Sportster XLCH 900 Kick Start

Ironhead LAF style header set features a chrome finish.*NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. Fits:XL 1957-1985Additional...

Original multi-piece design includes chrome mufflers, header pipes and mount brackets.Componenets available separately. For kick and electric start models. Fits:XLCH 1957-1978XLH 1957-1978Additional...

Replica chrome header set.Set will accept heat shields. Order clamps and muffler separately. Fits:XLCH 1957-1978XL 1957-1978XLH 1957-1978Additional Information

Rear heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65702-68B

Front heat shield is chrome and for stock or drag exhaust pipes. Fits:XL 1957-1984Additional Information OEM No.65728-66

Black 2:1 siamese hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames, and features a one piece design for Ironheads only.One piece header will...

Chrome 2:1 hi-exhaust header with a 1-3/4" outer diameter, fits under the carburetor on rigid or swingarm frames. Features a one piece designOne piece header will require the installer to saw out...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Foam pad only for rear fender bracket.Use with bracket to reduce vibration between the fender and the frame. Fits:XL 1954-1978XLCH 1954-1978Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1994 - Fork Boot Set BlackDescriptionStock type black fork boot set for XL modelsSold in a quanity of 2. Fits:XL 1954-1970Additional Information

Top bushing set Fits: FXD 1991-2005 FXR 1988-1994 XL 1954-1999 Additional Information UOM 1 - KIT

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Replica orange handlebar grip seat is 1-1/8" on both sides. Fits:FL 1962-1972XL 1962-1972Additional Information UOM1 - SET

V-Twin - 28-0673 - Solid Mount Kit ChromeDescriptionChrome solid mount kit is to replace rubber bushings and cap washers.Order bolt set separately. Fits:FXR 1982-1994FXD 1991-2017FX 1973-1984XL...

XLCH fudgesicle kick pedal rubber features a black finish. Fits:XL 1957-1979Additional Information UOM1 - EA M

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type.Sold as a pack of 4. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information <

Primary chain nylon pad. Fits:XL 1957-1976Additional Information OEM No.39978-58 UOM1 - EA

Nylon primary chain adjuster pads includes metal retainer Fits:XL 1957-1976Additional Information OEM No.39979-58A

AEE rubber shock bushings are for Big Twin models and are stock OE replacement type. Fits:FX 1971-1972XL 1954-1974FL 1958-1984Additional Information

Green grip set is molded plastic like original. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.56200-62A

Yellow grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information UOM

Blue grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Red grip set is molded plastic like original.Chrome end plugs available separately. Fits:FL 1962-1972XL 1962-1972Additional Information OEM No.

Black waffle handlebar grip set are soft plastic and have an inner diameter of 1-1/8" and are 4" long with chrome plugs.Sold in a quanity of 2. Fits:FL 1953-1972FX 1971-1972XL 1953-1972Additional...

Replica white rib grip set is 1-1/8" ID and fits stock controls. Plastic construction.Sold in a quanity of 2. ...

Black Jack Hammer style grip set is 1" + 1/8" inner diameter to fit stock controls. Grip set features plastic construction.Original offering from V-Twin manufacturing over 30 years ago! Sold in a...

Black solenoid boot is molded rubber for use on 4 or 5-Speed starter solenoids.Replaces stock OE boot. Use with solenoid end cover. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST...

Female footpeg set for Sportster model driver applications. Constructed of machined female steel yoke finished with zinc plating and fitted with rubber slip on footpeg rubber.Rubber is replaceable...

Early style stock XL kickstand leg with a round end features a zinc finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information UOM1 - EA

Chrome driver footpeg support set is spline type.Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.50948-71

9-1/2" kickstand features a chrome finish.The pin is installed from the bottom and held in by a set screw, same as OEM. Fits:XL 1952-1979Additional Information

Early style stock XL kickstand leg with a round end features a chrome finish and is 10-1/2" long. Fits:XL 1952-1979Additional Information OEM No.50062-52

Driver footpeg support bar set is the splined type with a zinc finish. Use with large female type driver pegs. Fits:XL 1952-1974Additional Information OEM No.

Kickstand pin kit for stock length kickstand. Fits:XL 1952-1984Additional Information OEM No.50090-53 UOM

XL kickstand mount tab is contructed of raw steel. Mount tab accepts stock extended XL kickstands, available separately. For use with 1" tubing. Fits:XL 1957-1978Additional Information

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.Uses large female driver footpegs. Order footpegs and return springs separately. Fits:XL...

Center kickstand kit is constructed of cast aluminum and includes spring, and hardware for mounting to stock swingarm frames. Fits:XL 1957-1981K 1952-1956Additional Information

Rear wheel brake rod and cable adjusting nut features a cadmium finish. Fits:XL 1957-1978K 1952-1956KH 1952-1956Additional Information UOM<