1966

Drag Specialties - Fat Bob-Style 3½-Gallon Gas Tank fits '48-'84 FX/ FL & Custom Frames to '84 Models Features Fat Bob-style tanks accept stock dash, speedo equipment and standard late-model (22mm) Harley petcocks Gas caps sold...

DP - High-Performance Friction Clutch Plates fits '57-'70 Sportster Models (Repl. OEM #s 37985-52A & 37985-57) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

S&S Cycle - 3.625" Bore Shovelhead Cylinder Kit fits '66-'84 Shovelhead Engines This Bore Shovelhead Cylinder Kit comes complete with front and rear cylinders, base nuts, headbolts, base gaskets and head gaskets. NOTE: 3.625" bore cylinders require...

Old-STF Cycle - Stainless/Black Rocker Box Split Oil Line fits '66-'84 Shovelhead The Old-STF Cycle Stainless/Black Rocker Box Split Oil Line is a high-quality kit that is designed to fit Shovelhead motorcycles from 1966 to 1984. This kit features...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5 gallons. Check the tank for flaws and fit before...

Drag Specialties - Buckhorn 1" Handlebars - Notched for TBW Drag Specialties 1" Buckhorn style handlebars for Harley model and custom applications. These bars are notched for Throttle By Wire (TBW) applications. Features: Available in a Chrome,...

Colony - 2144-1 Aluminum Primary Cover Filler Caps fits '54-'70 Sportster Models (OEM #34742-52A) Features Chrome or raw aluminum finish Made in the U.S.A. Fitment YearMakeModel 1958 - 1970 Harley-Davidson Sportster 900...

Accel - Electro-Mechanical Voltage Regulator fits '65-'69 FL/FLH Models Features: Provides precise control of charging system voltage for maximum performance and reliability Built with high quality components set to OEM factory specifications Black...

James Gasket - Main Drive Gear Seal fits '37-'79 Big Twin 4-Speed Models (OEM #35230-39) Features: Top quality main drive gear shaft seals Fitment 1979 Harley-Davidson Fat Bob FXEF - Notes: 1979Fits Early 1979...

James Gasket - Oil Pump Shaft Seal fits '68-'99 Big Twin Models (5-Pack) (OEM #26227-58) Features: Replacement Outer Oil Pump O-Ring Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...

James Gasket - Shifter Shaft Seal fits '57-'85 Sportster Models (5-Pack) (OEM #34035-52) Features: Replacement Shifter Shaft Seals Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson Sportster...

James Gasket - Mainshaft Double Lip Seal fits '67-'70 Sportster Models (5-Pack) (OEM #37741-67, 37741-67A) Features: Top quality main drive gear shaft seals Fitment 1981 Harley-Davidson Electra Glide Classic...

James Gasket - Primary Cover Lock Plate fits '65-'69 Big Twin Models Features: For Big Twin applications Fitment: 1965-1969 Harley-Davidson Electra Glide FL - - 1965-1969 Harley-Davidson 1200 Electra Glide FLH - -  

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models (Gaskets, Seals and O-Rings) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Primary Gasket fits '65-'84 FL/FLH/FX/FXE/FXWG Models Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the USA Note: Seals not...

James Gasket - 9 Hole Rigid Mount Foamet® Primary Cover Gasket fits '65-'88 Big Twin Models (OEM #60538-81, 60538-81A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Tail Lamp Gasket Kit fits '57-'72 lens (OEM #68123-55) Features: Top-quality replacement gaskets Fitment 1972 Harley-Davidson Sportster 1000 XLH - - 1972 Harley-Davidson Sportster 1000...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Complete Motor Gasket Kit fits '70-'84 Shovelhead Models 4-Speed (Fire-Ring™ Head Gaskets (OEM #17029-70A)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A...

James Gasket - Top End Gasket Kit fits '57-'71 Sportster (OEM #17030-57) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

James Gasket - Primary Gasket Kit fits '84-'86 Touring & '84-'88 Softail Models w/ Silicone Bead Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Complete Motor Gasket Kit fits '57-'71 XLH, XLCH Models (OEM #17026-71) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

Jims - 976 Engine Rotator Tool fits '55-'06 Big Twin Models (Except '06 Dyna Glide) Features: Rotates flywheel/piston assembly with engine still in frame or on a bench The perfect tool when doing pushrod adjustments, building big-inch engines and...

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1110 0.105" Camshaft Pinon Gauge Pins fits '54-'89 Big Twin Models Features: Use to check pinion gear for pitch diameters Check service manual for sizing chart Made in the U.S.A. Fitment 1989 Harley-Davidson Electra Glide Ultra...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 95760-XL Inner Cam Bearing Removal Tool fits '57-'90 Sportster Models Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 1725 Head Bearing Race Installer fits '36-'17 Big Twin Models w/ Stock or Custom Frames (Except '14-'17 Dresser) Features: Use to install steering head races, stock and custom, as well as install cups in the frame This tool pulls the races...

Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission Features: Removes kick starter clutch gear successfully, without damage to the gear Made in the U.S.A...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...

Jims - 95660-42 Main Seal Tool fits '41-'79 4-Speed Transmissions Features: Used to remove and install the main drive seal on specific Harley-Davidson® Big Twin models Made in the U.S.A. Fitment 1979 Harley-Davidson 1200 Fat Bob...

Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models Features: Used to remove press-fit tappet guides from crankcase Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...

Jims - 97235-55B Sprocket Shaft Bearing Nut Tool fits '55-'68 Big Twin Models Features: Used to install and remove bearing nut Made in the U.S.A. Fitment 1965-1968 Harley-Davidson Electra Glide...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...