Sportster XLH 900 Kick Start

Front fork hardware kit includes gaskets, felts, retainers, washers, vent tubes and clamps.Kit does not include boots, order separately. Fits:XL 1954-1970Additional Information

Chrome die cast spark plug cover fits perfectly on a spark h ex for Big Twin 14mm pre 1999 models. Fits:FXST 1984-1999FXD 1991-1999FXR 1982-1994FLST 1986-1999FX 1971-1984FLT 1979-1999XL 1957-1985FL...

V-Twin - 37-8881 - Riser Cup Washer ChromeDescriptionChrome riser cup washer Fits:FXST 1984-UPFXR 1982-1994FXD 1991-2017FX 1973-1984XL 1962-UPAdditional Information

Kit includes nut, tapered spacer, lock washer, and chrome cap plug. Fits:FXR 1982-1988FX 1971-1984XL 1954-1988Additional Information UOM

Swivel tapered headlamp washers Fits:XL 1959-1995FX 1971-1984Additional Information OEM No.67815-59A

Horn cover mount hardware includes 3 screws, 3 lock washers, 3 nuts, 1 speed nut and 1 spacer. Used to mount FX and FL horns. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST...

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump...

Stainless steel exhaust header clamp bolt. Fits:XL 1957-1985FL 1948-1965Additional Information UOM1 - KIT

Brake rod adjuster nut Fits:XL 1957-1978K 1952-1956Additional Information OEM No.42264-52 UOM

V-Twin - 37-2096 - Phillips Head Chrome ScrewsDescriptionChrome 5/16"-24 phillips head screws for air cleaner and luggage rack applications. Fits:FXST 1984-1989FX 1971-1984WL 1941-1952UL 1941-1948FL...

M8 x 1-1/4mm x 40mm allen cap screw set for wide clamps.Sold as a pack of 10. Fits:XL 1957-1985FL 1948-1965Additional Information UOM10 -

Magneto mount plate kit includes breaker arm contact screw and washer.Use with 1965-70 XL mount plate and advance arm mechanism. Fits:XL 1965-1970Additional Information

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Stock single slot primary cover filler and clutch hole cap are easily installed and removaled with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

Stock single slot primary cover filler and clutch hole caps are easily installed and removed with a standard 15/16" wrench. These are sold each and two are required. Fits:XL 1952-1970Additional...

#58 magnetic 1/4"-20 set screw for Fairbanks Morse models. Fits:XL 1955-1970Additional Information UOM1 - PK M

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has a length of 46". Fits:XL 1957-1970Additional Information OEM No.67051-52A

Cable kit is for one side with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Black transmission drive speedometer cable with 16mm top nut . This cable has a length of 45.25". Fits:KH 1954-1956XLH 1957-1972Additional Information OE

Black tachometer cable for mechanical tachometer features a 16mm top nut.For use on 1965-1969 Sportster models with a magneto ignition. ...

Replica outer throttle and spark control cable is 42" long and features a vinyl casing. Cable is a cone braided type multi-strand wire. May be shortened for specific applications.Cable is...

Kit includes the magneto tachometer cable driven gear and a 29-1/2" magneto black tachometer cable.Includes a 16mm top nut. Fits:XL 1962-1970Additional Information

Stainless steel braided clutch cable features heavy duty construction designed for reliability and longer service. This cable has a casing length of 51" and an overall length of 60.375". Fits:XL...

Cable kit is for two sides with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

Black clutch cable features a heavy duty construction designed for reliability and longer service. The 55" long cable is 4" over stock. Fits:XL 1952-1970Additional Information

Replica clutch cable with adjuster, 51" casing, overall length 59-1/2".*NOTE: Requires 7/16" hole in the lever to mount stock cable adjuster, which is included with the cable. Fits:XL...

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

This series linker model float/arm set is our exclusive tooling, for exact Replica fit and function. Molded of nitrophyl material which is fuel resistant. Includes the wear block.Sold as a two peice...

Linkert DC carburetor bowl oversize nut kit includes an oversize stainless bowl nut, bowl nut tap, main nozzle, main nozzle tap, oversize gasket and spring. Fits:XL 1957-1966FL 1966-1966Additional...

Linkert DC carburetor bowl nut kit includes a gasket, spring and stainless bowl nut. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.

Stainless linkert DC carburetor low speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27339-57

Stainless linkert DC carburetor high speed needle valve. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27297-57

Linkert DC carburetor throttle disc is the 9A type. Fits:XL 1957-1966FL 1966-1966Additional Information OEM No.27280-57

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...