Touring Road King Classic FLHRC

Set includes four bail head studs, four washers, four grommets, four receptacles, and four mounts for the left and right side for mounting saddlebags.Does not include the lid hardware or latch plates...

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set.. Fits:FLT 1993-2013Additional Information

Hardware kit is for the saddlebag lids.Hardware lid kit does not include locks or face plates. Fits:FLT 1993-2013Additional Information OEM No.9092

Chrome heavy duty construction is 15% thicker than stock steel brackets for added support to prevent breakage. Constructed of forged aluminum, machined, and full chrome plated pieces.Mounts with...

Front trim style speaker grill set features a chrome finish with a cross bar design.Sold as a set of 2. Fits:FLT 1996-2013Additional Information UOM

Saddle bag lock and key kit includes 2 key and 2 locks.Kit includes 2 x 90682-93 Cam Hooks and 2 x 7586 Jam Nuts 9/32-28 x 1/4. Fits:FLT 1993-2013FLHT 1993-2013Additional Information

Saddlebag Lock and key kit includes 2 locks and 2 keys, 2 cam hooks, 2 9/32 x 28 x 1/4 jam nuts, 2 8# x 32 x 3/8 screws, and right and left side plastic rub bars. Each lock is keyed different.All...

Saddlebag liner kit for stretched saddlebags features felt material.Customer may opt to use velcro strips to better secure liners inside of saddlebags. (Velcro not included.) Fits:FLT...

Chrome heavy duty construction is reinforced and 15% thicker than stock for added support to prevent breakage.Mounts with reinforced stock hardware. Fits:FLT 1979-2013Additional Information

Saddlebag lid set includes right and left side lids with speaker cutout. Lids are plastic with a primed finish, ready for paint.The speaker cutout measures 7.5" x 5-1/4". Pre-drilled and pre-fit for...

Saddlebag hardware set includes saddlebag backing plate set, stud and hardware kit, top straps, two saddlebag gaskets, and four lower rubber bumpers.Hardware set does not include locks or latch set. ...

Saddlebag hardware kit with left and right latch assembly set, includes bail head studs.Kit includes Touring pack hardware, OE saddlebag hardware, saddlebag lid wear plates, reinforcing lid back...

V-Twin - 49-0000 - Saddlebag LED Lamp KitDescriptionSaddlebag lamp kit includes a set of red LED lamps with red lens and the Touring electrical connection update kit.Harness included. *NOTE: Does not...

Flame insert set for Touring saddlebag latch covers replace reflectors.Will replace reflectors on stock latch covers. Order latch covers separately. Face plate is metal and includes an adhesive strip...

V-Twin - 48-0424 - Chrome Fork Lock CoverDescriptionChrome fork lock cover pivots to allow access to fork lock. Fits:FLHR 1994-UPAdditional Information

V-Twin - 47-1941 - Driver Backrest Pad BlackDescriptionDriver backrest pad is covered in black vinyl for Touring models. Fits:FLT 1997-UPAdditional Information <

V-Twin - 46-0310 - Dunlop D402 Rear Tire MT90HB X 16 inch BlackwallDescriptionThis rear blackwall tire features a new tread pattern.The new tread pattern emphasizes better wet traction and increased...

V-Twin - 45-0819 - Nickel Plated 16 inch Spoke SetDescriptionFront or rear spoke set features (40) 16" nickel plated spokes and nipples. Spokes are easy to clean and maintain. Spoke set include...

V-Twin - 45-0409 - Polished Stainless Steel 16 inch Spoke SetDescriptionPolished stainless steel spoke set features 40 short shank spokes and spoke nipples.The spokes are easy to clean and maintain...

Chrome front wheel hub includes 3/4" bearings installed, races, seals and seal spacers. Fits:FLT 1984-1999Additional Information OEM No.43404-87

V-Twin - 44-2064 - Swingarm ISO Mount Pin KitDescriptionIso mount swingarm pin kit includes pin, and outer support bushings with steel face plates for upgrades.. Fits:FLT 1993-2002Additional...

