Sportster XLH900

Fire Power - CHD4-12 - Battery W/Acid Chd4-12 12VFeaturesGlobal Trade Item Number: 191361093203Meets or exceeds OEM specificationsExtremely strong polypropylene cases to withstand impacts and...

Ngk Spark Plugs - B6L - Spark Plug - B6LFeaturesPure alumina silicate ceramic insulator, provides superior strength and better heat transferTriple seals prevent leakageCorrugated ribs prevent...

Yuasa - YHD12 - Battery - YHD-12FeaturesAll batteries are shipped drySpecsProduct NameBattery

Black 1-3/4" exhaust pipe mounting bracket is used to mount drag pipes on mufflers with the use of T bolts. Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits 1957-1978 XL models. Measures...

Chrome 16" sissy bar kit includes a 16" round bar and non-detachable side plates.Bar height is measured from the first bend to top. Fits: XL 1957-1978 Additional Information

Throttle spark control pin roller collar Fits:FL 1941-1972G 1927-1972K 1952-1956J 1921-1929FX 1971-1972EL 1936-1940WL 1929-1952XL 1957-1972F 1910-1920VL 1930-1936Additional Information

Spring Fork throttle plunger Fits:K 1952-1956FX 1971-1972FL 1954-1972XL 1957-1973Additional Information OEM No.56400-53A<

Spring Fork handlebar grip cap screw with tapered end is 8-32 X 1/4". Fits:K 1956-1956G 1954-1972FX 1971-1972FL 1954-1972XL 1957-1972Additional Information

Handlebar throttle end screw is zinc plated and is for use with FLH and XL-K models Fits:K 1952-1956FL 1953-1971XL 1957-1970Additional Information

Spring Fork handlebar throttle spiral is push type.*NOTE: Spiral uses 1-1/8" inner diameter grips on both sides. Fits:K 1952-1956FX 1971-1972XL 1954-1970FL 1954-1970Additional Information

New Old Stock" from 1980, rear hub cap is 4-prong, rusty raw steel style. Fits:XL 1952-1978Additional Information UOM1 - EA

V-Twin - 48-1985 - Primary Cover InsertDescriptionSilver graphics with black background. Fits:XL 1971-1976Additional Information

AMF parts book for 1954-1978 Sportsters. Fits:XL 1954-1981Additional Information UOM1 - EA Manufacturer

Parts and manual set includes 3 different books for 1970-1984 Ironhead models.This set features the following books: Spare Parts Book for 1954-1965 XL, XLH Service and Parts Manual and V-Twin XL...

Sportster service and parts manual is for 1970-1976 XL models.Shop book includes service, parts and dealer tips for the models and years that are listed. Features 384 pages. ...

Silver graphics with black background. Fits:XL 1971-1976Additional Information UOM1 - EA Manufacturer

V-Twin - Black Leather Solo Seat Kit fits '52-'78 Sportster Models Includes Bates style tuck and roll leather solo seat, chrome 2" spring and mounting hardware. Note: UPS may consider this part...

XLCH solo seat kit includes a replica black leather solo seat with a zinc front solo seat nose bracket, chrome seat spring support bar and a chrome 2" seat spring set.Solo seat kit requires frame to...

Spoke set features 40 spokes and 40 spoke nipples.Spokes are easy to clean and maintain. For use on a 19" front drop center rim with a front brake drum alloy hub. Measurement from center of spoke...

XR rear hub includes the bearings to accept a 11/16" axle and a 51 tooth sprocket.*NOTE: Rear sprocket adapter and lock nut tool included. Fits: XL 1957-1989 Additional Information

Chrome hubcap for rear hub. Fits:XLCH 1957-1978XLH 1957-1978Additional Information UOM1 - EA Finish

XR 750 front spool hub is full alloy construction and features a natural finish with 9/16 innner diameter ball bearings. Also includes center and center tube and hex nut.Accepts 11/16" axle shaft and...

V-Twin - 44-1959 - Swingarm Pivot Bolt KitDescriptionSwingarm pivot bolt kit includes the swingarm pivot bolt, race set, and lock tab. Fits:XL 1952-1973Additional Information

Assembly includes a parkerized pivot bolt, bearings, races, lock tabs, seals, spacers, hardware and zinc plated pivot pin.. Fits:XL 1952-1973Additional Information

Zinc front axle kit includes 6" bearing surface length axle and nut kit.*NOTE: For 11/16" axle diameter. Fits:K 1952-1956FX 1971-1972XL 1957-1972Additional Information

Front hub dust shield. Fits:XL 1952-1972Additional Information OEM No.43636-52 UOM1 - EA <

Assembly includes a chrome pivot bolt, bearings, races, lock tabs, seals, spacers, hardware. Fits:XL 1952-1973Additional Information UOM1 - KIT

Chrome rear axle spacer collar. Fits:XL 1957-1978K 1952-1956Additional Information OEM No.41598-52 UO

Rebuild kit includes inner spacer, bearings, races, seals, seal spacers for rebuilding of alloy fron hubs.Accepts 11/16" axle shaft. For use on drum type. Hub and seal not included. Fits:FX...

Rear wheel hub bearing washer. Fits:XL 1957-1978K 1954-1956Additional Information OEM No.41195-63 UOM

Bearing spacer set. Fits:XL 1952-1981Additional Information OEM No.47518-52 UOM1 - SET

Chrome rear axle left side spacer has an overall length of 2".*NOTE: For 11/16" axle diameter. Fits:XL 1957-1978K 1952-1956Additional Information O

Rear wheel hub bearing tube spacer for 1963-1978 XL rear. Fits:XL 1963-1978 rearAdditional Information OEM No.41185-63

Front wheel hub bearing tube spacer for 1954-1972 XL, 1971- 1972 FX aluminum hubs. Fits:XL 1964-1972 frontFX 1971-1972 frontAdditional Information OEM No

Zinc front axle nut fits 1952-1972 XL. Fits:K 1952-1956XL 1957-1972Additional Information OEM No.43886-52

Axle with flat head and threaded end has a 10-1/2" bearing surface lengthand can be used to replace a worn out or damaged axle. Threaded end measures 5/18 x 18.May be used in the Timken hubs, may...

Axle with threaded end has a 6" bearing surface length and and can be used to replace a worn out or damaged axle.Order nut kit separately. Fits:K 1952-1956FX 1971-1972XL 1957-1972Additional...

Dust shield set for the swingarm. Fits:XL 1952-1981Additional Information OEM No.47519-52 UOM1 - SET<

Bearing kit includes a pair of bearings and a pair of races. Fits:XL 1952-1973Additional Information OEM No.47521-52

Swingarm pivot bolt features a chrome finish. Fits:XL 1952-1981Additional Information OEM No.47511-52 UOM