Electra Glide FLHF

Zinc plated primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.Kit is for use with OE type exhaust systems. *NOTE: Includes...

Zinc oval inspection cover for the left side with footpeg spline.. Fits:FL 1965-1984Additional Information UOM1 - SET

Zinc splined footpeg support is for the right side and is offset type.Mounting hole inner diameter measures 3/4". Fits:FL 1965-1977Additional Information UO

ISO mount swingarm chain guard has a black finish and comes with rubber bushing and rear bracket.Can also be used on 1958-1984 FL for the lighter FX look. Fits:FX 1966-1978FL 1958-1984FXE...

FLH style full chain guard has a gloss black finish and includes bushing. Fits:FL 1963-1982Additional Information OEM No.60302-63

FLH style full chain guard has a chrome finish and includes bushing.Center hole to center hole measures 10-5/8". Fits:FL 1963-1982Additional Information OEM

Lower front mount tie rod ball joint.The ball diameter is 1.259", the step downo from that is .940", the center is 1.007", the step down from the center is .857" and the end is 1.012". Fits:VL...

Includes 16-7/8" extra long rod, nuts and spacers.For use with 1.060" diameter seat posts. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information

Seat post kit includes 15-7/8" rod and mounting hardware. Fits:UL 1937-1948EL 1936-1940FL 1941-1980Additional Information UOM1 - KIT

Nylon bushing for hand lever Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Riser bushing set include 4 bushings. Fits: FL 1960-1972 Additional Information OEM No. 45732-60 UOM

Bates polished stainless steel hand lever assembly with ball end includes slotted lever bushing as original with 3/8" hole for brake or clutch. Fits:FL 1968-1984Additional Information

Polished stainless steel hand lever with a ball end. Fits:FL 1944-1969Additional Information UOM1 - EA Manufac

Hand lever pivot pin set consists of one pin, one grease fit ting and one retaining ring. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information

Polished hand lever is clutch or brake type. Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Chrome hand lever is clutch or brake type Fits:XL 1971-1981FL 1965-1981FX 1971-1981Additional Information OEM No.45024-65

Assembly includes cable pin. Lever has a 3/8" hole size for cable entry. Fits:FL 1968-1972FX 1971-1972Additional Information OEM No.38608-68

Assembly includes cable pin. Lever has a 3/8" hole size for cable entry. Fits:FL 1968-1972FX 1971-1972Additional Information OEM No.38608-68

Polished hand lever with ball end includes a slotted lever as original with a small hole for brake or clutch. Fits:FL 1941-1969Additional Information OEM No.

Pivot pin and bushings for hand lever. Fits:FX 1971-1984XL 1968-1987FXR 1984-1987FXST 1984-1987FLT 1979-1987FLST 1986-1987FL 1968-1984Additional Information

Brake handle lever assembly features a polished finish.NOTE: Does not have hole for mirror which is specific for 1965 only. Fits:FL 1965-1971Additional Information

Chrome duo-glide bar set is a chrome stock type for throttle only. Set is for use with Big Twins with automatic advance distributors (1965-1969 models) or nose cover advance units (1970-1972 models)...

Cover set is stainless steel and 6-5/8" overall length. Use with 1/4-28 x 5/8" allen socket cap. Mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL...

Tweek bar polished 41mm fork brace is a 2 piece design which clamps directly to fork tube.The distance center to center measures 10". Fits:FXDWG 1999-2005FXWG 1980-1986FXST 1984-2013FLH...

This brake drum cooling ring is accurately cast from new tooling exclusively by V-Twin MFG.Brake drum cooling ring is for use on 8.350" outside diameter OE brake drum. Order hardware separately. ...

Chrome handlebar riser cover has a hole for steering damper control. Fits:FL 1960-1979Additional Information OEM No.56589-60

Stainless steel fork slider cover set is stock length 6-5/8" and mount holes measure 1/4"x 28 thread.Use 1/4"-28 x 5/8" allen socket cap. Fits:FLH 1949-1984Additional Information

Cover set is chrome and 6-5/8" overall. Mount holes measure 1/4"x 28 thread.Use with 1/4-20 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Chrome top triple tree cover has a measurement of 3-1/2" center to center. Fits:FL 1960-1972Additional Information OEM No.45741-60

Stainless steel top triple tree cover has a measurement of 3-1/2" center to center. Fits:FL 1960-1984Additional Information OEM No.45741-60

Cover set is chrome and 6-3/8" overall.Use with 1/4-28 x 5/8" allen socket cap. Fits:FLT 1980-2013FL 1949-1984FLST 1986-2017Additional Information

Set features upper and lower adjustable trees with tabs and bolt.Lower tree has 2 positions for rake, as located by 2 tabs with pins. Includes tabs for slider covers. *NOTE: Order rubber handlebar...

Chrome billet 3  rake ball milled triple tree set includes top nut and has 2 grooves for 41mm fork tubes.Order bearings, cone nut, and dust covers separately. *Note: Can also be...

V-Twin - 24-1964 - 7 inch Headlamp Cowl Kit BlackDescriptionBlack 7" cowl kit available with complete light assembly with rim and includes matching top handlebar cover and Beck bulb.Kit is made out...

V-Twin - 24-1962 - Fork Slider Black Cover SetDescriptionBlack powder coated cover set for the fork sliders are 6-5/8" long. Mount holes measure 1/4"x 28 thread. Fits:FLH 1949-1984Additional...

V-Twin - 24-1960 - 7 inch Headlamp Cowl KitDescriptionBlack powder coated 7" headlamp cowl kit with 55/60 watt H-4 unit. Screws are stainless steel. The cowl and handlebar cover are black powder coat...

Adjustable hard chrome fork tube assembly with polished sliders.Hard chrome 41mm adjustable fork tube assembly with polished sliders includes black adjustable rake triple tree set. Internals...

Handlebar riser black cover is for the cowl top opening. It has a smooth style finish. Fits:FL 1960-1979Additional Information UOM1 - EA <

1" tapered Spring Fork neck cup is zicad plated. Kit includes Spring Fork shape neck cup, ball bearings, upper and lower races, and chrome top nut with dust cover pressed on.Timken style bearings...

25-1/2" Spring Fork kit is black with chrome springs. Spring Forks are offset. Top triple tree is machined chrome design without ears. Use post risers with stud to top of rear fork legs. Legs thread...