1970

Colony - 9960-1 Chrome Oversize Allen Timing Plug fits '84-'99 FXST, '91-'99 FXD, '57-'85 Sportster Models Chrome allen timing plug is 11/16" - 16 oversize Fitment: FXST 1984-1999 FXD 1991-1999 FLST 1986-1999 FX 1971-1984 FLT 1979-1999 EL...

V-Twin - Shifter Cam Plunger Kit fits '39-'76 FLT Model Shifter cam plunger kit. Fitment: FLT 1939-1976

V-Twin - Starter Gasket fits '67-'80 Sportster Model (OEM #31471-67A) Starter gasket for XL York electric start kit. Fitment: XL 1967-1980 Tech Note: Suggested to use with #32-1642 XL York Electric Start Kit

Sifton - 3/8" Stainless steel Petcock fits '57-74 Sportster Model Stainless steel Sifton petcock with 3/8" National Pipe Thread accepts 5/16" fuel line. Knurled knob turns fuel on and off. Does not include reserve feature.Petcock accepts 1/4 or 5/16"...

V-Twin - 12 Volt H-12 Battery Dry fits '67-'78 XLH, '65-'84 FLH/FL Models (OEM #66007-84) H-12 12 volt battery kit features a black case as original. Kit includes a 12 volt battery, red filler tube, hardware kit and clear vent tube. Battery is lead...

V-Twin - Replica Front Brake Shoe Set fits '71-'72 FX, '64-'72 Sportster Models (OEM #41849-64) Replica front brake shoe set features a die cast construction with linings bonded on. Sold as a pair Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Front Brake Backing Plate fits '71-'72 FX, '64-'72 Sportster Models (OEM #44148-64) Polished aluminum front brake backing plate is for front mechanical drum models Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Front Wheel Hub fits '71-'72 FX, '64-'72 Sportster Models (OEM #43600-64) Front hub wheel includes bearings and snap ring installed and comes completely assembled Fitment: FX 1971-1972 XL 1964-1972

V-Twin - Chrome Header Pipe fits '57 '69 XLCH, '57-'78 Sportster Models (OEM #65454-59) XLCH header pipe features a chrome finish. Header set fits with XLCH wrap around tank only. The rear muffler attaches to the rear strut with clamp and stud kit...

V-Twin - Oil Pump Plug fits '84-'98 FXST, '82-'94 FXR, '57-'76 Sportster Models Oil pump plug. Fitment: FXST 1984-1998 UL 1937-1948 FXR 1982-1994 FLT 1979-1998 FX 1971-1984 EL 1936-1940 FL 1941-1984 WL 1929-1952 FXD 1991-1994 XL...

V-Twin - H-12 Sealed AGM Battery fits '65-'84 FLH, '67-'78 Sportster Models (OEM #66006-65A) H-12 sealed battery features Absorbed Glass Mat technology, which proposed the best balance between cold cranking amps and amp hour capacity. AGM battery...

Motorshop - Pinion Shaft End Nut fits '54-'56 K, '57-'80 Sportster Models (OEM #8011) Pinion shaft end nut.Used on tapered end of pinion shaft when installing shaft into flywheel. Fitment: XL 1957-1980 K 1954-1956

V-Twin - AEE Mid Footpeg Support Bar Set fits '41-'99 FLH/FLT Models Natural stainless steel mid footpeg support bar set is for frames with a Flatside motor. Footpeg arms fit male FX style passenger pegs, not included. Order welded on lower frame...

V-Twin - XR 750 18" x 2.15" Rear Wheel fits '70-'84 XR, '37-'52 W, '57-'78 Sportster Models 18" x 2.15" WR/KR/XR rear wheel includes alloy hub with 9/16" bearings and a lock nut for the sprocket, stainless steel spokes and nipples and an 18" alloy H-C...

V-Twin - XR 750 19" x 2.50" Rear Flat Track Wheel fits '70-'84 XR, '52-'56 K, '57-'78  Sportster Models 19" WR/KR/XR rear wheel features a natural finish hub with 9/16" ball bearings and internals installed. Laced with 6-8 gauge stainless steel...

V-Twin - WR 19" x 3.00" Front Spool Wheel fits '52-'56 K, '57-'72 Sportster Models WR 19" x 3.00" front spool wheel includes a nickel plated hub with 11/16" bearings installed, laced to a 19" x 3.00" chrome rim with stainless steel spokes and nipples...

V-Twin - Teardrop Carburetor Cover Kit fits '41-'65 FL, '71-'85 FX, '71-'87 Sportster Models Teardrop carburetor cover kit includes a 4 bolt Linkert carburetor face. Includes left and right side 1940 style painted tank emblem for right Overhead...

Buchanan Spoke - 19" Stainless Steel Spoke Set Buchanan fits Front '64-'72 Sportster, '71-'72 FX Models Buchanan spoke set features 40 spokes and 40 spoke nipples. Spokes are easy to clean and maintain. For use on a 19" front conventional rim with...

