1968

V-Twin - 39-0769 - 1968-1970 Speedometer with 1:1 Ratio Description Speedometer has a ratio of 1:1 and features a black face with silver numbers reading 0-120 mph and a red, white and black needle...

Police speedometer with red needle is 1:1 ratio. Fits:G 1968-1973FL 1968-1980Additional Information UOM1 - EA

85mm GPS speedometer kit includes speedometer, chrome upper ring, lower clamping ring and cast dash panel.*NOTE: GPS speedometer and electric tachometer available seperately. Fits:FXST 1984-1995FLST...

85mm speedometer lower inner ring with 120mm outer diameter and 85mm inner diameter to secure 85mm gauges to dash panel. This is the underside washer. Fits:FL 1941-2009FLH 1941-2009Additional...

Set of hooks are used to hold tank panels to fill the gap between 3.0 and 5.0 gallon bobbed type tanks.Use with FLH panel. This style panel mounts under the steel dash panel 2 and 3 light and with...

GPS tachometer kit includes a black 85mm GPS tachometer and a chrome adapter ring to fit dash models.The GPS speedometer uses satellite signal for operation. Sensor pad must be mounted on external...

Replica Police speedometer has a ratio of 2:1 and features a black face with a white needle and 0-120 mph numbering.Includes a male speedometer fitting to accept cable. Accepts plug in lamp socket,...

Early reproduction speedometer tin face features a black background with white numbers and center. 0-120mphThe speedometer must be disassembled to install this face. Fits:FL 1968-1968Additional...

Chrome dash panel is 19-1/2" long and is constructed of ABS plastic. Rubber strip is included.Panel uses a 5" speedometer. Fits:FLST 1986-1990FXST 1984-1990FL 1968-1984Additional Information

Dash base spacer is .120" thick.Spacer is for spacing dash base and switch in relation to tanks. Fits:FXST 1984-1995FL 1941-1984FLST 1986-1995Additional Information <

Dash base spacer is .060" thick.Spacer is for spacing dash base and switch in relation to tanks. Fits:FXST 1984-1999FL 1941-1984FLST 1986-1995Additional Information <

Dash base spacer is .030" thick.Spacer is for spacing dash base and switch in relation to tanks. Fits:FXST 1984-1995FL 1941-1984FLST 1986-1995Additional Information <

Louvered dash plate is chrome steel with a protective foam strip backing for easy installation. Fits FLH cast dash. Fits:FL 1967-1984Additional Information UOM

Speedometer has a ratio of 1:1 and features a black background with white numbers reading 10-120 mph.Graphics are 1989-1995 style for Fat Bob dashes. Use with a 23 tooth transmission drive unit...

Replica chrome die-cast dash speedometer housing comes complete with lens set and a dash strip.Dash is a replacement for OEM #71241-68. Fits:FLST 1986-1990FXST 1984-1990FX 1980-1986FL...

Deco 48mm speedometer kit has a ratio of 2:1, and features a white face with black numbers reading 0-110 mph.Includes gauge, bracket, rubber handlebar clamps, and proper cable which can be installed...

Dash Panel Lens Clip Fits:FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information OEM No.71297-68

Dash Panel Retainer Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information OEM No.

Dash Lens Support Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information OEM No.<

Speedometer cable clip has a zinc finish. Fits:FL 1957-1984Additional Information OEM No.67075-57A UOM

Knurled style reset knob with #4-40 UNC threaded end.For late style FLH speedometer use with a 2-light, 3-light or cateye style tin dashboard. Fits:FL 1968-1984Additional Information <

Speedometer bezel/lens 3 piece kit includes stainless steel bezel, glass lens, and sealing gasket.This is the wider bezel for 1948-95 mechanical speedometers. The diameter of the glass measures...

Replica flat glass lens is for speedometers. Fits:EL 1936-1940FL 1941-1984Additional Information UOM1 - EA

Police special speedometer has a ratio of 1:1 and features a black face with white needle and white numbers reading 0-120 mph.Speedometer features a male fitting on the back of the speedometer for...

Police Special" speedometer tin face features all black background with white numbering. 10-100 mph.The speedometer must be disassembled to install this face. Fits:FL 1968-1980 PoliceAdditional...

Speedometer Tin Face feautures all black background. 0-120 mph.The speedometer must be disassembled to install this face. Fits:FL 1968-1980Additional Information

Early reproduction speedometer tin face features a black background with white numbers and center. 0-120mphThe speedometer must be disassembled to install this face. Fits:FL 1968-1968Additional...

Speedometer is for a Fat Bob and has a ratio of 1:1. Features a black background with white numbers reading 0-120 mph and a red, white and black needle.The lens has a 4-1/4" diameter and accepts a...

Tombstone style speedometer has a ratio of 1:1 and features a black background with silver numbers reading 1-12 mph x 10 and a red needle.Includes a chrome set trip knob. Speedometer features a male...

Speedometer has a ratio of 1:1 and features a gold background. The face is black with green numbers reading 10-120 mph and the needle is red.Speedometer features a male fitting on the back of the...

Police Special speedometer has a ratio of 1:1 and features a black face with white numbers reading 10-100 mph and a white needle.Speedometer features a male fitting on the back of the speedometer for...

Replica Police speedometer has a ratio of 2:1 and features a black face with a white needle and 0-100 mph numbering. Fits:FL 1962-1985Additional Information UOM

Magneto tachometer kit includes mount bracket to mount to XL handlebar mount.Tachometer is OEM HD, manufactured in Italy. Fits:XL 1957-1970Additional Information

85mm speedometer adapter ring features a chrome finish and is for use with cast panels. Fits:FL 1968-1995Additional Information UOM1 - EA

Replica black die cast dash speedometer housing comes complete with lens set and a dash strip.Dash is a replacement for OEM #71241-68. Fits:FLST 1986-1990FXST 1984-1990FX 1980-1986FL...

Plain mounting plate includes hardware and spacer kit. Fits:FXST 1984-1995FLST 1986-1995FL 1948-1984FX 1980-1986Additional Information

Five light wiring harness dash base assembly is for a two br ush generator with electric start.Assembly includes cloth-covered harness pre-wired to dash base, a five post key switch, terminal box,...

Odometer reset knob is equipped with a screw for 2:1 and 1:1 ratio speedometers. Fits:FL 1968-1984Additional Information OEM No.67215-68 <

Speedometer adapter ring kit will mount 3-3/8" O.D. tachometer, speedometer or 85mm GPS speedometer. Kit includes chrome adapter ring and bracket.For stamped steel 2 and 3 light cateye dash panels,...

Ignition switch spacer is .040" thick.Spacer is for spacing dash base and switch in relation to tanks. Fits:FXST 1984-1995FL 1941-1984FLST 1986-1995Additional Information