Electra Glide FLHF

Distributor points plate for 2 bolt type auto advance distributors. Fits:FL 1941-1969Additional Information UOM1 - EA

Starter pinion gear bushing for electric starter gear and shaft. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA

York starter gear and shaft for use with FX-FL electric starter kit.*NOTE: Starter kit is filled with an OEM type starter, available from different companies. Fits:FL 1965-1984FX 1973-1984Additional...

1952-1977 FL electric starter mount bracket features an alloy machined aluminum construction finish. Allows starter motor to mount on top of transmission.For use on ultima 1.4k starter kit. Fits:FL...

Starter pinion gear screw. Fits:FL 1965-1984FX 1973-1984Additional Information UOM1 - EA Manufacturer

Zinc plated electric starter adapter plate for cast inner primary covers on 4-speed models.Accepts york electric starter kits. Mounts to inner primary with 5/16" screw in front hole and 1/4" in rear...

V-Fire electronic ignition system includes rotor and pickup sensor.Ignition system mounts on 6-volt stock point type distributors. When installed, distributor assembly retains stock look for...

Electronic ignition conversion kit. Fits:FL 1948-1969Additional Information UOM1 - KIT ManufacturerV-

V-Twin - 32-2094 - Magneto Inner Stud Mount SetDescriptionMagneto inner stud mount set.The advance stop pins features slotted head with left hand threads. Fits:FL 1941-1969EL 1936-1952Additional...

V-Twin - 32-2045 - 1965-1984 FL Electric Starter Kit Description Electric starter kit mounts to existing alloy cast inner to accept a high torque 12 volt starter. Motor includes the integral Bendix...

V-Twin - 32-2036 - Tail Lamp Spiral Cover SetDescriptionTail lamp spiral cover set is used on the rear fender to protect the tail lamp wire. The cover is a steel "slinky" spring type.Flexible spring,...

V-Twin - 32-2029 - Burkhardt Magneto Base CastDescriptionBurkhardt magneto base cast is clearanced for the "heavy duty" S.T.D., S&S and V-Twin brand cases.Ball features a milled groove for clearance...

Magneto advance arm with magnet.The magnet is used to hold the arm in position by adhering to the points cover screw. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information

Magneto advance post for advance arm kit. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - EA

Burkhardt offset Big Twin magneto base assembly includes the shaft, shaft drive spiral gear and (2) drive gears.For magneto installation. Assembly fits stock Big Twin cases. Fits:FL...

Main dash coil wiring harness assembly runs from the dash panel to the OEM type terminal box mounted behind the coil or dual point coils.*NOTE: Made from 16 gauge cotton braided over vinyl wire with...

Burkhardt Magneto rotor assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT Manu

Burkhardt Magneto lower drive assembly. Fits:FL 1941-1969EL 1936-1952Additional Information UOM1 - KIT

Horn and dimmer switch set is an accurate replica. Switches include cloth covered wires as the original. The dimmer switch is 3 wire and the horn button is 1 wire. Both switches is developed with new...

Left hand magneto points base plate.Left hand rotation is opposite of the standard Harley rotation. Fits:FL 1941-1969EL 1936-1952Additional Information

Burkhard magneto retard kit includes a clear top, gasket, ignition points and condenser kit and arm with mount pin for installation.This kit is for right hand (clockwise) rotation magnetos, XLCH...

Starter cable set is a 3 piece set.This three piece set includes one 6 gauge battery cable with 13/32" and 11/32" holes sizes and two 8 gauge black battery cablew with 17/16" and 11/32" hole sizes,...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:FL 1965-1985Additional Information UOM1 - KIT

2.0 kW starter motor includes a 9 tooth starter gear and 6 screw mounting for electric starter kits.Mounts with 6 screws on face. MFG # WW1370. Fits:FL 1958-1985Additional Information

Chrome alternator bolts on in place of original 12 volt generator. Includes chrome solid state regulator, gear, gasket and mount screw set.Features high power output, 17 amps @ 1000 rpm. *NOTE: On...

Starter solenoid kit includes a zinc solenoid, plunger assembly kit and an end cover boot. Fits:FL 1965-1984FXST 1987-1988Additional Information UOM

Big Twin coil mount with swtich bracket mounts bolts on to existing studs on FL and FX frames but does not accept cover. Mount features a raw finish.Bracket does not accept coil cover. *NOTE: Must...

York electric starter kit. Fits:FL 1958-1984Additional Information UOM1 - KIT ManufacturerV-Twin

Magneto retard lever set for Burkhardt magnetos. Fits:FL 1941-1969XL 1957-1970G 1937-1973Additional Information UOM1 - SET <

2020 new production replica dimmer switch with cloth covered wires.Switch may be painted if desired. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information

V-Fire completed electronic distributor assembly includes the reverse distributer drive gear conversion to convert to the reverse rotation.*NOTE: Distributor includes internals that require reverse...

V-Fire distributor assembly includes top cover, clip, shaft assembly with reverse tooth gear installed and sensor cup.Distributor is designed for a late model electric ignition and uses a reverse...

Dimmer switch rebuild kit replaces the inter components of the switch.Includes a dimmer switch lever, brass plate backlite insulator, contact base, brass contact, rivets and spring. Fits:UL...

Headlamp socket wire includes cloth covered wires and correct bulb 3-prong connector plug. Fits:FL 1960-1969Additional Information OEM No.67753-60

Magneto top cover features a red finish and comes with a key. Fits:FX 1971-1980FL 1955-1980Additional Information UOM1 - EA

Wiring harness kit features cotton braided wire and asphalt loom. Wiring kit fits early Big Twin models.Order handlebar and tail lamp wires separately. Fits:FLH 1965-1969FL 1965-1969Additional...

Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing.Switch features bottom exit wires, and stainless...

V-Fire Big Twin auto advance distributor assembly features a chrome plated base, body and top. Distributor is completely assembled with gear and all internal parts.Includes updated auto advance...

Battery cable is 6 gauge with 13/32" and 11/32" hole sizes on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shielded terminal ends. Use for ground post. Fits:FL...

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...