Electra Glide FLHF

Trumpet horn mount bracket for Shovelhead models. Fits:FL 1966-1984 ShovelheadAdditional Information UOM1 - EA

Timer cable to frame clamp. Fits:FL 1946-1969Additional Information UOM1 - EA ManufacturerV-Twin

Stanchion only is chrome for Big Twin models.These are only the stanchions from our turn signal mounting kit used for mounting the turn signals below the spotlamp unit. These do not include clamps. ...

Chrome front exhaust clamp set is for two into one single exhaust.Sold in a quantity of 2. Order bolt sets separately. Fits:FL 1941-1969EL 1936-1940Additional Information

Ignition coil mount plate will fit when using early coil for 1948-1973 applications. Fits:EL 1948-1952 Two way radioFL 1948-1973 Two way radioUL 1948-1948WL 1948-1952G 1948-1954 Servi-car two way...

Solid State regulator mount bolts directly to 2-brush generator housings on Big Twin and Sportster models.Regulator mount fits Accel and V-Twin finned type regulators. Fits:XL 1958-1978FL...

Chrome steel 90  bend type turn signal mount set is used for front or rear application.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM

Cable guide clip. Fits:FL 1966-1984Additional Information OEM No.45092-66 UOM5 - PK

Battery tray carrier bracket has a chrome finish. Fits:FL 1965-1984Additional Information OEM No.66212-65 UOM<

Chrome one piece bracket is for mounting spotlamps.The length between the mounting holes measures 13". Fits:FLH 1949-1984Additional Information OEM No.

Chrome bracket set is for front fork triple tree mounting. Set includes right and left sides.The bracket measures 1-1/2" center to center between the two top holes and 6-1/2" between the top and...

Turn signal chrome mounting kit has clamp and mounting bolt included. Kit is necessary for mounting the turn signals below spotlamp unit. Fits:FL 1968-1984Additional Information

Chrome steel flat type mount set for front or rear turn signal.Sold in a quantity of 2. Fits:FL 1963-1984Additional Information OEM No.68527-63

Polished 9" long mount bar for rear turn signals.The distance between the mount holes, center-to-center is 5-3/16". Fits:FL 1963-1973Additional Information

V-Twin - Zinc Plated Buddy Seat Nose Bracket fits '58-'84 FL Model Front nose seat bracket is used to mount buddy seats to mount systems and features a zinc plated finish. Fitment: FL 1958-1984

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome 2 bolt license plate bracket for fender mounting. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information OEM No.59995-5

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Chrome starter motor bracket fits Prestolite electric starter motor. Fits:FL 1966-1981Additional Information OEM No.31476-66

Black ignition coil mount kit includes the outer strip. These stock style brackets mount to existing studs and include nuts, screws, and washers to mount coil.Order separately studs to mount bracket...

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information

Seat T rear strap with radius corners features a raw finish. Fits:FL 1941-1980Additional Information UOM1 - EA

V-Twin - 31-0076 - Rear Seat T BracketDescriptionRear seat T bracket features a black finish. Allows police deluxe solo seat to be mounted on 2009-up FLT police bikes and 2021-up Highway King. For...

Chrome left vertical heat shield has worm clamps included. Fits:FL 1965-1984Additional Information OEM No.65707-77

V-Twin - 30-3187 - 1967 Replica Turn Out Muffler SetDescription1967 Replica chrome turn out muffler set features a seamless body design. Muffler is the exact replacement for 1967-1969 FL models...

Raw 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Chrome 15-1/4" megaphone tip features a round end with a 1-3/4" inlet. This is the tip only.Baffles and clamps not included. Fits:FL 1958-1984Additional Information

Chrome 15-1/4" megaphone tip has a 1-7/8" inlet to fit over OE style cigar mufflers. This is the tip only featuring a round end.Baffles and clamps not included. Tip fits over 1-3/4" outer diameter...

Bronx FL muffler tip kit includes chrome 24" muffler set. Set features two Bronx tips that fit on 1-7/8" outer diameter end. The inlet measures 1-3/4".For right or left side dual FLH muffler...

Chrome 15-1/4" megaphone tip set has a 1-7/8" inlet to fit over OE style cigar mufflers. Features a round end.Set of two. Baffles and clamps not included. For use with stock OEM style cigar mufflers...

Black front cylinder header pipe is for Shovelheads. Fits:FL 1966-1969Additional Information OEM No.65443-66 U

Rear head shield kit includes a rear pipe shield and y-pipe piece in chrome.*NOTE: Worm clamps included for installation. Fits:FL 1965-1969Additional Information

Short heat shield is to fit over 1-3/4" exhaust pipes. Fits:FL 1958-1984Additional Information UOM1 - EA Measu

Muffler includes one megaphone tip with heavy duty 1-7/8" clamp installed. Fits:FL 1958-1984Additional Information UOM1 - EA

Black combo exhaust connector pipe has bracket riveted in place as original, and includes 1-3/4" inside diameter "Y" connector.*NOTE: Flat (squash) pipe may require hand fitting. Edge of pipe may...

Chrome 31" muffler kit for use with dual exhaust. Muffler is 31" long with upsweep design. Inlet end fits 1-3/4" outer diameter pipes. Muffler set includes 1-7/8" clamp set, and 3" hanger clamps...

Kit includes two 22" FLH full chrome mufflers and two 15" long megaphone tips with heavy duty 1-7/8" clamps.For use with right and left side dual exhaust! ...