V-Twin - 44-2063 - Swingarm ISO Mount Pin KitDescriptionISO mount swingarm pin kit includes pin, isolation sleeves and side bushings, nuts and washers.Isolator sleeves are offset and measure 1-1/4"...

V-Twin - 44-2060 - Swingarm KitDescriptionKit includes 2 offset steel bushings and 2 alloy washers. Fits:FLT 1980-2006FL 1980-2006FLHTC 1980-2006Additional Information

V-Twin - 44-2044 - Swingarm Rebuild KitDescriptionKit includes two bushing assemblies, spacers, plastic retainer rings, plastic dust covers, rubber isolators, and one pivot shaft with lock nut and...

V-Twin - 44-2041 - Swingarm Pivot Washer NylonDescriptionNylon swingarm pivot washer. Fits:FXR 1987-1994FLT 1987-2001Additional Information

V-Twin - 44-2040 - Swingarm SpacerDescriptionSwingarm spacer. Fits:FXR 1987-1994FLT 1987-2001Additional Information OEM

V-Twin - 44-2039 - Swingarm Retaining Ring PlasticDescriptionPlastic swingarm retaining ring. Fits:FXR 1987-1994FLT 1980-2001Additional Information

V-Twin - 44-2029 - Wheel Hub Bearing Shim .008 ThickDescriptionWheel hub bearing shim is .008 thick. Fits:FLT 1982-1999Additional Information

V-Twin - 44-2027 - Front Wheel Hub Bearing Shim .032 ThickDescriptionWheel hub bearing shim is .032 thick. Fits:FXR 1982-1994FLT 1979-1999Additional Information

V-Twin - 44-2026 - Wheel Hub Bearing Tube SpacerDescriptionWheel hub bearing tube spacer. Fits:FLT 1982-1999Additional Information

V-Twin - 44-1991 - Swingarm Pivot ShaftDescriptionSwingarm pivot shaft includes steel spacers. Fits:FLT 1989-2001FXR 1989-1994Additional Information

V-Twin - 44-1976 - Wheel Hub Bearing and Seal KitDescriptionWheel hub bearing and seal kit is a deluxe kit which includes 2 of each type of seal and 2 tapered bearings. Also used for swingarm...

Chrome rear axle spacer set features 3/4" inner diameter with an overall length of 1-5/8".Axle spacer fits right and left side on 1986-1999 Touring models. Fits:FLT 1986-1999Additional Information

Axle with threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Includes spacers and nut. Fits:FXST 1985-2006FLST 1986-2006FLT 1980-1984FLT...

Rear axle adjuster set features a zinc finish. Fits:FLT 1997-2001XL 1997-2004Additional Information OEM No.41112-79

Assembly includes 2 of each bearing, race, seal and one seal spacer.Order snap rings, seal washer and internal bearing spacers separately. Fits:FLT 1984-1999 steel hub, wire wheelFXST 1986-1999 steel...

Chrome 3/4" axle with hex head and threaded end has a 12-1/2" bearing surface length and can be used to replace a worn out or damaged axle. Axle features a chrome finish.Does not have hole for cotter...

V-Twin - 44-0427 - Rear Axle Spacer 3/4 inch Inner DiameterDescriptionChrome rear axle spacer has an overall length 3/4". Fits:FLT 1987-1999FXR 1987-1994XL 1986-UPFXST 1987-1999Additional Information

Bearing kit includes two tapered bearings and two races.Bearing is a 1 piece pressed steel cage that retains rollers on the cone and spaces them evenly. Fits:FXD 1991-1999 Front and RearFL 1973-1984...

Rear wheel hub bearing race and seal kit includes two each of bearing, race, and proper seals. Fits:FXD 1991-1999 Front and RearFL 1973-1984 Front and RearFLT 1986-1999 RearXL 1979-1999 RearFX...