Electra Glide FLH

Drag Specialties - Predator Seat fits '54-'84 FX/FL/FLH &'80-'84 FXWG This low profile predator seat is a sleek looking seat and is molded with polyurethane foam promoting supreme comfort. Made with black vinyl and smooth stitching, this seat is...

All Balls Racing - Swing Arm Bearing Kit fits '58-'85 Harley Big Twin Models (Except Softail) Features Contains all of the bearings, shafts, seals, and bushings required to build a swing arm to factory specs Manufactured from 52100 bearing...

Belt Drives Ltd. - Kevlar Clutch Kit fits:'68 - 'E84 Big Twins Clutch plates are made of 6061-T6 or high tempered steel with Belt Drives Ltd. race proven kevlar material. Each plate design was tested so that the maximum performance is achieved...

Available for 12V applications in a black finish Updated end plate has an extra set of mounting holes to align the fins on the regulator with the fins on the engine If you have purchased a Cycle Electric generator since 1984 it may have the...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment 1981-1982 Harley-Davidson Electra Glide Classic FLH - Notes: 1982Fits...

S&S Cycle - HI-4N Ignition Module Kit fits '70-'99 Big Twin Models Features: Updated version of the popular Crane HI-4 ignition More power than the stock ignition Single-fire and dual-fire function built into a single module All-metal housing...

S&S Cycle - Billet Oil Pump fits '70-'91 Big Twin Models Features: Kit includes an oil pump with cover, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

Belt Drives Ltd. - 2" Open Belt Drive Kit fits '70-'78 Big Twin Models Features: Ball-bearing lockup clutch provides approximately 60% more surface contact area than the stock clutch for smooth, sure power transfer Kit includes motor plate, starter...

Belt Drives Ltd. - 2" Shorty Belt Drive fits '70-'78 Big Twin Models Features: Designed for electric start applications (use 90-06 style starter) Kit includes starter housing, BDL ball-bearing lockup clutch assembly with ring gear, starter gear...

Belt Drives Ltd. - 1-1/2" 4-Speed Belt Drive fits '70-'83 Big Twin w/ Rear Chain Drive Features: 1-1/2" and 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and...

Belt Drives Ltd. - 3" Belt Drive Kit fits '70-'78 Big Twin with Electric Starter Features: Designed for electric start applications Kit includes 141-tooth drive belt, motor plate, clutch hub, starter pinion gear assembly, compete set of clutch...

Colony - 9653-4 3/8-16 x 3/8-24 Transmission Stud for '36-'83 4-Speed (STD.) (OEM #34724-36) Features: Studs are heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A...

Colony - 8752-19 Chrome Transmission Side Cover Cap fits '66-'85 Big Twin Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8400-8 Chrome Rocker Shaft End Cap fits '66-'84 Big Twin & '57-'70 Sportster Models Features: Individual chrome cap nut and bolt sets for specific applications Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - 8610-1 5/8"-18 Crankcase/Oil Tank Hex Timing Plug fits '86-'95 Sportster Models (OEM #2326-26) Features: Timing plugs in a variety of styles and fitments Include kit for stripped timing plug...

Colony - 9401-1 Aluminum Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - 2625-30 Cadmium Rear Fender Mount Kit fits '58-'80 FL/​FLH Models (OEM #8879-30) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made in...

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of...

Colony - 9877-2 Cadmium Oil Screen Plug fits '70-'80 Big Twin Models (OEM #657) Features: Oil Screen plug for Big Twin models Made in the USA Fitment 1984 Harley-Davidson Electra Glide Special...

Colony - 9645-2 Cadmium OEM-Style Oil Pump Plug fits '84-'99 Evolution Big Twin Models (OEM #26263-80) Features: Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...

Colony - 3499-10 Fender to Brace Rivet Set fits '49-'84 FLH, '86-Up FLST, '79-Up FLT Models Fender to brace rivets set includes 10 3/16" x 3/8" fender to brace rivets Fitment: FLH 1949-1984 FLST 1986-UP FLT 1979-UP

Colony - 3533-3 Cadmium Front Brake Cable Clip fits '50-'71 FLH, '50-'71 FL Models (OEM #9963) Front brake cable clip features a cadmium finish Fitment: FLH 1950-1971 FL 1950-1971

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube, hardware kit and clear vent tube. Battery is lead...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery...

V-Twin - AEE Mid Footpeg Support Bar Set fits '41-'99 FLH/FLT Models Natural stainless steel mid footpeg support bar set is for frames with a Flatside motor. Footpeg arms fit male FX style passenger pegs, not included. Order welded on lower frame...

Drag Specialties - Rear Chain Adjuster Bolt fits '48-'72 Big Twin (3/ 8”-24 x 3”) (OEM #41576-36) Features: Adjuster bolts for rear chain Fitment 1971-1972 Harley-Davidson 1200 Super Glide...

Colony - Throttle Roller/Pin Kit fits '54-'65 Big Twin Models (OEM #56276-31, 56278-10) Features: Kit includes hardened and grounded rollers, pins, coil plug set screws and control wire ends Designed specifically for Harley-Davidson­® Made...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...

Drag Specialties - Rear Master Cylinder fits '58-'72 FX/FL, 3/4” bore (OEM #41761-58) - Chrome Features: Complete rear master cylinder assembly Polished and chrome-plated Fully assembled for easy...

Drag Specialties - Oil Plug Temperature Gauge fits '66-'84 FX/FL/FXWG Models Features: Sensitive to oil temperatures up to 350°F Chrome gauge bezel For 66-84 FX, FL, FXWG (3 7/8” L) Fitment 1984 Harley-Davidson Electra Glide...

Drag Specialties - Replacement Oil Tank fits '65-'E82 FX/FL Models (OEM #62483-81) Features: Includes drain/fill plugs, cap assembly and gasket Approximately 3-quart capacity Fitment 1981-1982 Harley-Davidson Electra Glide Classic...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing...

Colony - Cylinder Base Stud Set fits '30-'77 Big Twin Models (OEM #16831-30) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - Inner Primary Mount Kit fits '70-'79 Big Twin 4-Speed Models (OEM #16830-54, 4017, 4021) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Allen Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - Seat Post Rod Assembly fits '48-'80 Big Twin Models (OEM #51634-36, 51661-36) Features: Made in the U.S.A. Replacement Part for OEM: 5163436 5166136 5167225 5167425 5179131 Fitment 1984 Harley-Davidson Electra Glide...

Colony - 9400-1 Chrome Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...

Colony - Axle Nut/Washer Kit fits '46-'71 Big Twin, '57-'71 Sportster Models (OEM #43886-30, 534) - Chrome Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of original...