Super Glide FX Kick Start

Stainless steel alternator plug retainer bracket bolts to the front left engine mount bolt, and secures the plug from coming out. Fits:FXR 1982-1988FL 1970-1984FX 1971-1984FXST 1984-1988FLT...

V-Twin - 31-0510 - Chrome 1-3/4 inch Universal Solo Seat Nose BracketDescriptionChrome 1-3/4" universal solo seat nose bracket allows the seat to be mounted to frame tubes or mount brackets.*NOTE:...

Ignition coil strap has a chrome finish. Fits:FX 1971-1977FL 1965-1977Additional Information OEM No.31727-72

Zinc plated steel top motor mount features choke tab. Fits:FX 1971-1972FL 1977-1984Additional Information UOM1 - EA

Chrome bracket set includes right and left sides for front fork triple tree spotlamp mounting.Sold in a quantity of 2. Fits:FX 1971-1984Additional Information

Zinc regulator mount bracket attaches to engine mount. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FL 1941-1984Additional Information

Chrome 2 bolt license plate bracket for fender mounting. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information OEM No.59995-5

Black oil cooler bracket is for Sifton and Lockhart horizontal oil coolers. Fits:FXR 1982-1984FL 1958-1984FX 1958-1984Additional Information OEM

Zinc horn mount bracket Fits:FX 1971-1972FL 1971-1972XL 1965-1985Additional Information OEM No.69117-65

Zinc plated air cleaner support bracket. Fits:FL 1971-1977FX 1971-1976Additional Information OEM No.29018-71A

Black ignition coil mount kit includes the outer strip. These stock style brackets mount to existing studs and include nuts, screws, and washers to mount coil.Order separately studs to mount bracket...

Heavy duty top motor mount chrome is a 2 piece and are constructed of 1/4" steel and mounts the motor to the frame. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts the coil.This engine mount does not have the hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information

Top engine mount mounts coil and has a hole to mount a universal key switch. Fits:FX 1971-1984FL 1948-1984Additional Information UOM1 - EA<

Top engine mount replaces stock type and features a chrome finish.Mount does include choke mount for lever assembly. Fits:FX 1971-1972FL 1967-1984Additional Information

Parkerized plain head bolt gas tank mounting kit. Fits:FL 1973-1975FX 1971-1987Additional Information UOM1 - KIT

2:1 FX exhaust header features a black finish. Header has a 1-3/4" diameter.*NOTE: Must order muffler separately. Fits:FX 1971-1972Additional Information UO

2:1 FX exhaust header features a chrome finish. Header has a 1-3/4" diameter.*NOTE: Must order muffler separately. Fits:FX 1971-1972Additional Information O

Replica muffler features the cigar style for kick start models.Also fits boat tail models. *NOTE: Use with 24" cigar muffler, sold separately. Fits:FX 1970-1975Additional Information <

Alphabet FX-FXE exhaust header set features a black finish.Installation may not be compatible with some forward or mid controls. Front and rear header included. *NOTE: Not connected by equalizer tube...

Alphabet FX-FXE exhaust header set features a chrome finish.Installation may not be compatible with some forward or mid controls. Front and rear header included. Front and rear exhaust are two...

Aluminum exhaust repair ports are to be welded on broken or damaged heads.Sold in a quantity of 2.

Replica Shovelhead chrome upsweep drag header set will accept straight fishtail extensions or mufflers. Includes a rear header pipe and a front header pipe.For use on Shovelhead nose cone motors in...

Starter solenoid black plunger boot. Fits:FLT 1979-1982XL 1967-1980FL 1965-1982FX 1971-1982Additional Information OEM No.31441

Horn mount rubber stud measures 5/16" and is ISO type with male-male ends. Fits:FXST 1984-1989FL 1965-1984FX 1971-1984XL 1965-1985FLST 1986-1989Additional Information

Rubber riser bushingSold in a quantity of 2. Fits: FL 1960-1972 FX 1971-1972 K 1954-1956 XL 1957-1972 Additional Information

V-Twin - 28-1997 - Black Solenoid Plunger Rubber BootDescriptionSolenoid plunger boot fits 1965-1988 solenoids. Fits:FXR 1982-1988XL 1967-1980FL 1965-1984FX 1971-1984FXST 1984-1988FLT 1979-1988FLST...

V-Twin - 28-1990 - Plastic Tank Divider PanelDescriptionBlack plastic tank panel can be used on models with die cast dash and frame mount seat. Fits:FX 1971-1972Additional Information

V-Twin - 28-1955 - Rear Master Cylinder Rubber BootDescriptionRear master cylinder boots are sold in an assortment of 5 early and 5 late type. Stock OE replacement. Fits:FL 1958-1978FX...

39mm rubber sleeve for 38mm flatslide carburetors. Fits:FX 1971-1984FL 1966-1984XL 1963-1984Additional Information UOM1 - EA

Black rubber fork boot 33mm is designed for a better fit and improved sealing and wiping action.Sold in a quanity of 2. Fits:XL 1971-1972FX 1971-1972Additional Information

V-Twin - 28-0749 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends are 1/4"-20 coarse thread hex type.The rubber mount can be used for various applications on both...

V-Twin - 28-0619 - Battery Tray ISO StudDescriptionISO dash rubber mounting stud with male-female end has 5/16"-18 UNC thread. The rubber mount can be used for various applications on both stock and...

Red nylon liner for primary chain Fits:FXD 1991-2000FXST 1984-2000FL 1965-1984FX 1971-1984FLST 1986-2000FXR 1984-1994FLT 1984-2000Additional Information

V-Twin - 28-0565 - Battery Tray ISO Mount KitDescriptionChrome ISO mount kit includes two 1/4"-20 rubber mounts and 2 chrome billet covers. Fits:FXST 1984-1999FLST 1986-1999FL 1965-1984FX...

V-Twin - 28-0549 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs with male-male ends have 1/4"-20 UNC thread. The rubber mounts can be used for various applications on both stock and...

V-Twin - 28-0547 - Battery Tray ISO StudDescriptionISO rubber mounting stud with male-male end has 5/16"-18 UNC thread. The rubber mount can be used for various applicatio ns on both stock and custom...

V-Twin - 28-0546 - Battery Tray ISO Stud SetDescriptionISO rubber mounting studs have male-male ends, with 1/4" - 2 0 UNC thread. The rubber mounts can be used for various applications on both stock...

Black rubber kick starter pedal with an FLH logo has a molded slot which allows it to slide onto the steel pedal as does the original rubber pedal. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX...

White rubber kick starter pedal with an FLH logo has a molded slot which allows it to slide onto the steel pedal as does the original rubber pedal. Fits:UL 1937-1948K 1952-1956XL 1957-1979FX...