1967

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment 1981-1982 Harley-Davidson Electra Glide Classic FLH - Notes: 1982Fits...

MCM - Black Replica Handlebar Riser Clamp fits '52-'72 Sportster, '52-'56 K, '60-'78 FL Models (OEM #56104-52) Replica handlebar riser clamp features a black finish and is for 2 piece handlebars. Note: Includes 2 hex cap bolts 5/16"-20 with lock...

V-Twin - Tro-Cy Brass Petcock 3/8" NPT Solid machined natural brass, with 3/8" NPT thread and "full bore" 3/8" hose end. For all tanks with 3/8" NPT bungs. Note: 1970's original design by Ron Trock of Trock Cycles Fitment: XL 1955-1974

S&S Cycle - Standard Cover Billet Oil Pump fits '36-'69 Big Twin Models Features: Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and...

S&S Cycle - Solid Lifter Conversion Kit fits '66-'84 Shovelhead Model Features: Converts stock hydraulic lifters to adjustable solids Kit includes four nonadjustable steel pushrods, four adjustable inserts and instructions Made in the U.S.A...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 8752-19 Chrome Transmission Side Cover Cap fits '66-'85 Big Twin Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 7410-1-US -.002” Undersized Threads Spring Bearing Retainer fits '55-'68 Big Twin Models (OEM #24031-55) Features: Easy solution to the problem of oil seeping around the motor sprocket shaft Retainer features a high-quality lip...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Model (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 2685-1 Cadmium Rear Break Adjuster Nut fits '52-'78 Sportster Model (OEM #42264-52) Features: Made in the U.S.A. Fitment 1977-1978 Harley-Davidson Sportster 1000 XLT - - 1972-1978 Harley-Davidson Sportster 1000...

Colony - 2625-30 Cadmium Rear Fender Mount Kit fits '58-'80 FL/​FLH Model (OEM #8879-30) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made in...

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of...

Colony - 8111-12 Cadmium Oil Pump Mounting Hardware fits '36-'67 Big Twin Models (OEM #7035, 27691) Features: 1/4"-24 hard-to-find hex nuts come in a six-pack OEM style kit is a complete kit that includes studs, nuts and hex...

Colony - 8740-19 Cadmium Oil Pump Mounting Hardware fits '36-'67 Big Twin Models (OEM #24819-36, 24820-36, 3834) Features: 1/4"-24 hard-to-find hex nuts come in a six-pack OEM style kit is a complete kit that includes studs, nuts and hex...

Colony - 2145-1 Chrome Primary Cover Filler Caps fits '54-'70 Sportster Model (OEM #34742-52A) Features Chrome or raw aluminum finish Made in the U.S.A. Fitment YearMakeModel 1958 - 1970 Harley-Davidson Sportster 900...

Colony - 8106-16 Stock Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '29-'73 G Models Chrome stock cylinder base set includes 8 nuts with washers. Sold as an 8 piece set. Fitment: WL 1929-1952 XL 1957-1985 G 1929-1973

Colony - 8488-10 Chrome Cylinder Head Bolt Washer fits '71-'84 FX, '57-'85 XL, '48-'84 FL Models Cylinder head bolt washer chrome finish. Fitment: FX 1971-1984 XL 1957-1985 FL 1948-1984

Colony - 9829-28 Chrome Rocker Box Screw Kit fits '57-'76 Sportster Model Chrome rocker box screw kit. Fitment: XL 1957-1976

Colony - 8924-8 Handlebar Throttle Spark Roller and Pin Kit fits '71-'72 FX, '54-'72 FL Models (OEM #56278-10) Handlebar throttle spark roller and pin kit. Fitment: FX 1971-1972 FL 1954-1972

Colony - 8945-16 Hex Head Bolt fits '57-'72 Sportster Model (OEM #4714W) - Cadmium Hex head bolt, cadmium finish. Fitment: XL 1957-1972

Colony - 9207-4 Rear Brake Backing Plate Pivot Stud Kit fits '57-'72 Sportster Model (OEM #41876-54) Rear backing plate pivot stud for drum type mechanical brake . This pivot stud kit is a 3 piece set which includes the locating block, pivot stud and...

