Touring Road King Classic FLHRC

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

V-Twin - 53-0913 - East Penn AGM BatteryDescriptionBattery features Absorbed Glass Mat technology. Fits:FLT 1997-UPAdditional Information

Dry charged 12 volt battery and requires filling with electrolyte acid available from your local auto parts store.Not maintenance free. Battery is shipped dry without acid. Battery is lead/acid type...

V-Twin - 52-2008 - 16 inch x 3.00 inch Front Wheel AssemblyDescriptionFront 3.00" X 16" dual disc wheel has 40 spokes, hub, rim and features a chrome finish. Hub comes with 1" bearings. The rim is a...

V-Twin - 52-1291 - 23 inch x 3.0 Drop Center Chrome Wheel RimDescriptionFront 23" chrome drop center rim has an outside width of 3.0" with 2 flat flanges and 40 holes.The outside width measures 3.65"...

Rear 16" x 4.00" wheel assembly with chrome rim, 40 spoke style chrome hub with 3/4" bearings, and polished stainless steel spokes.**NOTE: All spokes on wheel need to be inspected and re-torqued...

Rear 16" x 3.00" wheel assembly with chrome rim, 40 spoke style chrome hub with 3/4" bearings, and polished stainless steel spokes.Wheel is tube type. ...

Rear 16" x 4.00" wheel assembly with chrome rim, 40 spoke style chrome hub with 3/4" bearings, and chrome spokes.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of...

Rear 16" x 3.00" wheel assembly with chrome rim, 40 spoke style chrome hub with 3/4" bearings, and chrome spokes.Flat part of flange width on pulley side measures 1-3/16" and on brake side measures...

Rear 16" x 3.00" wheel assembly with black rim, 40 spoke style chrome hub with 3/4" bearings, and chrome spokes.Flat part of flange width on pulley side measures 1-3/16" and on brake side measures...

16" x 3.00" rear wheel include chrome hub with internals, rim and 40 twirled spokes assembled.**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation...

Front 23" x 3.00" dual disc wheel assembly features a chrome hub with all internals bearings installed, spokes, and a chrome rim laced and trued.Use with a 130/60R tire and 130/60 tube. *Note: UPS...

21" x 3.25" Replica dual disc front wheel features wheel hub with 1" bearings, chrome rim, and 40 spokes laced and trued.NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles...

Wheel features 16" x 3.5" chrome rim, a chrome hub with 3/4" bearings and internals and 40 stainless spokes.Wheel is laced and trued. For use on models with a 3/4" axle. **NOTE: All...

Wheel features a 16" x 3.5" chrome rim, a chrome hub with internals and 3/4" bearings and 40 chrome spokes.Wheel is laced and trued. For use on models with a 3/4" axle. **NOTE: All spokes...

Front 16" x 3.5" Duro 36 Fat Spoke wheel features a matte black finish and 1" bearings. Accepts dual 11" rotors.Wheel bearing adapter sleeve sets, available separately. *NOTE: The rim width is 109mm...

Front 21" x 3.15" Duro 36 Fat Spoke cast type wheel is dual disc, and features a matte black finish with 25mm bearings.Wheel bearing adapter sleeve sets, available separately. ...

Touring torque linkage system features a black finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Touring torque linkage system features a chrome finish and will fit all Touring models with no modifications necessary to install unit.This unit will eliminate the lateral movement while still...

Nerf engine bar features a black finish and is manufactured with 1-1/2" steel tubes. Engine bar is for Touring models and can only be mounted by bolts. Engine bar will not fit Police models. Fits:FLT...

Nerf engine bar features a chrome finish and is manufactured with 1-1/2" steel tubes.Engine bar is for Touring models and can only be mounted by bolts. ...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the separate pruchase of OEM #90781-93 Lower...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Bar complements the traditional Touring style and features 1-1/2" diameter tubing.**WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances...

Front engine bar features a black finish.Does not fit models equipped with fairing lowers. Fits:FLT 1997-2008 except Road GlideAdditional Information UOM

Rear engine bar set with black finish. Set includes saddle bag supports, left and right guards, and hardware to replace the under the saddlebag support with loop style saddlebag guards for a...

Chrome left and right pivot mount end caps with footpeg mount holes.The OEM number for the right end cap is 50589-93, and the OEM number for the left end cap is 50588-93. Fits:FLT 1982-1984FLT...

Chrome engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Engine bar set features left and right sides with 1-1/4" tubing. For use with stock type saddle bag supports.2004-08 FLTR, FLHX, FLHRS models requires the seperate purchase of OEM #90781-93 Lower...

Rear frame set bar features left and right sides with 7/8" tubing.The stock shape reflectors are not included. *NOTE: Not for use with saddlebag rails. **WARNING: This frame bar may provide limited...

Bar complements the traditional Touring style and features 1-1/4" tubing.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over...

Black engine bar features integrated rubber pads for foot rests.WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while...

Passenger footboard set with swingarm mount kit includes streamline style mini footboards.A Wyatt Gatling patch is included in the kit. Installation will require re-installation of the original...

Chrome swingarm mount kit includes right & left side chrome pivot caps, passenger footboard mounts and passenger footboard with rubber pads.Installation will require re-installation of the original...

Profile frame bar set features left and right sides with 7/8" chrome plated tubing. For use with stock type saddlebag supports.The unique shape of these guards gives the passenger more leg room. Not...

Mid control mount kit is used to mount to the two holes located in the lower frame brace. Kit features a black finish.Mount features holes on each side for the left and right foot brake peg mount...

Fairing air deflector set with dark smoke tint reduces draft behind the fairing.Designed to deflect air away from the driver's elbow and upper torso. *NOTE: The mounting hardware must be ordered...

Beaded windshield is 21-3/4" tall and is for 1967-2010 Sidecars.Installation hardware not included, must be ordered separately. There are 5 mount holes altogether. Fits:FLT 1987-2010Additional...

V-Twin - 50-2082 - Detachable Passenger Backrest Sissy Bar ChromeDescriptionDetachable passenger backrest sissy bar features a chrome finish. Fits:FLHT 1997-2008FLHR 1997-2008FLHX 1997-2008FLTR...