V-Twin - Zinc Plated XL Carburetor Support Bracket fits '57-'85 Sportster Model Zinc plated XL carburetor support bracket mounts to the tappet base stud on Ironhead models and is zinc plated. Order stud kit, separately. Fitment: XL 1957-1985

Motorshop - Black Replica Spool Kick Starter Pedal fits '57-'79 Sportster, '71-'84 FX, '36-'40 EL Models (OEM #2091-16) Replica spool black kicker starter pedal. Order bolt kit separately. Fitment: UL 1937-1948 K 1952-1956 XL 1957-1979 FX...

Drag Specialties - Rear Chain Adjuster Bolt fits '48-'72 Big Twin (3/ 8”-24 x 3”) (OEM #41576-36) Features: Adjuster bolts for rear chain Fitment 1971-1972 Harley-Davidson 1200 Super Glide...

V-Twin - Frame Mount Solo Seat fits '70-'84 FX, '65-'84 FL Models - Black Vinyl Frame mount vinyl solo seat is equipped with molded high density foam padding and a plastic seat pan. This solo seat mounts directly to the frame without springs. The...

V-Twin - MCM FXE Goose Drag Pipe Set fits '70-'84 FXE Model - Chrome Chrome goose style drag pipes feature retro chopper styling in 1-3/4" diameter, with channel mounts and is 35" long with slash cut ends. *NOTE: Does not have baffles or drilled...

Colony - Throttle Roller/Pin Kit fits '54-'65 Big Twin Models (OEM #56276-31, 56278-10) Features: Kit includes hardened and grounded rollers, pins, coil plug set screws and control wire ends Designed specifically for Harley-Davidson­® Made...

Colony - Pushrod Kit fits '57-'85 Sportster w/ Solid Lifters (OEM #17904-57) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...

Colony - Cylinder Base Nut Kit fits '36-'77 Big Twin Models (OEM #0265, 7839) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Fitment 2003-2006 Kawasaki KDX 50 - - 1978-2006 Suzuki JR...

Drag Specialties - Rear Master Cylinder fits '58-'72 FX/FL, 3/4” bore (OEM #41761-58) - Chrome Features: Complete rear master cylinder assembly Polished and chrome-plated Fully assembled for easy...

Custom Dynamics - 5.75" Pro Beam LED Headlamp (OEM #677002-48, 67757-92) Features: Low beam consists of three high-power advanced optical D lenses and a DRL High Beam keeps low beam illuminated and adds two additional advanced optical D lenses with...

Drag Specialties - Oil Plug Temperature Gauge fits '66-'84 FX/FL/FXWG Models Features: Sensitive to oil temperatures up to 350°F Chrome gauge bezel For 66-84 FX, FL, FXWG (3 7/8” L) Fitment 1984 Harley-Davidson Electra Glide...

Drag Specialties - Replacement Oil Tank fits '65-'E82 FX/FL Model (OEM #62483-81) Features: Includes drain/fill plugs, cap assembly and gasket Approximately 3-quart capacity Fitment 1981-1982 Harley-Davidson Electra Glide Classic...

V-Twin - 24 Tooth Compensator Sprocket Kit fits '70-'84 FL, '71-'84 FX Model Kit Includes: 24 tooth sprocket, retainer and cover assembly, a raw compensator sprocket cup, motor sprocket nut , a forged motor sprocket cam, and a sprocket shaft...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing...

V-Twin - Replica XL 2 Gallon Steel Gas Tank Raw fits '57-'78 Sportster Model Features the classic XR 750 style with raw steel construction. Specifications: Petcock located on the right side. Accepts bung-style vented gas cap (must be ordered...

Colony - Cylinder Base Stud Set fits '30-'77 Big Twin Models (OEM #16831-30) Features: Heat-treated for strength and durability Equal or surpass original equipment Made in the U.S.A. Fitment 1977 Harley-Davidson 1200 Low Rider...

Colony - Inner Primary Mount Kit fits '70-'79 Big Twin 4-Speed Models (OEM #16830-54, 4017, 4021) Features: Kits include all required hardware needed to install an inner primary Made in the U.S.A. Replacement Part for...

Colony - Allen Oil Pump Plug Kit fits Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

Colony - S&S Air Cleaner Cover Mounting Screw Kit Features: Custom screws mount cover on S&S air cleaners Three screws per kit Made in the U.S.A. Fitment 1983 Harley-Davidson Sport Glide FXRT - - 1983 Harley-Davidson Electra Glide Classic...

Colony - Seat Post Rod Assembly fits '48-'80 Big Twin Models (OEM #51634-36, 51661-36) Features: Made in the U.S.A. Replacement Part for OEM: 5163436 5166136 5167225 5167425 5179131 Fitment 1984 Harley-Davidson Electra Glide...

Colony - 9400-1 Chrome Transmission Plug fits '58-'80 Big Twin Models (OEM #701A) Features: Chrome-plated, cad or brushed aluminum fill plugs For 4-speed transmission models Made in the U.S.A. Fitment 1980 Harley-Davidson Wide Glide...