1966

Black 3 piece rubber pedal pad set includes a set for rocker clutch and brake pedal pad.Sold as a set of 3. Fits:EL 1936-1940WL 1929-1952FL 1941-1964FL 1945-1966UL 1938-1948Additional Information

XLCH fudgesicle kick pedal rubber features a black finish. Fits:XL 1957-1979Additional Information UOM1 - EA M

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type.Sold as a pack of 4. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information <

Primary chain nylon pad. Fits:XL 1957-1976Additional Information OEM No.39978-58 UOM1 - EA

Primary chain tensioner nylon pad. Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

Nylon primary chain adjuster pads includes metal retainer Fits:XL 1957-1976Additional Information OEM No.39979-58A

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information

Green grip set is molded plastic like original. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.56200-62A

Yellow grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information UOM

Blue grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Red grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Black waffle handlebar grip set are soft plastic and have an inner diameter of 1-1/8" and are 4" long with chrome plugs.Sold in a quanity of 2. Fits:FL 1953-1972FX 1971-1972XL 1953-1972Additional...

Chain guard rubber and steel bushing set comes as a pack of 5. Fits:FLH 1963-1984Additional Information OEM No.11411

Replica white rib grip set is 1-1/8" ID and fits stock controls. Plastic construction.Sold in a quanity of 2. ...

Black Jack Hammer style grip set is 1" + 1/8" inner diameter to fit stock controls. Grip set features plastic construction.Original offering from V-Twin manufacturing over 30 years ago! Sold in a...

Black solenoid boot is molded rubber for use on 4 or 5-Speed starter solenoids.Replaces stock OE boot. Use with solenoid end cover. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST...

Replica black rubber grips with 1-1/8" inner diameter on both sides to fit internal throttle control and include chrome end caps.Sold in a quanity of 2. Fits:FL 1962-1973FX 1971-1973Additional...

Fudgesickle kick starter pedal rubber. Fits:FL 1941-1984EL 1936-1952G 1936-1963W 1936-1952Additional Information UOM1 - EA

1940 1/2" oval style chrome D shape footboard set with black pads attached in place without logo and 9-3/4" bracket spacing.*NOTE: Do not accept FLT or FLST models. Fits:FL 1941-1985Additional...

Female footpeg set for Sportster model driver applications. Constructed of machined female steel yoke finished with zinc plating and fitted with rubber slip on footpeg rubber.Rubber is replaceable...

Natural stainless steel mid footpeg support bar set is for frames with a "cone" type motor installed. This is extended length.Footpeg arms fit male FX style passenger pegs, not included. Order welded...

Mid footpeg kit includes right and left bar, Anderson footpeg set features stainless steel finish with male mount for flat side motors. Fits:FL 1941-1969Additional Information

Half moon footboard set features a raw finish. Set is un-finished and includes rivet holes with brackets riveted in place. Fits:FL 1941-1984W 1941-1952EL 1940-1952G 1941-1972Additional Information

Made of stamped steel, these D-shaped footboards feature rubber inserts in a stainless steel grid.Features a raised footboard pad with anti-vibration rubbers. This footboard set can also be used on...

Early style stock XL kickstand leg with a round end features a zinc finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information UOM1 - EA

Chrome driver footpeg support set is spline type.Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.50948-71

9-1/2" kickstand features a chrome finish.The pin is installed from the bottom and held in by a set screw, same as OEM. Fits:XL 1952-1979Additional Information

Chrome jiffy kickstand assembly includes late style mount bracket with built in spring plate, lock tab, spring, and flat bottomed forged side stand with mount hardware. Fits:FX 1971-1984EL...

Early style stock XL kickstand leg with a round end features a chrome finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information OEM No.50062-52

Replica parkerized kickstand lock tab. Fits:FX 1971-1984EL 1936-1940FL 1941-1984UL 1938-1948Additional Information OEM No.5009

Driver footpeg support bar set is the splined type with a zinc finish. Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.

Jiffy kickstand assembly comes in a chrome finish is extended for 2" to 4" front fork. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information

Chrome 3/8" footpeg mount stud set.Order shoulder bolts separately. Fits:FL 1965-1973Additional Information OEM No.50973-65

Heavy duty kickstand features 18mm outer diameter and is stock length.Kickstand is made of heat treated steel and chrome with flattened base as original. Fits:FX 1971-1984EL 1936-1940FL 1941-1984FXST...

Chrome passenger footpeg bracket plate for the right side. Fits:FLH 1965-1984Additional Information OEM No.52688-65

Footboard tab set is authentic forged steel construction for swingarm frames 1-1/8" in diameter. Fits:EL 1936-1940FL 1958-1984UL 1936-1940Additional Information

Jiffy kickstand assembly comes in a chrome finish and is stock length. Fits:FX 1971-1984EL 1936-1940FL 1941-1984Additional Information OEM No.

Chrome 'D' shaped footboard set features a solid mount board with chrome ribbed cover installed.Mounting bracket features 10" spacing. Fits:FL 1940-1984U 1940-1946W 1940-1952G 1941-1972Additional...

Extended kickstand is made of heat treated steel and chrome featuring flattened base as original. Kickstand measures 17-1/8" in length.Kickstand measures 12" from top bend to bottom bend. Fits:FX...

Forged kickstand is made of heat treated steel and chrome featuring flattened base as original. Kickstand is stock length. Fits:FX 1971-1984EL 1936-1940FL 1941-1984FXST 1984-1988Additional Information