Electra Glide FLFB

1/4"-24 lifter base hex screw featuring a chrome finish with stock lifter blocks. Tapered head screw for early type lifter blocks. Fits:FL 1941-1975EL 1936-1952Additional Information

Transmission engine hex drain plug 1/2" X 13 thread, zinc. Fits:XL 1957-1976 Engine and TransmissionFL 1941-1984 TransmissionFX 1971-1984 TransmissionAdditional Information

The magnetic drain plug prevents metal particles from circulating through the transmission. And the drain plug washer is constructed of brass.*NOTE: Plug is 1/2"-13 UNC. Fits:FL 1941-1985Additional...

Four piece solid tappet adapter kit replaces hydraulic tappet inserts. Fits:FLT 1979-1983FX 1971-1984FXR 1982-1983FL 1953-1984Additional Information

Front axle nut kit include sleeve nut, castle nuts and cotter pins. Fits:UL 1937-1948FL 1941-1971EL 1936-1940G 1930-1971Additional Information

Zinc rear nut and lock kit for 1930-1972 Big Twin. Kit includes sleeve nut, collar, axle nut, and lock clip. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940VL 1930-1936Additional Information

Rear axle nut and lock kit, chrome fits 1930-1972 Big Twin Kit includes sleeve nut, collar, axle nut and lock clip. Fits:FL 1941-1972UL 1937-1948FX 1971-1972EL 1936-1940VL 1930-1936Additional...

Zinc slot type transmission top cover screw kit contains stock fasteners and special vent screw. Fits:UL 1937-1948FL 1941-1978FX 1971-1978EL 1936-1940Additional Information

Motor case drain/oil pump body plug has a zinc finish. Fits: UL 1937-1948 Case F 1911-1920 Case J 1921-1929 Case FL 1968-1984 Oil pump FX 1971-1984 Oil pump EL 1936-1940 Case VL 1930-1936...

Chrome hex stock type kit includes nuts and washers for the transmission side cover and clutch arm. Fits:UL 1937-1948FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Zinc plated cylinder base nut stock set includes 8 nuts with washers. Fits:FX 1971-1977EL 1936-1940FL 1941-1977Additional Information UOM

Zinc plated cylinder base nut stock set includes 8 nuts with washers. Fits:FX 1971-1977EL 1936-1940FL 1941-1977Additional Information UOM

Stock headbolt kit with washers features a zinc finish. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - KIT

Rear chain adjuster features a parkerized finish.Chain adjuster features a 3/8 - 24 thread with a hex head. Fits:FL 1941-1972UL 1937-1948EL 1936-1940Additional Information

V-Twin - 7508-20T - Chrome Pushrod Cover and Clip KitDescriptionChrome pushrod cover and clip kit includes 4 clips and cups, seals, springs and cork washers. Fits:FXST 1984-UPFL 1940-1947FXD...

V-Twin - 7506-4 - Solid Shovelhead Pushrod SetDescriptionSolid shovelhead pushrod set is alloy construction with hardened steel ends tips.For use with solid tappets with build in adjusters and lock...

Retainer and seal kit for the sprocket shaft Fits:FL 1955-1968Additional Information UOM1 - EA Manufacturer

Frame and rork kit includes straight leg rigid frame, a 1" overstock inline black spring fork and an inline Spring Fork handlebar. The 1" compliments the 30  frame. Assembly accepts Shovelhead or...

Shock stud kit includes all pieces for upper and lower positions. Kit includes washers, nuts, & studs. Has stud for 5/8" shock eyelet. Fits:FL 1965-1966Additional Information

Zinc stock stud spacers replace 5960W on 1965-1985 FLH when rear frame bars are not used. Fits:FL 1965-1984Additional Information OEM No.5960W

Zinc Nyloc shock stud nut is 5/8-18 UNC thread. Fits:XL 1957-1974KH 1954-1956FX 1971-1984FL 1958-1984Additional Information OEM No.

V-Twin - 54-0421 - Chrome Shock Stud Washers 1/2 inch HoleDescriptionChrome 1/2" hole x 1" flat shock stud washers Fits:FLT 1997-UPFXR 1982-1994FL 1965-1984FX 1971-1984XL 1975-UPFXD...

Chrome 1/2" hole cup shock stud washers Fits:FL 1965-1984FX 1971-1984XLH 1972-1974Additional Information OEM No.54545-65

Chrome 3/8" hole cup shock stud washers Fits:FX 1971-1984XLH 1972-1974FL 1965-1972Additional Information OEM No.54543-65

Chrome 5/8" hole cup shock stud washers Fits:XLH 1965-1974FX 1971-1972FL 1965-1972Additional Information UOM10 - PK

H-12 battery cast is plastic as original battery, with a removable top. Kit features a mock plastic top that will house most smaller batteries and mounts like an original battery.Mock battery box is...

H-12 battery top cover with terminals. Fits:FL 1965-1984XL 1967-1978Additional Information UOM1 - EA

Battery top set is a six piece set. Fits:FL 1965-1984Additional Information UOM6 - SET ManufacturerV-

V-Twin - 53-0501 - 12 Volt AGM H-12 Sealed Battery BlackDescriptionAbsorbed Glass Mat technology proposes the best balance between cold cranking amps and amp hour capacity.AGM battery is fully sealed...

V-Twin - 52-2047 - 16 inch x 3.00 inch Replica Front or Rear Spoke WheelDescriptionReplica front or rear 16 x 3.00" star hub type wheel include a black hub, chrome rim, and cadmium spokes. Wheel is...

V-Twin - 52-2046 - 16 inch x 3.00 inch Replica Front or Rear Spoke WheelDescriptionReplica front or rear 16 x 3.00" star hub type wheel include a black hub, chrome rim, and zicad spokes. Wheel is...

19" x 3.0" front and rear star hub wheel features a black rim and hub laced with a stainless steel spoke set.19" wheel includes drop center rim to fit dirt track tires. Fits:FL 1941-1966Additional...

This 16" X 3.00" front or rear star hub type wheel includes black hub, black rim and cadmium spokes. The rim and hub are laced together with cadmium spokes.NOTE: All spokes on wheel need to be...

Replica front or rear 18 x 3.00" star hub type wheel includes a black step style hub, black rim and cadmium spokes. Wheel is installed with a rubber rim strip.The valve stem hole is on the star side...

Front or rear 18" x 2.15" wheel includes a black rim and hub with stainless steel spokes.*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which...

Includes a black star hub, polished stainless steel spokes and a chrome Kelsey-Hayes type rim. Fits:UL 1937-1948 front or rearWL 1936-1952 rear onlyEL 1936-1940 front or rearFL 1941-1966 front or...

Includes a black star hub, polished stainless steel spokes and a black Kelsey-Hayes type rim. Fits:UL 1937-1948 front or rearWL 1936-1952 rear onlyEL 1936-1940 front or rearFL 1941-1966 front or...

Chrome 18" X 2.15" steel wheel rim features a full roll edge with weld in side.Rim features a rolled inner seam, features a bead construction with a width of 2.20". Valve stem center hole measures 8...

Replica front or rear 19" x 2.15" star hub type wheel with a black hub, black rim and stainless steel spokes. Wheel is installed with a rubber rim strip.Parkerized star cover and screw kit available...

Replica front or rear 19" x 2.15" star hub type wheel with a black hub, chrome rim and 40 chrome spokes. Wheel is installed with a rubber rim strip.NOTE: All spokes on wheel need to be inspected and...