Touring Electra Glide Sport FLHS

Chrome angle fitting for the brake hose to the front master cylinder. Fits:XL 1972-1981FL 1972-1981Additional Information OEM No.43307-78

Front master cylinder plunger assembly hardware only. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM1 - KIT

Wide hand levers are formed to make them easier and more comfortable, for use on big twin models.Set of two. Lever shape is similar to those found on the 1996-up motorcycles. Can be used on 1972-1981...

3/4" handlebar master cylinder rebuild kit includes the plunger hardware. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information UOM

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

Replica chrome clutch lever assembly for 1973-81 models. The clutch lever assembly comes complete with lever bracket, lever, pivot pin and anchor pin.*NOTE: Order switch housings separately. Fits:FL...

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Chrome hand lever is clutch or brake type Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Polished brake hand lever. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Chrome brake hand lever Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information OEM No.45016-72

Smooth chrome handlebar control switch housing.Housing accepts screw in throttle and idle cables. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome vertical switch housing only, will also accepts factory rocker switches and buttons.. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information

Chrome clutch hand lever bracket.Order switch housing separately. Fits:FL 1973-1981FX 1973-1981XL 1973-1981Additional Information OEM No.<

Pivot pin and bushings for hand lever. Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Master cylinder assembly includes the brake lever, stop light switch, reservoir cover and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

Polished handlebar 3/4" bore master cylinder assembly includes the brake lever, stop light switch, reservoir cover, and all internal components assembled. Fits:XL 1972-1981FL 1972-1981FX...

Master cylinder has a 3/4" bore and includes the brake lever, stop light switch, reservoir cover, and all internal components. Fits:XL 1972-1981FL 1972-1981FX 1972-1981Additional Information

1" drag handlebar without indents and without knurls features a black finish with 30  bends. Fits:XL 1974-1981FL 1974-1981FX 1974-1981Additional Information

Cover set is stainless steel and 6-5/8" overall length. Use with 1/4-28 x 5/8" allen socket cap. Mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL...

Tweek bar polished 41mm fork brace is a 2 piece design which clamps directly to fork tube.The distance center to center measures 10". Fits:FXDWG 1999-2005FXWG 1980-1986FXST 1984-2013FLH...

Chrome handlebar riser cover has a hole for steering damper control. Fits:FL 1960-1979Additional Information OEM No.56589-60

Stainless steel fork slider cover set is stock length 6-5/8" and mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information

Cover set is chrome and 6-5/8" overall. Mount holes measure 1/4"x 28 thread.Use with 1/4-20 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Fork assembly 41mm with chrome sliders for single disc applications.Fork assembly 41mm with chrome sliders is single disc model which accepts large banana caliper to accept 10" disc. Assembly...

Stainless steel top triple tree cover has a measurement of 3-1/2" center to center. Fits:FL 1960-1984Additional Information OEM No.45741-60

Cover set is chrome and 6-3/8" overall.Use with 1/4-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

41mm FLH adjustable single disc fork assembly includes polished legs with a black triple tree. Forks uses single disc left side banana caliper and 10" rotor. Fits:FL 1973-1984Additional Information

Set features upper and lower adjustable trees with tabs and bolt.Lower tree has 2 positions for rake, as located by 2 tabs with pins. Includes tabs for slider covers. *NOTE: Order rubber handlebar...

Chrome billet 3  rake ball milled triple tree set includes top nut and has 2 grooves for 41mm fork tubes.Order bearings, cone nut, and dust covers separately. *Note: Can also be...

V-Twin - 24-1964 - 7 inch Headlamp Cowl Kit BlackDescriptionBlack 7" cowl kit available with complete light assembly with rim and includes matching top handlebar cover and Beck bulb.Kit is made out...

V-Twin - 24-1962 - Fork Slider Black Cover SetDescriptionBlack powder coated cover set for the fork sliders are 6-5/8" long. Mount holes measure 1/4"x 28 thread. Fits:FLH 1949-1984Additional...

V-Twin - 24-1960 - 7 inch Headlamp Cowl KitDescriptionBlack powder coated 7" headlamp cowl kit with 55/60 watt H-4 unit. Screws are stainless steel. The cowl and handlebar cover are black powder coat...

Handlebar riser black cover is for the cowl top opening. It has a smooth style finish. Fits:FL 1960-1979Additional Information UOM1 - EA <

1" tapered Spring Fork neck cup is zicad plated. Kit includes Spring Fork shape neck cup, ball bearings, upper and lower races, and chrome top nut with dust cover pressed on.Timken style bearings...

25-1/2" Spring Fork kit is black with chrome springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread...

24" Spring Fork kit is chrome with black springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are...

22" Spring Fork kit is chrome with black springs. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 3/4"...

20" inline Spring Fork kit is chrome with black springs. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes...

18" Spring fork kit features a chrome finish. The top triple tree is a machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread are 1/2" x 20.Includes 1"...

41mm fork assembly includes a natural alloy triple tree set, polished lower legs and hard chrome fork tubes, for a 10" dual disc.Includes a 1" stem and measures 3-1/2" between centers of tubes...