Yamaha XS 650 Parts

V-Twin Round LED Tail Light - Black w/ Red Len This Bates Style LED tail lamp features a black housing with a red plastic lens. Features: LED round tail lamp is black with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4"...

TC Bros Choppers - 33 Ford Replica Tail Light License Plate Bracket This is the most versatile bracket on the market! Unique modular design allows bracket to be mounted horizontally or vertically on either the left or right side of the bike. 3...

Universal Linkage Kit for all TC Bros Choppers forward control and rearset kits. The rods and tubes will need to be cut to fit your own application. KIT INCLUDES: Two 24'' Long 5/16" Threaded Rods Four 5/16" Ball Joints Two 5/16" ID x 1/2" OD...

Biltwell Recoil Grips for 7/8 Inch Handlebars Biltwell's Recoil Grips are made from Krayton rubber, that's the same stuff the BMX and Dirtbike grips you grew up with are made of. These grips will wear quicker than a conventional handlebar grip...

Biltwell Solo 2 Seat - Diamond Stitched Features: 1/8" thick stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte...

Magnum BYO Universal Brake Lines Inverted Flare Fittings The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you cant...

Motorcycle Supply Co Bezel 5" Headlight Black Headlight with amber lens and 5" bezel Specs: Black Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

The EMGO Flat Track High bars are great for racing or street trackers. There made from carbon steel and available in Chrome or Gloss Black. Measurements: End Rise: 6" Width: 32.5" Center Width: 5" Pullback: 7"

TC Bros. Choppers brake anchor rod is designed specifically for the Yamaha XS650 but will work with many different models. Length is adjustable from 9.5 inches to 10.25 inches center to center of rod ends. Kit includes: Brake anchor rod Mild steel...

V-Twin Axed Alien Gas Tank - 2.2 Gallon This V-Twin Gas Tank has a right side 1/4" NPT Petcock opening. It features a fuel capacity of 2.2 gallons. The tank uses a Bayonet Style Gas Cap, and has front and rear mount tabs. This gas tank works great on...

V-Twin Smooth Solo Seat - Thick Bates style solo seat made of black vinyl. Center to center measurement on spring mount studs for front is 4-1/4" and for rear is 7-1/8". Measurements: Length: 12-1/2" Back Width: 9-1/2" Thickness: 4cm Middle...

Biltwell Tracker Mid Handlebars 7/8" Biltwell has done it again- these low profile Tracker Handlebars look great on just about any motorcycle! Choose from chrome or black, smooth or dimpled depending on what you ride. These are even lower than most...

Magnum BYO Universal Brake Lines Junction Block The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you cant find the...

The EMGO Universal Street Handlebars are high quality carbon steel bars. Designed to fit most riding positions. Width 32" Rise 3.25" Center width 5.5" Pullback 3.75"

Motorcycle Supply Co Bezel 5" Black Headlight - Clear Lens Black housing with clear lens and 5" bezel Specs: Black Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

V-Twin - Invader Grilled Tail Light Assembly This Invader Grilled tail lamp has a red lens and chromed housing. Dimensions: Center to center of bracket holes 4"-3/8 4" wide 5" tall Fitment: Custom Applications

Biltwell Slimline Seat - Diamond Stitched The Biltwell Slimline Solo Seat is the perfect no-frills solo seat for your custom motorcycle. It does require basic fabrication skills to install, as it will require a seat hinge, seat springs, and mounting...

EMGO Shorty Muffler Chrome The Emgo Shorty Muffler is a simple looking muffler. The perfect addition to your motorcycle if you're looking for something subtle and classic. This universal muffler can be mounted to either the left or right side of your...

Motorcycle Supply Co. - Chrome 5-¾" Headlight - Amber Lens This Motorcycle Supply Co. headlight is a Bates style headlamp designed for use on motorcycles. It has a chrome housing and an amber lens, and it uses a 12V H4 bulb. The headlight has a...

V-twin black vinyl solo seat features a metal base-plate which includes studs for mounting springs and nose brackets. Order mount kits and nose T bracket separately. The two spring studs under the solo seat measure 3-1/8" center-to-center in the front...

Biltwell Solo Seat Black Diamond Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the frame,...

Magnum BYO Universal Brake Lines With Vise Wrench The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you cant find...

V-Twin LED Tail Light - Chrome w/ Red Lens LED round tail lamp is chrome with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long. Does not have license plate light provisions. Fitment: Custom...

Biltwell Slimline Black Tuck N Roll Solo Seat Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the...

Motorcycle Supply Co Unity 5" Copper Headlight This 5" chopper/ bobber headlight will add a custom look to your motorcycle. Specs: Copper Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications

V-Twin Rear Fender Brace Set for Rigid - Chrome Mount brace set allows any width fender to be bolted to these bars. Fender brace is for rigid frames. Features:   Set of two Braces are 9-1/2" long chrome finish Mount holes measure 5/16" in diameter...

The Emgo GT Grips have a old-school look with some extra comfort For 7/8" bars 5 1/4" in length Sold in Pairs

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End to end of mounting tabs measures 19-7/8 Accepts 3/8"...

Motorcycle Supply Co. - Bezel 5" Chrome Headlight - Amber Lens This headlight has a 5" bezel, chrome housing and clear lens. Specs: Chrome Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

Motorcycle Supply Co. - Black 5-¾" Headlight - Amber Lens This Motorcycle Supply Co. headlight is a Bates style headlamp designed for use on motorcycles. It has a black housing and an amber lens, and it uses a 12V H4 bulb. The headlight has a...

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

The EMGO Ape Hanger Handlebars are high quality carbon steel bars. Width 32" Rise 14" Pullback 7 1/2" Center Width 5 1/2"

V-Twin 4" Headlight - Chrome w/ Clear Lens Features: Chrome 4" bottom mount deco headlamp features a longer tapered shell with a 12 volt 60/55 watt H-4 bulb. Includes mount block and stud. Headlamp does not have a hi-beam indicator. Fitment: Custom...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

The Emgo Jack Hammer Grips can go on any style bars. They have a classic look featuring ribs along the length of the grip. For 7/8 bars Sold in Pairs

Magnum BYO Universal Brake Lines Banjo Fitting Vise Wrench The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you...

V-Twin Steel Rear Fender 6" Round Profile - Raw Smooth round profile chopper fender has a thickness of 1.05 mm. Fits: Custom application

The EMGO Daytona Handlebars are high quality carbon steel bars. Desinged for comfortable riding position Width 29" Rise 4" Center width 4.5" Pullback 6.5"

The EMGO Scrambles handlebars are great for racing or street trackers. There made from carbon steel and available in Chrome or Gloss Black. Measurements: End Rise: 4.5" Width: 31.75" Center Width: 5.25" Pullback: 5.75"

Motorcycle Supply Co Unity 5" Copper Headlight This chopper/bobber headlight will add a unique custom look to your bike. Specs: Copper Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications