seats to mount systems and features a zinc plated finish. Fitment: FL 1958-1984

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome rectifier regulator bracket mount Fits:FL 1976-1984FX 1976-1984Additional Information OEM No.74533-75B

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Speedometer cable guide for front wheel drive models.Sold as a pack of 5. Fits:FX 1973-1984XL 1973-1984FL 1973-1984Additional Information

Chrome starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information OEM No.31476-66

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information