Sportster 1200S Sport XL

Ngk Spark Plugs - B6L - Spark Plug - B6LFeaturesPure alumina silicate ceramic insulator, provides superior strength and better heat transferTriple seals prevent leakageCorrugated ribs prevent...

Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits 1957-1978 XL models. Measures...

Chrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to top. Fits: XL 1957-1978 Additional Information

Pull type throttle spiral is for Spring Fork front ends. It reverses direction on 1954-73 throttles.*NOTE: Use the "pull" type handbar spirals to use braided pull type cables. Use the same outer...

Throttle spark control pin roller collar Fits:FL 1941-1972G 1927-1972K 1952-1956J 1921-1929FX 1971-1972EL 1936-1940WL 1929-1952XL 1957-1972F 1910-1920VL 1930-1936Additional Information

Spring Fork throttle plunger Fits:K 1952-1956FX 1971-1972FL 1954-1972XL 1957-1973Additional Information OEM No.56400-53A<

Spring Fork handlebar grip cap screw with tapered end is 8-32 X 1/4". Fits:K 1956-1956G 1954-1972FX 1971-1972FL 1954-1972XL 1957-1972Additional Information

Handlebar throttle end screw is zinc plated and is for use with FLH and XL-K models Fits:K 1952-1956FL 1953-1971XL 1957-1970Additional Information

New Old Stock" from 1980, rear hub cap is 4-prong, rusty raw steel style. Fits:XL 1952-1978Additional Information UOM1 - EA

AMF parts book for 1954-1978 Sportsters. Fits:XL 1954-1981Additional Information UOM1 - EA Manufacturer

Parts and manual set includes 3 different books for 1970-1984 Ironhead models.This set features the following books: Spare Parts Book for 1954-1965 XL, XLH Service and Parts Manual and V-Twin XL...

Sportster service and parts manual is for 1970-1976 XL models.Shop book includes service, parts and dealer tips for the models and years that are listed. Features 384 pages. ...

V-Twin - Black Leather Solo Seat Kit fits '52-'78 Sportster Models Includes Bates style tuck and roll leather solo seat, chrome 2" spring and mounting hardware. Note: UPS may consider this part...

XLCH solo seat kit includes a replica black leather solo seat with a zinc front solo seat nose bracket, chrome seat spring support bar and a chrome 2" seat spring set.Solo seat kit requires frame to...

Spoke set features 40 spokes and 40 spoke nipples.Spokes are easy to clean and maintain. For use on a 19" front drop center rim with a front brake drum alloy hub. Measurement from center of spoke...

XR rear hub includes the bearings to accept a 11/16" axle and a 51 tooth sprocket.*NOTE: Rear sprocket adapter and lock nut tool included. Fits: XL 1957-1989 Additional Information

XR 750 front spool hub is full alloy construction and features a natural finish with 9/16 innner diameter ball bearings. Also includes center and center tube and hex nut.Accepts 11/16" axle shaft and...

V-Twin - 44-1959 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes the swingarm pivot bolt, race set, and lock tab. Fits:XL 1952-1973Additional Information

Assembly includes a parkerized pivot bolt, bearings, races, lock tabs, seals, spacers, hardware and zinc plated pivot pin.. Fits:XL 1952-1973Additional Information

Front hub dust shield. Fits:XL 1952-1972Additional Information OEM No.43636-52 UOM1 - EA <

Assembly includes a chrome pivot bolt, bearings, races, lock tabs, seals, spacers, hardware. Fits:XL 1952-1973Additional Information UOM1 - KIT

Chrome rear axle spacer collar. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.41598-52 UO

Rebuild kit includes inner spacer, bearings, races, seals, seal spacers for rebuilding of alloy fron hubs.Accepts 11/16" axle shaft. For use on drum type. Hub and seal not included. Fits:FX...

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube spacer for 1954-1972 XL, 1971- 1972 FX aluminum hubs. Fits:XL 1964-1972 frontFX 1971-1972 frontAdditional Information OEM No

Zinc front axle nut fits 1952-1972 XL. Fits:K 1952-1956XL 1957-1972Additional Information OEM No.43886-52

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Bearing kit includes a pair of bearings and a pair of races. Fits:XL 1952-1973Additional Information OEM No.47521-52

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM

Pivot pin nut. Fits:XL 1952-1973Additional Information OEM No.47512-52 UOM1 - EA

Right side swingarm lock nut. Fits:XL 1954-1973Additional Information OEM No.47515-52 UOM1 - EA<

Chrome sprocket cover with kick starter hole. Includes cover, release worm, adjuster screw, nut, oil deflector, spring and kicker spring stud.For use on kick starter models. Fits:KH 1952-1956XLCH...

Horn cover is louvered style with chrome finish. Fits:FLH 1965-1984FX 1971-1976XL 1965-1971Additional Information OEM No.69138-65<

Horn cover with chrome finish. Fits:FLH 1965-1984FX 1971-1976XL 1965-1971Additional Information OEM No.69138-65

Horn cover with a black finish for high note horns. Fits:FL 1976-1984FLT 1984-1990FXST 1984-1990XL 1965-1978FX 1976-1984Additional Information

Black grooved ignition points cover is vertical 2-hole style. Fits:FXST 1984-1999FLT 1984-1999XL 1970-2003Additional Information UOM1 -