1971

Oil tank mount kit. Fits:XLH 1967-1978Additional Information UOM1 - KIT ManufacturerV-Twin

Headlamp cowl screw kit features a brushed chrome finish.Includes (4) 5/16"-24 UNF x 3/4", (4) 5/16"-24 UNF x 9/16", (2) 1/4"-20 UNC x 3/4" allen button head screws, and (2) .0289" I.D. x .6299" O.D...

Stainless steel headlamp cowl screw kit. Fits:FL 1960-1984Additional Information OEM No.2824W UOM1 -

Domed fork stem nut with a chrome finish. Fits:XL 1952-1977Additional Information UOM1 - EA Manufacturer<

Rear motor mount bolt kit.Order studs separately. Fits:XL 1954-1981Additional Information UOM1 - KIT Man

Cast dash panel mount studs only. Fits:FXDWG 1991-1995FXST 1984-1995FLST 1986-1995FX 1980-1986FL 1968-1984Additional Information

Luggage rack strut spacers.Spacers can be used with 5/16" bolts. Sold as a set of 4. Fits:FL 1958-1984Additional Information OEM No.90908-58

Stainless steel handlebar switch screws are 8/32 x 1/4" round head. Fits:UL 1937-1948VL 1930-1934FL 1941-1971EL 1936-1940WL 1929-1952J 1926-1929Additional Information

Front brake tube clamp is for the left side. Fits:FL 1949-1972Additional Information OEM No.9963 UOM1

3/8" Internal biter lock washers Fits: XL 1971-1984 Additional Information OEM No. 7130W UOM 25

Auxiliary seat square head bolts with a 5/16"-24 X 7/8" thread.Sold as a set of 2. Fits:FL 1965-1984Additional Information OEM No.3951B

Brass clutch rivets in a pack of 25.3/16" diameter x 9/32" countersunk head rivet. Fits:G 1941-1973FL 1941-1984Additional Information OEM No.<

Acorn type fork triple tree stem nut has a chrome finish without shoulder. Fits:FXST 1984-1999FL 1948-1984FLH 1948-1984Additional Information UO

Acorn type triple tree stem nut with shoulder, 1" - 24 thread. Fits:FXST 1984-1999FLST 1986-1999FL 1948-1984FLH 1948-1984FX 1980-1986Additional Information

Magnetic oil tank drain plug and timing hole plug prevents metal particles from circulating through engine, and oil tank. Plug is 5/8" - 18 UNF. Fits:FL 1965-1984FX 1971-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through engine, and oil tanks. Plug is 3/8" - 24 UNF. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating through the transmission. Plug is 1/2" - 13 UNC. Fits:FX 1971-1984FL 1941-1984Additional Information

Magnetic drain plug prevents metal particles from circulating. Plug is 1/2" - 20 UNF. Fits:FXST 1984-1986FL 1965-1984FX 1971-1984FXR 1984-1986Additional Information

Raw steel motor mount repair bushing kit has a 3/8" inner diameter and a 1/2" outer diameter. This kit is used to align motor after frame mount repair.Drill a 1/2" hole in motor mount. The 3/8"...

Stainless steel lower fork leg drain plugs. Fits:FL 1949-1976Additional Information UOM5 - PK Manufacturer

Chrome stock type primary cover filler and clutch hole cap are easily installed and removable with a standard primary plug wrench.Threaded plugs are 1-1/2" x 12 and 1-3/8" x 12T, not undersize...

Front axle cap cover set includes right and left caps with set screws for glide type forks and anchor stud cap.THis is a three piece set. Fits:FL 1949-1971 front axleAdditional Information

Front axle cap cover set includes right and left caps with a set of screws for glide type forks.Does not include anchor stud cap. Fits:FL 1949-1971Additional Information

Primary cover screw set features a zinc finish. Fits:FL 1965-1975Additional Information UOM1 - SET Manufacture

Allen type rocker arm shaft plugs have a chrome finish and includes sockets and cups. Fits:FL 1971-1984FLT 1979-1983FX 1971-1984FXR 1982-1983XL 1971-1984Additional Information

Clutch cable in braided stainless steel with clear coat fits Sportster models.Stainless steel braided with clear coat clutch cable has a PVC sleeve. The braid is tightly woven for a bright, quality...

Transmission drive speedometer cable features cadmium plating and has an outer diameter of 10mm and a length of 35". Cable has a flexible metal housing and a hex nut fitting. Includes 5/8" top nut...

Zinc transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 6.5mm and is 35" long. Cable is constructed of zinc plated flexible metal casing. Fits:FLHS...

Cable kit is for one side with pull throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing. Kit is pull type.*NOTE: Spiral uses 1-1/8" inner diameter grips...

Replica brake cable measures 60" with inner and outer housing. This cable can be cut to desired length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional Information

Zicad transmission drive speedometer cable with 5/8" top nut. This cable has an outer diameter of 10mm and a length of 35". Cable has a zi-cad plated flexible metal housing and a hex nut fitting...

Cable kit is for one side with push throttle. Kit includes all internal parts. Grips are not included. Features a vinyl cable casing.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides...

Tachometer drive gear assembly features a cadmium finish. Fits:XLH 1971-1980XLCH 1971-1980Additional Information OEM No.92097-71

Black clutch cable feature heavy duty construction designed for reliability and longer service. This 64.56" long cable is 12" over stock. Fits:FL 1970-1984FXEF 1984-1985FXS 1977-1982FXST...

Chrome plated transmission drive speedometer cable with 5/8" top nut. This cable has a length of 35" and has a chrome plated flexible metal housing with a hex nut fitting, for the transmission drive...

Stainless steel braided clutch cable has a casing length of 60.56". Cable is 8" over stock length.Features a heavy duty construction designed for reliability and longer service. Fits:FX 1971-1984FL...

Front Brake cable is a replacement core and casing. This cab le cable is 60" long and can be cut to proper length. Fits:K 1952-1956FX 1971-1972XL 1957-1972GE 1958-1971FL 1950-1971Additional...

Chrome carburetor choke knob. Fits:FL 1971-1984FXST 1984-1989FLST 1986-1989Additional Information OEM No.29214-71

Black carburetor choke knob.*NOTE: The knob is threaded to go onto the shaft. Fits:FL 1971-1984XL 1972-1978Additional Information OEM No.2

Choke cable assembly includes knob, casing, and inner wire. Fits:FLH 1971-1978Additional Information OEM No.29212-71