Touring Electra Glide Standard FLHT

Replica 16" x 3.00" rear wheel assembly features 40 chrome spokes, chrome hub with bearings, races, seals, and seal spacers, and a chrome drop center rim with small side valve stem.**NOTE: All spokes...

16" x 3.00" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Replica rear 16" x 3.00" wheel assembly features a chrome drop center rim, chrome hub, and stainless steel spoke set.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

21" x 3.25" Replica dual disc front wheel features wheel hub with 3/4" bearings, chrome rim, and 40 chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Front 16" x 3.5" Duro 26 Fat Spoke wheel features a matte black finish and 25mm bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 3/4" bearings.Wheel will accept dual 11" rotors. Wheel hub includes bearings installed. Wheel can be used with 11" rotors...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Engine mount shim is used to raise motor for front or rear clearance, when necessary.Sold in a pack of 5. Fits:FL 1941-1999EL 1936-1952Additional Information

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Engine bar features 1-1/4" tubing, and 3 point mounting.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

V-Twin - 50-1148 - Zinc Plated Fender BracketDescriptionZinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models.Set of two. Bracket is formed from...

Drag Specialties - DS240210 - Kickstand Leg StopFeaturesReplacement component for chrome kickstandsReplacement Part for OEM Number(s):5001574,5002874Specs

Drag Specialties - 21130212 - AGM Battery - YTX24HLBSFeaturesMSDS Migration DataSpecifically designed for hard-starting, high-performance engines that need extra cranking powerRadial grid technology...

Drag Specialties - 06521475 - High-Efficiency Braided Stainless Steel Clutch Cable - 54-3/4"FeaturesLow effort, maximum efficiency cable design meets or exceeds all OEM specifications for fitment,...

Koso North America - GA030100 - Headlight - LED - ZenithFeaturesDOT and SAE CertifiedBuilt in die-cast housing for a durable and quality productLow beam : 1889 lumensHigh beam : 1557.7 lumensSpecs

Wild 1 - WO575B - 1-1/4" Chubby® Handlebar - FLHT/C - TBW - BlackFeatureswild 1 logoHandlebars are 25% thicker than stockAll bars are precision machined (not swage formed) at control mounts,...

Wild 1 - WO596B - 1-1/4" Chubby® Bagger Handlebar - Hooked - 16" - BlackFeatureswild 1 logoHandlebars are 25% thicker than stockAll bars are precision machined (not swage formed) at control mounts,...

Wild 1 - WO590B - 1-1/4" Chubby® Bagger Handlebar - Hooked - 10" - BlackFeatureswild 1 logoHandlebars are 25% thicker than stockAll bars are precision machined (not swage formed) at control mounts,...

S&S Cycle - 93-4070 - Pushrod Cover Keeper Set - Chrome - 2.400"FeaturesFor use in custom applications where stock keepers won't fitChromed steel finishSold in kits of four assemblies; enough for one...

S&S Cycle - 93-4115 - Pushrod Cover Keeper Set - Chrome - 2.800"FeaturesFor use in custom applications where stock keepers won't fitChromed steel finishSold in kits of four assemblies; enough for one...

S&S Cycle - 93-4106 - Pushrod Cover Keeper Set - Chrome - 3.330"FeaturesFor use in custom applications where stock keepers won't fitChromed steel finishSold in kits of four assemblies; enough for one...

S&S Cycle - 34-4040 - Race Bearing Set - Big TwinFeaturesUsed to rebuild S&S and stock connecting rodsIncludes hardened steel rod bearing races and bronze wrist pin bushingsRequires finish sizing...

Parts Unlimited - Battery - Y50-N18L-AFeaturesMSDS Migration DataPowerful starting power at a great priceParts Unlimited Heavy-Duty batteries are built to the same exacting specifications and...

Power Max - GIX50L-BS - Battery - Y50N18L-AFeaturesMSDS Migration DataMSDS Migration DataCompletely sealed black case can be mounted in almost any positionAdvanced technology allows very high power...

Lang Tools - 9794 - Wrench - Crankshaft - 10 Spline - RatchetingFeaturesUsed for rotation of the crankshaft/check engine timing and parts clearance on Sportster® motorcyclesEZ Grip screwdriver-style...

Klock Werks - KWFS-01-0101 - WFB Benchmark Bagger Front Fender Blocks - For all 23"/26" Tire Hugger/Benchmark - SatinFeaturesMachined from billet aluminumLess is more in this minimalist part that...

Klock Werks - KWFS-01-0100-C - WFB Benchmark Bagger Front Fender Blocks - For all 23"/26" Tire Hugger/Benchmark - ChromeFeaturesMachined from billet aluminumLess is more in this minimalist part that...

Klock Werks - KWF-01-0261 - Shank Front Fender Kit - For Raked Frames - Black - Steel - 26"FeaturesSteel fenders are thick enough to add rigidity to the front end by acting like a fork brace, but can...

Klock Werks - KWF-01-0251 - Slicer Front Fender Kit - For Raked Frames - Black - Steel - 26"FeaturesSteel fenders are thick enough to add rigidity to the front end by acting like a fork brace, but...

Klock Werks - KWF-01-0250 - Level Front Fender Kit - For Raked Frames - Black - Steel - 26"FeaturesSteel fenders are thick enough to add rigidity to the front end by acting like a fork brace, but can...

Kibblewhite - 10-HC446 - Valve SeatFeaturesCopper-based material designed specifically for use with titanium valves in high performance applicationsGive the seat excellent thermal characteristics as...

Klock Werks - KWF-01-0259 - WFB™ Benchmark Front Fender - Steel - Black - For Raked Trees - 23"FeaturesStamped from 14-gauge U.S. steel, these 6-1/2" wide fenders are E-coated to prevent rust and...

Kibblewhite - 71045-4 - Valve Stem SealsFeaturesFor use with intake and exhaust valve guidesRetain their ability to seal in adverse conditionsPTFE seals feature a metal jacket with choker springMade...