Colony - 9208-4 Rear Brake Backing Plate Pivot Stud Kit fits '54-'72 Sportster Model Rear backing plate pivot stud for drum type mechanical brake . This pivot stud kit is a 3 piece set which includes the locating block, pivot stud and stud nut in cadmium...

Colony - 9214-2 Parkerized Handlebar End Plugs fits '52-'56 K, '71-'73 FX, '54-'73 FL Models (OEM #56288-53) Handlebar end plugs featuring a parkerized finish. Fitment: K 1952-1956 FX 1971-1973 FL 1954-1973 XL 1957-1973

Colony - 9402-1 Chrome Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '82-'94 FXR Models Allen timing plug has a chrome finish. Fitment: FXST 1984-1999 FXD 1991-1999 FXR 1982-1994 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL 1936-1940 FL...

Colony - 9403-1 Cadmium Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '82-'94 FXR Models Allen timing plug has a cadmium finish. Fitment: FXST 1984-1999 FXD 1991-1999 FXR 1982-1994 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL 1936-1940 FL...

Colony - 9404-1 Cadmium Oversize Timing and Oil Tank Plug fits '84-'89 FXST, '86-'89 FLST, '57-Up Sportster Models Oversize timing and oil tank plug has a cadmium finish and features a 11/16-16 thread. Fitment: XL 1957-UP FXST 1984-1989 FL...

Colony - 9407-1 Oversize Timing Plug Tap fits '84-'98 FXST, '82-'94 FXR, '57-Up Sportster Models Oversize tap for oversized timing plug measures 11/16"-16 thread. Fitment: FXST 1984-1998 UL 1937-1948 XL 1957-UP FXR 1982-1994 FLT 1979-1998 FX...

Colony - 9514-2 Throttle Plunger fits '71-'72 FX, '52-'56 K, '54-'72 FL, '57-'73 Sportster Model (OEM #56400-53) Throttle plunger Fitment: K 1952-1956 FX 1971-1972 FL 1954-1972 XL 1957-1973

Colony - 3484-4 Front Brake Cable Adjuster Flat Type fits  '57-'72 Sportster Model Front brake cable adjuster screw is the round head with two flat style and features a cadmium plated finish Fitment: XL 1957-1972

Colony - 3498-2 Throttle Control Coil and Tail Lamp Stud Clamp Set fit '61-'77 XLH/XLCH, Models (OEM #9965W) Throttle control coil clamp and tail lamp stud clamp features a parkerized finish. Includes mounting hardware Fitment: XLH...

Colony - 3499-10 Fender to Brace Rivet Set fits '49-'84 FLH, '86-Up FLST, '79-Up FLT Models Fender to brace rivets set includes 10 3/16" x 3/8" fender to brace rivets Fitment: FLH 1949-1984 FLST 1986-UP FLT 1979-UP

Colony - 3533-3 Cadmium Front Brake Cable Clip fits '50-'71 FLH, '50-'71 FL Models (OEM #9963) Front brake cable clip features a cadmium finish Fitment: FLH 1950-1971 FL 1950-1971

Colony - 3538-4 Magneto Vent Cover Kit fits '58-'69 XLCH Model Magneto vent cover kit for Fairbank Morris and Joe Hunt magnetos includes a cover, screen, screw and lock. Fitment: XLCH 1958-1969

Colony - 9741-2 Chrome Front Brake Cable Adjuster fits '71-'72 FX, '50-'71 FL, '57-'72 Sportster Models (OEM #45159-50) Chrome brake cable adjuster for the front has a thread size of 5/16 X 24 TPI Fitment: K 1952-1956 FX 1971-1972 XL 1957-1972 FL...

Colony - 9753-9 Allen Type Primary Cover Screw Kit fits '57-'69 XLCH Model Allen type primary cover allen screw kit with stamp. Fitment: XLCH 1957-1969