Touring Electra Glide Ultra Classic FLHTCU

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

Saddlebag hardware set includes saddlebag backing plate set, stud and hardware kit, top straps, two saddlebag gaskets, and four lower rubber bumpers.Hardware set does not include locks or latch set. ...

Saddlebag hardware kit with left and right latch assembly set, includes bail head studs.Kit includes Touring pack hardware, OE saddlebag hardware, saddlebag lid wear plates, reinforcing lid back...

V-Twin - 49-0000 - Saddlebag LED Lamp KitDescriptionSaddlebag lamp kit includes a set of red LED lamps with red lens and the Touring electrical connection update kit.Harness included. *NOTE: Does not...

Flame insert set for Touring saddlebag latch covers replace reflectors.Will replace reflectors on stock latch covers. Order latch covers separately. Face plate is metal and includes an adhesive strip...

V-Twin - 47-1941 - Driver Backrest Pad BlackDescriptionDriver backrest pad is covered in black vinyl for Touring models. Fits:FLT 1997-UPAdditional Information <

V-Twin - 46-0310 - Dunlop D402 Rear Tire MT90HB X 16 inch BlackwallDescriptionThis rear blackwall tire features a new tread pattern.The new tread pattern emphasizes better wet traction and increased...

V-Twin - 45-0819 - Nickel Plated 16 inch Spoke SetDescriptionFront or rear spoke set features (40) 16" nickel plated spokes and nipples. Spokes are easy to clean and maintain. Spoke set include...

V-Twin - 45-0409 - Polished Stainless Steel 16 inch Spoke SetDescriptionPolished stainless steel spoke set features 40 short shank spokes and spoke nipples.The spokes are easy to clean and maintain...

V-Twin - 45-0384 - 16 inch Wire Wheel Cover SetDescription16" wire wheel cover set is for spoked front and rear wheels with alloy hubs. Set includes 2 chrome cover with 4.1" round holes.Covers have...

Chrome front wheel hub includes installed 1" sealed bearings and bearing spacer. Fits:FLT 2000-2007 Dual DiscAdditional Information OEM No.40988-00<

V-Twin - 45-0333 - Chrome Rear Wheel Hub 1 inch BearingsDescriptionIncludes sealed 1" bearings and inner tube spacer.Alloy rear hubs has 7/16-14 pulley mount threaded hole and a 3/8-16 brake disc...

Includes sealed 3/4" bearings and inner spacer tube.Alloy rear hubs has 7/16-14 pulley mount threaded hole and a 3/8-16 brake disc mount threaded hole. The distance between the mounting flanges are...

V-Twin - 44-2064 - Swingarm ISO Mount Pin KitDescriptionIso mount swingarm pin kit includes pin, and outer support bushings with steel face plates for upgrades.. Fits:FLT 1993-2002Additional...

V-Twin - 44-2063 - Swingarm ISO Mount Pin KitDescriptionISO mount swingarm pin kit includes pin, isolation sleeves and side bushings, nuts and washers.Isolator sleeves are offset and measure 1-1/4"...

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2044 - Swingarm Rebuild KitDescriptionKit includes two bushing assemblies, spacers, plastic retainer rings, plastic dust covers, rubber isolators, and one pivot shaft with lock nut and...

V-Twin - 44-2041 - Swingarm Pivot Washer NylonDescriptionNylon swingarm pivot washer. Fits:FXR 1987-1994FLT 1987-2001Additional Information

V-Twin - 44-2040 - Swingarm SpacerDescriptionSwingarm spacer. Fits:FXR 1987-1994FLT 1987-2001Additional Information OEM

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-1991 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft includes steel spacers. Fits:FLT 1989-2001FXR 1989-1994Additional Information

Wheel hub bearing set has an inner diameter of 3/4".Sold as a set of 2. Fits:XL 2000-2004 RearFLST 2000-2006 FrontFXDWG 2000-2005 Front or RearFXST 2000-2006 FrontFXST 2000-2007 RearFXD 2000-2003...

Replica front or rear wheel hub 1" bearing kit. For use with non-ABS models. Fits:FLT 2000-2007Additional Information OEM No.43517-00

Rear axle adjuster set features a zinc finish. Fits:FLT 1997-2001XL 1997-2004Additional Information OEM No.41112-79

Front or rear hub bearing rebuild kit includes all internal parts including longest length inner spacer which is 4.4480" long.The inner spacer can be cut down or you can remove the collar for certain...

Axle with threaded end has a 10-3/4" bearing surface length and can be used to replace a worn out or damaged axle. Fits:FLT 2000-2007Additional Information OEM No

Front or rear wheel hub bearing tube spacer with 3/4" inner diameter.May be used in some cast mag wheel applications when flange is removed. For front use on FXWG and for rear use on FXST model...

V-Twin - 44-0297 - 1984-1986 FXWG Front Axle Spacer 3/4 inch Inner DiameterDescriptionZinc front axle spacer has an inner diameter of 3/4" and fit the right side. Spacers overall length is 1-1/4"...

V-Twin - 44-0250 - Chrome Rear Axle Adjuster Cap Set Pyramid StyleDescriptionDie cast chrome pyramid end caps for use with stock type pull adjusters.Inside thread of bolt set measures 3/8"x16...

1" rear axle kit includes a 12-1/2" bearing surface length axle with an outer diameter of 3/4", and spacer nut. Fits:FLT 2000-2001Additional Information UOM<

Zinc rear axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. The axle features a 1" diameter with 5/8"-18 threads. Fits:XL...

Axle with hex head and threaded end has a 11-1/4" bearing surface length and can be used to replace a worn out or damaged axle. The axle features a 3/4" diameter with 5/8"-18 threads. Fits:XL...

FLT chrome smoothie spacer set for use on front axle and has a 1" inner diameter x 1" overall length. Fits:FLT 2000-2007 Front FitmentAdditional Information

Swingarm bushing set includes two of each: mount bushing rubbers, tolerance rings and retaining rings.Sold as a 6 piece set. Fits:FLT 1980-2001FXR 1983-1994Additional Information