1970

Stainless steel clutch cable features heavy duty constructio n designed for reliability and longer service. This cable ha s a casing length of 52.56 Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FXWG...

Cable kit is for two sides with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Black clutch cable features a heavy duty construction, designed for reliability and longer service. The cables casing length is 48" with a stock outer diameter. Fits:FX 1971-1984FL...

Zinc brake cable adjuster for the front. Fits:K 1952-1956FX 1971-1972XL 1957-1972FL 1950-1971Additional Information OEM No.451

Chrome brake cable adjuster only for the front. Fits:XL 1952-1972FX 1971-1972FL 1950-1971Additional Information OEM No.45159-50

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 48" casing length and is 52.5625" in overall length. Fits:FLH 1970-1984FXEF...

Black clutch cable features a heavy duty construction designed for reliability and longer service. The 55" long cable is 4" over stock. Fits:XL 1952-1970Additional Information

Replica clutch cable with adjuster, 51" casing, overall length 59-1/2".*NOTE: Requires 7/16" hole in the lever to mount stock cable adjuster, which is included with the cable. Fits:XL...

Black clutch cable feature heavy duty construction designed for reliability and longer service. This cable has a 56" cas ing length and an overall length of 62.625". Cable is 4" ove r stock. Fits:FL...

Black clutch cable features heavy duty construction designed for reliability and longer service. The cables casing length is 48 Fits:FX 1971-1984FL 1968-1984Additional Information <

V-Twin black clutch cable is 6" over stock length. Casing is 57" with an overall length of 65".Features a heavy duty construction designed for reliability and longer service life. Fits:FL...

V-Twin black clutch cable has a casing length of 51.625" and a 58.50" overall length. Fits:FL 1968-1983FXST 1984-1985FX 1971-1983FX 1980-1986Additional Information

York 4-speed clutch cable for use with 4-speed kick starter covers.Use with kick starter covers with cable operated ball-ramp clutch release assembly. *NOTE: Uses a small hole perch type handlebar...

7-tooth drive gear provides the speedometer with the proper RPM featuring a smaller inner diameter than OE.. Fits:FL 1969-1980FLH 1969-1980Additional Information

Eyelet clutch cable for 4-speed models will work with late model handlebar assemblies. Fits:FX 1968-1984FL 1968-1984Additional Information UOM1

Speedometer cable and turn signal clip is cadmium plated. Clips fits 1954-1965 speedometer cables, 1973-1977 turn signals and 1970-1971 KH, XL. XLH, XLCH seats. Fits:XL 1970-1971XLH 1970-1971KH...

Petcock screen only, plastic. Fits:FL 1966-1974FX 1971-1974XL 1955-1974Additional Information OEM No.62096-69

Petcock is wing type with zinc finish has a 3/8" NPT and accepts a 5/16" fuel line. Includes screen and 2 handles, sliding control valve with reserve. Fits:FX 1971-1974XL 1955-1974FL...

Shovelhead Keihin carburetor kit includes intake mainfold, insulator spacer, clamp, mount stud and replica Keihin carburetor.*NOTE: Order single throttle calbe and air cleaner and bracket separately...

V-Twin - 35-2030 - 47mm OKO Shorty Carburetor Kit BlackDescriptionBlack performance 47mm shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

V-Twin - 35-2001 - Linkert Carburetor Float BowlDescriptionLinkert carburetor float bowl fits 1936-up Big Twin overhead valve models. Fits:FL 1936-UPEL 1936-UPE 1936-UPAdditional Information

Black intake manifold clamp set is a two piece o-ring type.*NOTE: Must order o-ring seals separately. Fits:FX 1971-1977FL 1955-1977XL 1955-1977Additional Information

OKO 42mm flatside carburetor kit includes vertical flange adapter, rubber sleeve, air cleaner adapter, lower carburetor stud and strap bracket. *Shown installed on a 1966 flat side Shovelhead.42mm...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

Performance 47mm shorty carburetor with natural finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response. Uses flat...

CV carburetor adapter kit includes 2 bolt flange, seal ring and mounting bracket with choke bracket. Will mount to stock intake manifold.Accepts OEM and replacement CV carburetor. Place carburetor...

Cv carburetor mount bracket features a natural stainless steel finish and mounts to the top of carburetor with four screws.Mounts to the 2 vertical or stock XL and Big Twin manifolds. Bracket...

Kit includes butterfly type Keihin carburetor assembly, stock intake manifold, spacer kit, clamp set and air cleaner mount kit. Fits:XL 1957-1977FL 1966-1977Additional Information <

Keihin carburetor kit with butterfly type carburetor without air cleaner includes manifold and intake clamps. Fits:FL 1966-1977FX 1973-1977Additional Information

XL Keihin carburetor kit. Fits:XL 1957-1977Additional Information UOM1 - KIT ManufacturerV-Twin<

Tillotson idle mixture screw features an adjustable knob and features a zinc finish. Fits:FL 1966-1970Additional Information OEM No.27688-66 <

OKO polished 3/8" NPT hex body petcock with downward facing 5/16 fuel spigot.Does not include 22mm nut. Includes stainless steel screen. Fits:FL 1966-1974XL 1955-1974Additional Information

Alloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump nozzle for increased throttle response.This is the R-2 version of...

Black intake manifold clamp set includes o-ring style seals and fillister screws. Fits:FX 1971-1977FL 1955-1977XL 1957-1977Additional Information

Kit includes 38mm OKO flatslide carburetor with built in choke activator, spigot intake manifold, throttle cable, two bolt flange adapter and twist grip set.Kit includes seal adapters for use with...

Intake manifold clamp set is a two piece set with nut style clamps. Unique design will give the vintage "plumber" manifold look for later Panhead and Shovelhead models.Set includes screws, o-ring and...

Black hex petcock is forward facing and is constructed of forged brass with screen. Features 5/16" National Pipe Thread brass hose spigot. On/Off handle is black.For early style 5/16" NPT petcocks on...

Sifton chrome petcock rear facing with 3/8" National Pipe Thread. Features solid brass construction with on/off and reserve positions, screen, and a 3/8" fitting. Fits:FX 1971-1974XL 1955-1974FL...

Black petcock with right outlet features 3/8" National Pipe Thread. Includes nylon filter screen, washer, and reserve position. Fits:FX 1971-1974XL 1955-1974FL 1965-1974Additional Information