Electra Glide FLB

Kit includes damper tubes with rings, screws, and washers, lower stops, slider seal washers and retaining rings for both sides. Fits:FL 1949-1976Additional Information

Fork damper tube set is without hardware.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.46100-48

Lower fork slider bushing set includes 2 long with a oil groove inside and 2 short bushings.1.625" inside diameter must be honed after installation. We recommend that a qualified machine shop install...

Brake cable tube fitting seat for the Glide drum front left side. Fits:FL 1949-1972Additional Information OEM No.45207-49

Kit comes with all parts necessary to thread into slider tube plug. Kit is for 2 sides.Sold as a pair. Fits:FL 1949-1976G 1949-1976Additional Information

Lower fork damper tube bushing for FLH models.Sold as a pair. Fits:FL 1949-1976Additional Information OEM No.46121-48

Locating washer for backing plate pivot stud.Sold in a quantity of five. Fits:FL 1949-1971Additional Information OEM No.44454-48

Brake backing plate pivot stud with locating washer. Fits:FL 1949-1971G 1958-1971Additional Information OEM No.44448-48

Chrome fork neck cup set with races installed.Includes bearings. Must order dust shields separately. Sold as a pair. Fits:FL 1960-1984Additional Information

V-Twin - 24-0117 - Upper and Lower Zinc Dust ShieldsDescriptionSet includes both an upper and lower dust shields. Each shield is zinc and is for use with Timken style bearings.Sold as a pair...

Chrome hex type cone cover nut features cover with built in nut. Fits:FL 1949-1979Additional Information OEM No.48330-48

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Front brake cable tube only chrome has a 5/16" x 24 thread. Fits:K 1952-1956XL 1957-1972 FrontFL 1950-1971Additional Information OEM No.

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tube includes fork damper kit, fork spring set, fork baffle kit, chrome fork tube cap, inner fork tube plug, oil seal, and snap rings. The fork tubes are stock and are 20" long.Sold as a pair...

Raw machined steel fork tube is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. ...

Fork tube set is 20" stock length.Before installing, compare old and new tubes. Be sure the stock top plug threads fit into the new fork tubes. Sold as a pair. *NOTE:...

Kit includes brake shoes, springs,polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, chrome backing plate, chrome drum, axle sleeve, nuts, cam with leverm and mount stud for right side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, polished backing plate, black drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud with...

Kit includes brake shoes, springs, satin chrome backing plate, chrome drum, axle sleeve, nuts, cam with lever and mount stud for left side brake.NOTE: Pivot stud hole is oversize to allow 7/16" stud...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Chrome steel spacer is 3/8" x 3/4" x 3/16".This spacer is used in the rear master cylinder and also a spacer for the brake pedal stop. Spacer can also be used on banana bulleye calipers that utilizes...

Hydraulic brake pedal features a stainless steel finish. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Brake pedal plate is hydraulic type. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA Ma

Pedal and master cylinder mount plate is for AEE hydraulic brake kit and features a zinc plated finish. Fits:FL 1941-1984FX 1973-1984Additional Information

Zinc plated brake pedal mount plate for hydraulic applications. Fits:FL 1941-1984FX 1973-1984Additional Information UOM1 - EA

Master cylinder constructed of cast iron and features a natural aluminum finish with an alloy top for Wagner and V-Twin master cylinders.Includes baffle plate as original! ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...

Black cap for filler plug. Fits:FL 1958-1978FX 1971-1978Additional Information OEM No.41765-58 UOM

Brass swivel fitting attaches the brake hose to the back of the wheel cylinder backing plate. Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.

Steel rear middle section of the brake line fits from the junction toward the rear caliper.Order the rubber hose for final connection to rear wheel cylinder to caliper separately. ...

Front section of rear brake line fits between the master cylinder and junction.*NOTE: Brake line will have oxidation under the nuts due to the plating process. Fits:FLH 1958-1969FL...

Chrome 5 piece wheel lug set for the front or rear brake drum. Lugs are 3/8" x 20 TPI.*NOTE: Will need a tap brake drum tool for threads. Fits:UL 1937-1948 Front or RearEL 1936-1940 Front or RearFL...

Black rear cast iron brake drum includes riveted sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome rear cast iron brake drum with sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome brake plunger assembly to replace stock components. Fits:FL 1958-1969Additional Information OEM No.41770-58

Chrome non polished Wagner style rear drum master cylinder is assembled with internals and includes cap and boot. Has rough surface with chrome plated finish.Master cylinder is 3/4" bore. Master...