Sportster XLH900

Replica horn kit includes bracket, horn cover and ISO mount rubber stud. Fits:XL 1971-1985Additional Information UOM1 - KIT

V-Twin - 33-1955 - Chrome Tail Lamp and Bracket KitDescriptionChrome early style tail lamp with plate bracket and gasket. Fits:FL 1955-1972FX 1971-1972XL 1955-1972Additional Information

XL guide lens tail lamp assembly features a primer finish with the internals, a 6 volt bulb, a plastic top license plate lens and a guide glass lens for detail. Fits:FL 1955-1972XL...

Replica primer tail lamp includes A 12 volt 23/8 watt clear bulb, lens housing, plastic red lens and internals.A replica red galss lens in included, but uninstalled. *NOTE: Order gasket separately...

Original style chrome 12 volt tail lamp includes additional plastic lens with blue dot installed. Fits:FL 1955-1972XL 1957-1972Additional Information UOM

V-Twin - 33-0838 - Chrome 1955 Style Tail Lamp KitDescriptionChrome 1955 style tail lamp kit includes plastic lens, mount gasket and additioinal lens with blue dot.Installed for custom installation...

Replica black 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL 1954-1973FX...

Replica chrome 5-3/4" stock style headlamp includes 12 volt sealed beam and has two studs on the back for wiring.*NOTE: For show or decorative use only and are not D.O.T. approved. Fits:XL...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter and includes rear cylinder timing adjustment for rate of advance. Kit includes coil, 8.5mm wires, sensor...

V-Fire ignition kit is single fire and can be set for street or race, electric or kick starter, and includes rear cylinder timing adjustment for rate of advance.Ignition kit fits all 1970-1998...

Tail lamp wiring features PVC covered wires. Fits:XL 1970-1972FX 1971-1972FL 1970-1972Additional Information UOM1 - EA <

Starter main wiring harness set features plastic covered wires. Main wiring harness includes the high tension wires only.Order handlebar, tail lamp and turn singal wires separately. Fits:XLH...

Main wiring harness features plastic covered wires. Main wiring harness only.Order handlebar, tail lamp, and turn signal wires separately. Fits:XLH 1970-1972 Electric start modelsAdditional...

Wiring harness kit features plastic covered wires. Builders kit harness includes main harness, handlebar, tail lamp and starter wires. Wiring harness fits XLH electric start models . Fits:XLH...

Prestolite starter motor repair kit includes thru bolts. Fits:FL 1966-1981XL 1967-1973XL 1977-1980GE 1966-1973Additional Information UO

Stainless steel base ignition advance unit without cam is heat treated weights for 1970-up mechanical advance ignitions.Ignition Circuit Breaker Cam OEM #32542-70A and bolt or washers are not...

V-Twin - 32-2049 - V-Fire PointDescriptionV-Fire point features a 1 piece design. Fits:FL 1970-1978XL 1971-1978Additional Information

V-Twin - 32-1913 - Single Fire IgnitionDescriptionSingle fire ignition fires the front and rear cylinders independently of each other, which allows accurate timing of each cylinder.Stock ignition...

Weed wacker coil for Dave Hale. Fits:XL 1970-1980Additional Information UOM1 - EA ManufacturerV-Twin<

XLH battery cable set for electric start models.Sold as a set of 3, which includes one 8-1/2" braided flat unsheathed battery cable and two 15-1/2" black positive battery cables. Fits:XLH...

Starter installation screw kit is for electric start conversion kits by V-Twin. Fits:XL 1967-1979Additional Information UOM1 - KIT

XL 12 volt alternator gear kit includes gear, nut, spacer and deflector washer. Kit is for 32E 12 volt style alternator.Accepts 1/4 or 5/16 mount screws. Fits:XL 1958-1983Additional Information

V-Fire point set is the exact replacement for the years listed.Sold in a pack of 5. Fits:FL 1970-1978XL 1971-1978Additional Information OEM No.

Chrome alternator bolts on in place of original 12 volt generator. Chrome state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses the rotor...

Black alternator bolts on in place of an original 12 volt generator. Black solid state regulator, gear, gasket and mount screw set are included.*NOTE: The outer cover with the large hex nut houses...

V-Fire single fire ignition kit includes a V-Fire single fire ignition kit with a chrome 12 volt coil.Mounts to stock bracket and accepts stock type coil covers. Works with most aftermarket single...

V-Fire dual fire ignition kit includes a V-Fire dual fire ignition kit with a black 12 volt coil.Includes a mechanical advance unit and all hardware. *NOTE: Dual fire is where there are two sparks at...

XLH battery cable set includes a black positive/negetive 15-1/2" cable and a braided flat negative 9-1/2" cable.Sold as a set of 2. Fits:XLH 1967-1978Additional Information

This V-Fire Tuneable Ignition Advance Assembly includes a st ainless advance base, points plate with "Blue Streak" points , and condenser with hardware.Three pairs of color coated springs are also...

V-Fire ignition kit is single fire and includes mechanical advance unit, hardware, and wiring instructions.Black wire is for the front and the white wire is for the rear. Order coil separately...

V-Fire dual fire ignition kit includes a mechanical advance unit and all hardware.Ignition kit is dual fire where there are two sparks at the same time. Critical wiring instructions are included...

Battery cable is braided, flat, and unsheathed ground strap.Fits negative terminal on battery. Fits:XLH 1967-1972Additional Information OEM No.7023

Battery cable for negative post. Cable is flat, braided, unsheathed and a 4 gauge with 17/64" and 11/32" hole sizes on heat shielded terminal ends. Fits:XLH 1967-1972Additional Information <

Black battery cable is 8 gauge with 17/16" and 11/32" hole size on heat shielded terminal ends.PVC plastic coated cable replaces original with heat shield terminal ends. Used for solenoid to battery...

Starter is 1.4kW unit that generates more power and shaft speed than the original type 0.8kW starter.Starter includes housing to mount to 1965-1978 Big Twin. Unit is Presolite high output type...

V-Fire ignition advance unit features stainless steel base, heat treated weights, and cam center screw for 1970-up mechanical advance ignition. Fits:FX 1971-1978FL 1970-1978XL 1970-1978Additional...

Relay to ground wire. Fits:XL 1970-1980FXE 1971-1978Additional Information OEM No.70169-70 UOM

Zinc horn bracket for left side Fits:XL 1952-1984Additional Information OEM No.69031-57 UOM1 - EA

V-Twin - 31-4057 - Exhaust Bracket ChromeDescriptionChrome exhaust bracket is for mounting drag pipes on mufflers with the use of T bolts.Originally BK-4, by Cycle Shack, 1970-2018. Bracket fits...

Solo seat hardware mount kit includes nose brackets, springs and rear bracketsUse mount kit for smaller type solos such as K or CH types. Fits:XL 1952-1978Additional Information