Super Glide FX Kick Start

V-Twin - 24-0112 - Lower Triple Tree Zinc Dust ShieldDescriptionZinc lower dust shields have an inner diameter of 51mm for fork neck cup kit. Fits:FXD 1991-2005FL 1960-1984FXST 1984-UPFX 1971-1984FXR...

Feature built in rubber seal where bearing contacts the top of the race. This kit chrome cups and dust shields. Fits:FXST 1984-1999FLST 1986-1999FX 1971-1984FLH 1949-1984Additional Information

V-Twin - 24-0089 - Fork Bearing and Seal KitDescriptionFork bearing kit includes two tapered bearings and two seals. Fits:FL 1949-UPXL 1982-UPFX 1970-UPAdditional Information

Fork tubes are stock length. Length is 22-3/4".Before installing, compare new and old tubes. Be sure the stock top plugs it into the new fork tubes. Sold as a pair. ...

This chrome billet aluminum master cylinder with offset hole replaces Wagner style master cylinders.This master cylinder has a bore size of 5/8" and a milled body design. It is 3-1/8" tall. Uses...

Kelsey Hayes type billet master cylinder has 5/8" bore with offset mount holes.This master cylinder can be used with 10mm banjo bolt or flare fittings. Fits:FL 1958-1978FX 1971-1978Additional...

V-Twin - 23-1961 - Rear Master Cylinder Rebuild KitDescriptionRebuild kit includes the top gasket and two boots.For rebuilding disc or drum type master cylinders. Check service manual for required...

Black cap for filler plug. Fits:FL 1958-1978FX 1971-1978Additional Information OEM No.41765-58 UOM

Brass swivel fitting attaches the brake hose to the back of the wheel cylinder backing plate. Fits:FL 1963-1972FX 1971-1972Additional Information OEM No.

Brake shoe cam. Fits:FX 1971-1972XL 1964-1972Additional Information OEM No.44264-64 UOM1 - E

Chrome 5 piece wheel lug set for the front or rear brake drum. Lugs are 3/8" x 20 TPI.*NOTE: Will need a tap brake drum tool for threads. Fits:UL 1937-1948 Front or RearEL 1936-1940 Front or RearFL...

Black rear cast iron brake drum includes riveted sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome rear cast iron brake drum with sprocket. Fits:FL 1967-1972FX 1971-1972Additional Information OEM No.41400-67

Chrome non polished Wagner style rear drum master cylinder is assembled with internals and includes cap and boot. Has rough surface with chrome plated finish.Master cylinder is 3/4" bore. Master...

Rear brake drum assembly features a black finish hydraulic drum and backing plate and a parkerized axle kit.Assembly includes zinc plate axle and hardware. ...

Chrome heavy duty kick starter kit features smooth thick wall kick cover and heavy duty kick starter arm. Kit is partially assembled.Requires the use of a wafer type release bearing kit. Fits:UL...

Replica chrome shifter control kit includes heavy duty shifter bracket, shifter lever, rod, rubber shift peg, footpeg, inner lever, instructions and diagram.*Note: UPS may consider this part as...

Daniel Boone forward control kit with rubber includes right side hydraulic pedal assembly, left side shifter, rubber brake pedal peg and Cat's Paw rubber covered footpeg set.Accepts Kelsey type...

Chrome heavy duty kit features a smooth thick wall kick starter cover and heavy duty forged "thick" beefy kick starter arm. Kit is as shown, unassembled.Requires the use of a wafer type release...

Daniel Boone chrome shifter pedal without rod for left side mounting. Accepts stock kickstand assembly. For 4 or 5 speed application.NOTE: Rod not included, order separately. Fits:FXST 1984-1999FLST...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models.Accepts Kelsey...

Chrome Daniel Boone forward control kit includes left side shifter and a right side brake only to accept Kelsey type rear master cylinder.Accepts Kelsey type master cylinder. Order brake line and...

Police style jockey shift kit clamps to all Big Twin 1-1/8" front down tubes and is for 4-speed transmission with handshift top. Kit includes a gate with detents. The handle is offset for 5 gallon...

Daniel Boone chrome brake control kit fits all hydraulic brake models with disc brakes, for rigid or swingarm frames. Includes correct linkage for 4 speed 1979-1984 rotary top models and chrome...

Lee style jockey pedal assembly features a chrome plate and pedal, black OE frame bracket and parkerized mount bolt kit.The bracket is for mounting to the frame. *NOTE: Must order clutch pull rod...

Partial 4-speed kick starter kit includes all components except the arm, cover and pedal.Includes the clutch lever finger shaft assembly. Order clutch lever shaft and finger kit to complete assembly,...

V-Twin kick starter kit incldes a reinforced polished kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1941-1984 FLH models...

V-Twin kick starter kit incldes a reinforced chrome plated kick starter cover, chrome arm and all gears and hardware to make conversion complete.Includes a chrome offset arm to fit 1954-1984 FL...

Black powder coated billet aluminum standard forward control kit includes black with chrome accent swiss cheese footpegs.*NOTE: The master cylinder is 5/8" bore.

V-Twin - 21-1987 - Stainless Steel Shifter Allen ScrewsDescriptionStainless steel shifter allen screws. Fits:FL 1952-1978FX 1971-1978Additional Information

Chrome pedal and cast bracket attaches to the OE style mount plate for foot clutch operation. The inner shifter arm is removable from the pedal shaft.For use with original Jockey Pedal Brackets from...

Zinc plated shifter rod kit includes shifter rod end, shoulder bolt and shifter rod. Fits:FX 1971-1973FL 1952-1984FX 1980-1984Additional Information

Ratchet jockey shifter lever with offset for aluminum inner primary covers. Fits:FX 1952-1978FL 1952-1978Additional Information UOM1 - EA

Ratchet top transmission rod features a cadmium finish. Fits:FX 1971-1973FL 1952-1984FX 1980-1984Additional Information UOM1 - EA<

Ratchet top transmission rod features a raw finish. Fits:FX 1971-1973FL 1952-1984FX 1980-1984Additional Information UOM1 - SET

Ratchet shifter lever arm with a zinc finish. Fits:FL 1952-1978FX 1971-1973Additional Information OEM No.34447-52

Replica stock length shifter rod kit includes rod, rod end, shoulder bolt and nut with a cadmium finish.Mount pins measure 11-1/8" center to center. Fits:FX 1971-1973FL 1952-1984FX...

Chrome dust shield covers and shifter lever set covers ratchet drum. Fits:FX 1971-1973FL 1952-1978 Early 1978Additional Information UOM1 - EA

Chrome dust shield and shifter lever set. Fits:FL 1952-1978FX 1971-1973Additional Information UOM1 - KIT

Chrome shifter rod kit includes shifter rod end, shoulder bolt, shifter rod. Fits:FX 1971-1973FL 1952-1984FX 1980-1984Additional Information OEM