Sportster XLH 900 Kick Start

Magnum BYO Build Your Own Clutch Cable Kit fits '99-'16 Touring, '21-'23 FLHR/XS, FLTRX/S/K & '99-'22 Sportster (Except RH Sportster) Models - Black Vinyl Take the guessing out of Handlebar Cable...

Bung King - Squish Plate fits Dyna, FXR & Sportster Models Bung King's own Squish Bar can be thought of as a modified 12 bar with additional safety and adjustment features. The center of the squish...

Thrashin Supply - P-54 Slim Front/Rear Footpegs Thrashin's P-54 Slim Front/Rear Footpegs are 1.375" wide, tapered platform pegs that have a comfortable amount of grip surface that has a slight...

Bung King - Fog Light Gusset Mount fits all Sportster and '18 & Up Softail Models Bung King's Gusset Mounted Fog Light Mounts mount to Bung King's crashbars on Sportster and 2018 to present Highway...

Drag Specialties Super Exhaust Port Clamps Fits Harley-Davidson '58-'85 XL Models These exhaust clamps are for Harley-Davidson XL Models 1958-1985. Make sure you check the fitment table below before...

The HardDrive Fork Boots will give your motorcycle a custom look and protect your fork tubes from dirt and debris thus prolonging fork seal life. Sold in pairs

Colony - 35mm Fork Slider Bottom Cap Studs with Nut fits '86-'07 Showa forks (OEM #45998-73) Features: Package of two Made in the U.S.A.

Thrashin Supply - Apex Mini Floorboards Features: Billet 6061 aircraft grade aluminum Stainless steel or aluminum clevis Made in the U.S.A

Paughco Straight-End Exhaust for Harley Sportster '57-'85 This exhaust is a chrome straight end drag pipe set with an inner diameter of 1-3/4". The package comes with brackets and tabs. Please note...

Drag Specialties - Rear Axle Kit fits '52-'78 Sportster Models (10.9375") This kit's bright chrome finish on the axle and hardware will beautify your bike. NOTES: Rear axle length given is measured...

V-Twin - Chrome Lower Fork Stem Cover fits '82-'86 FXR, '71-'84 FX, '57-'87 Sportster Models (OEM #45751-71A) Chrome lower fork stem cover is 1 piece and for FXR and FXD models. Fitment: FXR...

Colony - 9020-2 Rear Chain Adjuster fits '57-'78 Sportster, '52-'56 K Models - Cadmium Rear chain adjuster with a cadmium finish is 7/16" thick per side. Fitment: XL 1957-1978 K 1952-1956 ...

Colony - Fender Rail Mounting Kit fits '85-'86 Dyna Models Features: Comes complete with chrome bolts, nuts and acorns Fitment

Drag Specialties - Performance Spark Plugs fits '57-'78 Sportster Models This spark plug features a copper core electrode, which prevents oxidation and corrosion, provides good electrical and heat...

Paughco Slash Cut Exhaust for Sportster 1957-1985 Note that these pipes do NOT fit 1979 XL Models. Chrome shot gun drag exhaust pipe set has a diameter of 1-3/4". Set has slash cut ends and fits...

Colony - Tappet Adjuster Locknuts fits '38-'84 Big Twin (Except Evolution) & '57-'85 Sportster Models Features: Split locknuts with 9/32"-32 thread Made in the U.S.A.

Colony - Motor Mount Hardware fits '57-'85 Sportster Models (OEM #16218-52, 16230-52) - Chrome Features: Includes two 3/8"-24 x 613/16" bolts, one 3/8"-24 x 57/16" bolt, one 3/8"-24 x 53/16"...

Paughco Slash-Cut Drag Pipes for Harley Sportster 1957-1985 This is a chrome upsweep drag pipe header set for Sportster models. Comes with slash-cut ends. For 1980 – 1985 swingarm frames ONLY, but...

Paughco Hanger Bracket for Exhaust Pipes Hanger bracket by Paughco used for installing Part #s: 1800-1870,

Colony - 2450-1 Front Wire/Cable Clip (OEM #9979) Features: Can be used for various custom applications High-quality reproduction of original clips

Colony - 3646-5 Zinc Ignition Coil Mounting Plate Kit fits '82-'84 FXR, '65-'84 XL, '65-'84 FL Models (OEM #31727-72) Ignition coil mounting plate kit features a zinc finish Fitment: XL...

Drag Specialties - 12 Volt Dual-Fire Ignition Coil - Black 5 ohm/Points Ignition (Repl. OEM # 31609-65) Built with three things in mind: performance, quality and value. Once you install this coil,...

Old-STF Cycle - Brass Rocker Box Oil Line fits Ironhead Sportster Features: Old-Stf Ironhead Sportster loop rocker box lines. 1/4" Brass oil lines pre- bent with all necessary fittings. Easy...

V-Twin Replica XR 750 2 Gallon Gas Tank for Harley XL 1957-1978 Replica 2 gallon gas tank features the classic XR 750 design with steel construction. The petcock is on the left side. Accepts bung...

Paughco 1-3/4" Drag Pipes Fits Harley-Davidson 57-78, 80-85 XL Models Hanger bracket is required for installation, not included in package. Refer to part list below for additional accessories...

Colony - 8107-16 Cadmium Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '32-'73 G Models Cadmium stock cylinder base set includes 8 nuts & washers. Fitment: WL 1929-1952 XL...

Colony - 8170-10 7/16" x 3/4" x 1/8" Replica Steel Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Rebuilding the heads on your Shovelhead? Use our cadmium headbolt washer kits from Colony...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment

MCM - Black Replica Handlebar Riser Clamp fits '52-'72 Sportster, '52-'56 K, '60-'78 FL Models (OEM #56104-52) Replica handlebar riser clamp features a black finish and is for 2 piece handlebars...

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by Ron Trock...

750 XR hub lock nut set features a zinc finish and a thread size of 2.031. Fitment: XL 1957-1972 WR 1941-1952

750 XR rear wheel hub is chrome plated and includes 2 nuts. For 40 spoke hole rims.Features knock off threaded end for "quick change" rear sprockets. Includes 11/16 bearings to fit stock sportster...

750 XR rear wheel hub features an alloy finish and includes 2 nuts. For 40 spoke hole rims. Features knock off threaded end for "quick change" rear sprockets. Includes 11/16 bearings to fit stock...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut...

Colony - 8106-16 Stock Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '29-'73 G Models Chrome stock cylinder base set includes 8 nuts with washers. Sold as an 8 piece set...

Colony - 8488-10 Chrome Cylinder Head Bolt Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Cylinder head bolt washer chrome finish. Fitment: FX 1971-1984 XL 1957-1985 FL 1948-1984

Colony - 9829-28 Chrome Rocker Box Screw Kit fits '57-'76 Sportster Models Chrome rocker box screw kit. Fitment: XL 1957-1976